My mud guards are in, but no Camaro yet... - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

edog · 04-03-2009, 10:30 PM

I ordered the mud gards for my Camaro, and it only took one day to get them to the dealer. They are patiently waiting for the car to be built and delivered, where they will install and add the last piece of the exterior preventing damage from flying debris.

Is anyone else ordering the mud guards. I think it will change the appearance to a wider stance from the back. Any thoughts?

Rodrunner · 04-04-2009, 08:28 PM

Great, a second guinea pig. Thanks, edog.

Yes, detroitboy is also getting them. Check out this thread: http://www.camaro5.com/forums/showth...480#post381480

edog · 04-04-2009, 08:36 PM

Saw it earlier. I had posted so I did not add to it.

I would love to see what they look like on the car, but for now they sit on a shelf at the dealer waiting for the car to roll in.

RallyFever · 04-04-2009, 08:42 PM

Quote:

Originally Posted by edog

Saw it earlier. I had posted so I did not add to it.

I would love to see what they look like on the car, but for now they sit on a shelf at the dealer waiting for the car to roll in.

When will your car arrive?

Has it been built yet?

WCoolBreeze · 04-04-2009, 09:17 PM

When you have your car and these are installed, please post a picture of how they look. I am considering getting them, but am waiting until I see them on a Camaro before deciding. I did pay for and order today the car cover, sill plates and the V-6 engine cover in Red Jewal Tint. Still waiting on the dealership to tell me when my car will arrive.

Walt B.

edog · 04-04-2009, 09:30 PM

I am one of the IOM that have been pulled and accepted by GM, but just sitting there. No TPW yet, but when it comes in I told the dealer to put them on. I do not want to see it w/o them installed.

I will most likely post the pictures from the dealer before I leave using my phone.

SScattergunSS · 04-05-2009, 03:03 AM

I haven't ordered 'em yet...I haven't got my Camaro yet either, as far as that goes. But I really do believe I am going to be adding 'em to my car. They way I'm picturing everything, I do think they'll not only look great (I hope) but actually serve a purpose too.

detroitboy · 04-10-2009, 10:31 PM

Mine arrived and look great. Beautiful finish quality. Now I just need the car to put them on. I'm thinking about getting a dovetail spoiler painted and having that ready to go too. But my paint guy might need the car to match to.

SummoneR · 04-11-2009, 01:02 AM

Quote:

Originally Posted by edog

I am one of the IOM that have been pulled and accepted by GM, but just sitting there. No TPW yet, but when it comes in I told the dealer to put them on. I do not want to see it w/o them installed.

I will most likely post the pictures from the dealer before I leave using my phone.

That's the kind of dedication we like to hear!!!

Quote:

Originally Posted by detroitboy

Mine arrived and look great. Beautiful finish quality. Now I just need the car to put them on. I'm thinking about getting a dovetail spoiler painted and having that ready to go too. But my paint guy might need the car to match to.

This is the spoler on the Dale Jr. car right? that others call a duck tail or a blade spoiler? I really like that spoiler too!! I plan to do that with the GFX painted to match and silver full rally stripes... I too am waiting to see how it looks on an actuall car... but I think edog is right, it may add a wider appearance which may look good!

fixxer56 · 04-11-2009, 07:32 AM

http://www.camaro5.com/forums/showthread.php?t=18109
This thread has plenty of pictures of all the current accessories availabe according to poster

04-03-2009, 10:30 PM	#1
edog Drives: 2010 2SS/RS IOM Join Date: Oct 2008 Location: F'BURG VA Posts: 3,832 View My Garage	My mud guards are in, but no Camaro yet... I ordered the mud gards for my Camaro, and it only took one day to get them to the dealer. They are patiently waiting for the car to be built and delivered, where they will install and add the last piece of the exterior preventing damage from flying debris. Is anyone else ordering the mud guards. I think it will change the appearance to a wider stance from the back. Any thoughts? __________________ Update...Build in process, Forged Rods, Pistons and rings, Johnson Lifters, NOVI1500 ECS SC, 13lb boost or more, LS3 Conversion 114/228/241 COMP CAM, Frostbite 4 row Aluminum radiator, 6L80 built, Circle D 6L80 PRO SERIES MULTI 258MM 2D, Stock 3.45 gears, 1-7/8 American Racing Headers w/HF cat, X-Pipe, Lingenfelter dual fuel pump, E-85 flex sensor, ATI super damper pulley, Ported TB, 160 therm, Trans cooler, Pedder's sways/end links/sub frame bushings, BMR trailing arms & toe rods, Coil overs. HP/TQ pending Last edited by edog; 04-04-2009 at 05:07 PM.

04-04-2009, 08:28 PM	#2
Rodrunner Senior Member Drives: 2010 SS/RS, '06 350Z Join Date: Oct 2008 Location: So. Maryland Posts: 2,326	Great, a second guinea pig. Thanks, edog. Yes, detroitboy is also getting them. Check out this thread: http://www.camaro5.com/forums/showth...480#post381480 __________________ 2SS/RS - Black/Black - CGM Rally Stripes - Auto - VIN 10171

04-04-2009, 08:36 PM	#3
edog Drives: 2010 2SS/RS IOM Join Date: Oct 2008 Location: F'BURG VA Posts: 3,832 View My Garage	Saw it earlier. I had posted so I did not add to it. I would love to see what they look like on the car, but for now they sit on a shelf at the dealer waiting for the car to roll in. __________________ Update...Build in process, Forged Rods, Pistons and rings, Johnson Lifters, NOVI1500 ECS SC, 13lb boost or more, LS3 Conversion 114/228/241 COMP CAM, Frostbite 4 row Aluminum radiator, 6L80 built, Circle D 6L80 PRO SERIES MULTI 258MM 2D, Stock 3.45 gears, 1-7/8 American Racing Headers w/HF cat, X-Pipe, Lingenfelter dual fuel pump, E-85 flex sensor, ATI super damper pulley, Ported TB, 160 therm, Trans cooler, Pedder's sways/end links/sub frame bushings, BMR trailing arms & toe rods, Coil overs. HP/TQ pending

04-04-2009, 09:17 PM	#5
WCoolBreeze 2SS Drives: 2016 2SS, Red Garnet Tint Join Date: Nov 2008 Location: Imperial, CA Posts: 1,343	When you have your car and these are installed, please post a picture of how they look. I am considering getting them, but am waiting until I see them on a Camaro before deciding. I did pay for and order today the car cover, sill plates and the V-6 engine cover in Red Jewal Tint. Still waiting on the dealership to tell me when my car will arrive. Walt B. __________________ 2016 Camaro 2SS 2005 Dodge Magnum R/T (Yes it has a Hemi) 1987 Camaro RS (California Special) - For Sale Gen6, 2016 Camaro 2SS, Red Garnet Tint (with Silver Rally Stripes) Ordered: 2-12-2016 TPW: 3-7-2016 Built: 3-7-2016 VIN 1G1FH78G0157626 Delivered: 4-26-2016

04-04-2009, 09:30 PM	#6
edog Drives: 2010 2SS/RS IOM Join Date: Oct 2008 Location: F'BURG VA Posts: 3,832 View My Garage	I am one of the IOM that have been pulled and accepted by GM, but just sitting there. No TPW yet, but when it comes in I told the dealer to put them on. I do not want to see it w/o them installed. I will most likely post the pictures from the dealer before I leave using my phone. __________________ Update...Build in process, Forged Rods, Pistons and rings, Johnson Lifters, NOVI1500 ECS SC, 13lb boost or more, LS3 Conversion 114/228/241 COMP CAM, Frostbite 4 row Aluminum radiator, 6L80 built, Circle D 6L80 PRO SERIES MULTI 258MM 2D, Stock 3.45 gears, 1-7/8 American Racing Headers w/HF cat, X-Pipe, Lingenfelter dual fuel pump, E-85 flex sensor, ATI super damper pulley, Ported TB, 160 therm, Trans cooler, Pedder's sways/end links/sub frame bushings, BMR trailing arms & toe rods, Coil overs. HP/TQ pending

04-05-2009, 03:03 AM	#7
SScattergunSS ~ Love or Lust ~ Drives: R6P 1SS/RS BLK/L99 Join Date: Oct 2008 Location: With My CynAgain Posts: 25,198	I haven't ordered 'em yet...I haven't got my Camaro yet either, as far as that goes. But I really do believe I am going to be adding 'em to my car. They way I'm picturing everything, I do think they'll not only look great (I hope) but actually serve a purpose too. __________________ ~ Then conquer we must, when our cause it is just, And this be our motto, "In God is our trust." And the Star Spangled Banner in triumph shall wave O'er the land of the free and the home of the brave ~ Francis Scott Key ~

04-10-2009, 10:31 PM	#8
detroitboy Pinholic Drives: 11 Silverado, 08 Shelby GT500 Conv. Join Date: Nov 2008 Location: Macomb, Mi Posts: 697	Mine arrived and look great. Beautiful finish quality. Now I just need the car to put them on. I'm thinking about getting a dovetail spoiler painted and having that ready to go too. But my paint guy might need the car to match to. __________________ Almost had a 2SS/RS, IOM, orange accent interior, 6 speed manual, sunroof & polished wheels ordered 01/19/07 3000 - 2/27/09 3400 - 3/27/09 3800 - 4/17/09 (built and lost in the vortex) ship date ??????? (I gave up and got a GT500) 5/11/09 - order cancelled 5/27/09 - vehicle arrived at dealership for whoever bought it after me

04-11-2009, 07:32 AM	#10
fixxer56 Thin Blue Line Drives: ABM 2LT/RS #10094 Join Date: Oct 2008 Location: SE Pa Posts: 1,386 View My Garage	http://www.camaro5.com/forums/showthread.php?t=18109 This thread has plenty of pictures of all the current accessories availabe according to poster __________________ One of the "Few Blue"

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Songs About Camaros (for your driving pleasure)	Emjay	5th Gen Camaro SS LS LT General Discussions	74	12-18-2014 01:42 AM
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 08:33 PM
Ambient lighting (ABL) - the FINAL update = LIMITED TO DOOR PANELS	CamaroScotty	5th Gen Camaro SS LS LT General Discussions	338	04-15-2009 06:33 PM
UPCOMING CAMARO IMPORTANT DATES	CamaroScotty	5th Gen Camaro SS LS LT General Discussions	125	01-11-2009 01:31 AM
Camaro Accessories from SEMA	FenwickHockey65	5th Gen Camaro SS LS LT General Discussions	1	11-03-2008 03:25 PM