Tucson Camaro's - Page 306 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

afhunter · 11-08-2011, 12:46 PM

Quote:

Originally Posted by jasycz28

If you buy the full kit then you don't need anything else to do the install. But I highly recommend getting a custom tune. Whipples tune is crap and I am glad I had 100 octane in it whenever I went into high rpm's. If you buy the kit from Jannetty he can do the tune for you if you already have a SCT tuner or if you buy it seperate. If you don't have a SCT tuner already then I would get a custom dyno tune through one of the local guys. There are a few we can run down when the time comes. If you are going to get a custom dyno tune from a local guy then I would look at TandT performance for the full kit. They had the lowest price when I bought my kit.

If you don't mind me asking what it cost you for everything?

jasycz28 · 11-08-2011, 04:11 PM

Quote:

Originally Posted by afhunter

If you don't mind me asking what it cost you for everything?

Full Whipple kit (black) - $6650 I did find it a little cheaper after the fact. PMed you with that info.
Dyno Tune approximately ~ $500
Install - FREE (I do my own work

)

I had to buy a few tools but nothing big.

If you are an LS3 and if it would work, I would have to call superchips to find out. I still have my superchips tuner so if you could get a kit with injectors but minus the tuner, I would let you use mine until you get dyno tuned. Could save you a few bucks.

jasycz28 · 11-08-2011, 04:17 PM

Quote:

Originally Posted by slickmetal

Heres the one I have inline...there are several others, but if the deal is right this is the one I'll go with:

http://www.qbuickgmc.com/VehicleDeta...-AZ/1362281853

Hate to see it go. Ive tried to keep it and have the truck but the GF can't afford the payment of the Camaro on her income.

Also with the growing idiots on the road - especially the one guy on base with his new Audi A4 who thinks he has some sort of bawls - its only going to get me into trouble. It was fun while it lasted. But if no deals go through, then I guess i will keep it.

I hope you don't get rid of your Camaro but if you have to you should swap throttle bodies with me before you do.

slickmetal · 11-08-2011, 10:07 PM

Car is gone. Gave me a great trade in value. All I have is some of the stock parts if anyones interested.

slickmetal · 11-08-2011, 10:08 PM

Quote:

Originally Posted by LimaCharlie

It's a nice truck but why not just get a stock Sierra/Silverado without the dealer installed wheels/tires/suspension. It will be cheaper overall if you just install the stuff later. Who knows.....you might actually like the stock height/wheels/tires.

Dealers like to hike the price up on their dealer installed packages.....

ITs ok I basically got all the Rocky Ridge stuff for next to nothing w/rebates and equity of the car. You will see the truck tomorrow!

gotroost · 11-08-2011, 10:10 PM

Hey Tucson folks. JRE 470 kit will be ordered soon, but i am still looking for a cam installer. The only local (and reputable based on experience) shop wants to estimate 21 hours since its an unknown to them. Not feeling real comfortable since Ted at Jannetty estimate 11-12 hours. Recommendations are appreciated. I know I may be spending a lot on a cam, but I love the rumble and this will be the foundation for a future SC and maybe even a forged bottom end.

yzrider58 · 11-08-2011, 10:48 PM

Quote:

Originally Posted by slickmetal

ITs ok I basically got all the Rocky Ridge stuff for next to nothing w/rebates and equity of the car. You will see the truck tomorrow!

Maybe now you can just drive over that A4 instead of racing it lol

How bout glamour shots!

Bodih · 11-08-2011, 11:05 PM

Anyone interested in a cruise to Sierra Vista Friday to take part in the Veteran's Day Parade? We need 5 or 6 cars total to register as a car club. Tony needs to register with them by Thursday. I planned to bring it up at the meeting this week, but it will be too late by then. Let me know and we'll get the info to Tony.

LimaCharlie · 11-08-2011, 11:37 PM

Quote:

Originally Posted by slickmetal

ITs ok I basically got all the Rocky Ridge stuff for next to nothing w/rebates and equity of the car. You will see the truck tomorrow!

Sad to hear the Camaro is gone. Oh well, time goes on! Look forward to seeing the truck.

alab32 · 11-08-2011, 11:51 PM

Quote:

Originally Posted by Bodih

Anyone interested in a cruise to Sierra Vista Friday to take part in the Veteran's Day Parade? We need 5 or 6 cars total to register as a car club. Tony needs to register with them by Thursday. I planned to bring it up at the meeting this week, but it will be too late by then. Let me know and we'll get the info to Tony.

I dont think I have anything going on... what time would we be looking at rolling?

kinyonZ28 · 11-09-2011, 12:36 AM

Quote:

Originally Posted by Bodih

Anyone interested in a cruise to Sierra Vista Friday to take part in the Veteran's Day Parade? We need 5 or 6 cars total to register as a car club. Tony needs to register with them by Thursday. I planned to bring it up at the meeting this week, but it will be too late by then. Let me know and we'll get the info to Tony.

I'm in. what time?

copper3000 · 11-09-2011, 12:57 AM

Quote:

Originally Posted by Bodih

Anyone interested in a cruise to Sierra Vista Friday to take part in the Veteran's Day Parade? We need 5 or 6 cars total to register as a car club. Tony needs to register with them by Thursday. I planned to bring it up at the meeting this week, but it will be too late by then. Let me know and we'll get the info to Tony.

We are in but I believe it's in Douglas not Sierra Vista.

FLYNNZL1 · 11-09-2011, 09:19 AM

Reminder
Monthly Meeting:
7:00pm to 8:00pm the second Thursday of every month at Watson Chevrolet. Enter Watson's parking lot head toward the parts dept, follow the road around back to the SE of the dealership. Plenty of Parking, no fees or dues. This is a good way to talk and share information, and make plans.
Map Link:
http://maps.google.com/maps?um=1&ie=...ed=0CEAQnwIwAQ

I will be in Phoenix Thursday and Friday this week, so Bob T, will be holding the meeting.

armysig · 11-09-2011, 09:30 AM

Quote:

Originally Posted by Bodih

Anyone interested in a cruise to Sierra Vista Friday to take part in the Veteran's Day Parade? We need 5 or 6 cars total to register as a car club. Tony needs to register with them by Thursday. I planned to bring it up at the meeting this week, but it will be too late by then. Let me know and we'll get the info to Tony.

I'll do it....since I LIVE HERE......

11-08-2011, 10:07 PM	#4274
slickmetal Drives: 2013 Black ZL1 A6 Join Date: Feb 2011 Location: AZ Posts: 491 View My Garage	Car is gone. Gave me a great trade in value. All I have is some of the stock parts if anyones interested. __________________ - 2013 Black ZL1 - A6 - Lingenfelter/Cordes Stage 2.5 packages E85 - FORE Fuel System - Kooks LTHs - Magnaflow Cans - Rotofab CAI/Big Gulp/Coolant Tank - Savini 3pc Forged - Underhood Dress Up (ACC & Drake & Moroso) - Hurst Shifter Kit - Custom Audio w/ JL Audio Sub/Amp/Stealthbox - Hand Polished Brace - Oracle Ghost Sidemarkers - LEDs everywhere - 624/617 on E85 & 545/548 on 91 (Sept 2015) - 693rwhp (Dec 15)

11-08-2011, 11:05 PM	#4278
Bodih I Got My Orange Crush Drives: it like I stoles it... Join Date: Jan 2011 Location: Tucson, AZ Posts: 2,079	Anyone interested in a cruise to Sierra Vista Friday to take part in the Veteran's Day Parade? We need 5 or 6 cars total to register as a car club. Tony needs to register with them by Thursday. I planned to bring it up at the meeting this week, but it will be too late by then. Let me know and we'll get the info to Tony. __________________ My love is in league with the freeway. Its passion will ride, as the cities fly by, and the tail-lights dissolve in the coming of night. And the questions in thousands take flight ~Robert Plant - Big Log~

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
70 Camaros reported at Wentzville, MO Rail Yard	Liberty1	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	34	08-26-2009 11:40 AM
Need Pic's of Camaro's!!!!!!!!	Camarosales70	Camaro Photos \| Spyshots \| Video \| Media Gallery	0	07-05-2009 12:14 AM
Chance to drive 2010 Camaros......	fbodfather	5th Gen Camaro SS LS LT General Discussions	15	06-18-2009 09:13 AM
Ton of new Camaros on cars.com	Shadowmind	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	5	06-01-2009 10:19 PM
Firsthand report: just sat in two Camaros at the Cleveland Auto Show	Attorneyguy	5th Gen Camaro SS LS LT General Discussions	154	03-01-2009 10:40 PM

11-08-2011, 10:10 PM	#4276
gotroost Drives: 2021 Crush ZL1 1LE Join Date: Oct 2009 Location: Sierra Vista, AZ Posts: 1,119 View My Garage	Hey Tucson folks. JRE 470 kit will be ordered soon, but i am still looking for a cam installer. The only local (and reputable based on experience) shop wants to estimate 21 hours since its an unknown to them. Not feeling real comfortable since Ted at Jannetty estimate 11-12 hours. Recommendations are appreciated. I know I may be spending a lot on a cam, but I love the rumble and this will be the foundation for a future SC and maybe even a forged bottom end.

11-09-2011, 09:19 AM	#4283
FLYNNZL1 Account Suspended Drives: Man Join Date: Apr 2009 Location: Usa Posts: 3,175 View My Garage	Reminder Monthly Meeting: 7:00pm to 8:00pm the second Thursday of every month at Watson Chevrolet. Enter Watson's parking lot head toward the parts dept, follow the road around back to the SE of the dealership. Plenty of Parking, no fees or dues. This is a good way to talk and share information, and make plans. Map Link: http://maps.google.com/maps?um=1&ie=...ed=0CEAQnwIwAQ I will be in Phoenix Thursday and Friday this week, so Bob T, will be holding the meeting.