You are browsing camaro5 
 |
|
11-11-2011, 02:55 PM
|
#1 |
     Drives: 10 IBM SS RS/14 1500 Z71 Join Date: Jan 2010
Location: Lehigh Valley, PA
Posts: 1,577
|
HAVOC spoiler fitment
Anyone with the HAVOC spoiler have problems with it not sticking between the taillights??
My body shop has tried to refit it twice and it keeps releasing in the back. Possibly defective? Or a design flaw? 
|
|
|
|
11-11-2011, 02:56 PM
|
#2 |
|
SoCal Mayhem
Drives: 2010 Camaro 1SS/RS Join Date: Aug 2008
Location: Foothill Ranch, CA
Posts: 5,488
|
I think some have resorted to wood screws
__________________
 |
|
|
|
|
11-11-2011, 03:02 PM
|
#3 |
|
Drives: 10 IBM SS RS/14 1500 Z71 Join Date: Jan 2010
Location: Lehigh Valley, PA
Posts: 1,577
|
Not a nail gun? lol
|
|
|
|
|
11-11-2011, 03:10 PM
|
#4 |
 
Drives: 2011 LS CGM / '01 Trans am (ls6) Join Date: Jul 2011
Location: Kansas city, MO
Posts: 84
|
Mine keeps coming loose on the passenger side and the drone makes a nasty rattle in the rear of the car because of that loose side
|
|
|
|
|
11-11-2011, 03:12 PM
|
#5 |
|
Rolling along...
|
The HAVOC spoiler never seemed to fit quite right so I'm going with "Design flaw".
Oh, and I remember that one from SEMA 2009...screws...LOL...
__________________
|
|
|
|
|
11-11-2011, 03:15 PM
|
#6 |
|
Drives: 10 IBM SS RS/14 1500 Z71 Join Date: Jan 2010
Location: Lehigh Valley, PA
Posts: 1,577
|
Actually, that looks acceptable compared to mine.
 How much is a dovetail spoiler? 
|
|
|
|
|
11-11-2011, 03:24 PM
|
#7 |
|
Rolling along...
|
 Sorry to hear that. Probably should have just bought a painted MPD1 spoiler and been done with it for about $400. http://www.camaro5.com/forums/showthread.php?t=96112
__________________
|
|
|
|
|
11-11-2011, 04:58 PM
|
#8 |
|
Drives: 10 IBM SS RS/14 1500 Z71 Join Date: Jan 2010
Location: Lehigh Valley, PA
Posts: 1,577
|
I don't like that one. Looks too 'flat' to me.
|
|
|
|
|
11-11-2011, 06:16 PM
|
#9 |
|
TEAM LLT ! NY5thGEN
|
havoc products are ass.......
__________________
 |
|
|
|
|
11-11-2011, 06:37 PM
|
#10 |
Drives: 2010 2ss ss/rs abm, 2016 2ss/rs hbm Join Date: Feb 2009
Location: N. Phx, Az
Posts: 1,332
|
Mine fits great. Did your bodyshop bake it after they painted it? If they did, depending on how they laid it out could have warped it. Did you test fit it before paint to make sure there were no problems? I test fitted all my body parts first. I had a problem with another body kit prior, test fit great, but after paint and bake it was warped.
I've had my Havoc front and rear spoiler and rear diffusor for almost 2 years now. I'm very impressed by them.
__________________
URR2SLO - If you're not going fast enough, get out the way......
|
|
|
|
|
11-11-2011, 08:21 PM
|
#11 |
Drives: 2010 2ss m6 Join Date: Aug 2011
Location: staten island, ny
Posts: 511
|
mines the same way, it fits weird but is even and the same on each side...I believe screws are the only way to fix it.
__________________
2010 2ss M6, TSP 1 7/8 Long Tube headers,dual electric cutouts, 3" pipes all the way back to magnaflows. elite engineering catch can, custom painted engine cover,CAI cold air intake, apex cold air racescoop, jannety racing 470 hp kit, custom JRE hot rough idle blower cam, jannety racing dyno tuned. pfadt lowering springs, lsr short throw shifter, custom sub setup,sony 7" indash nav, interior stiching dye, 20% tint all around, HAVOC spoiler, tail light black out, chevy emblem black out, seibon BBII carbon fiber hood,Front and rear bowtie blackouts. 461 rwhp and not done yet!
|
|
|
|
|
11-11-2011, 08:23 PM
|
#12 |
|
Drives: 2010 2ss m6 Join Date: Aug 2011
Location: staten island, ny
Posts: 511
|
here is a pic...bad angle though
__________________
2010 2ss M6, TSP 1 7/8 Long Tube headers,dual electric cutouts, 3" pipes all the way back to magnaflows. elite engineering catch can, custom painted engine cover,CAI cold air intake, apex cold air racescoop, jannety racing 470 hp kit, custom JRE hot rough idle blower cam, jannety racing dyno tuned. pfadt lowering springs, lsr short throw shifter, custom sub setup,sony 7" indash nav, interior stiching dye, 20% tint all around, HAVOC spoiler, tail light black out, chevy emblem black out, seibon BBII carbon fiber hood,Front and rear bowtie blackouts. 461 rwhp and not done yet!
|
|
|
|
|
11-11-2011, 09:51 PM
|
#13 |
|
Drives: car Join Date: Feb 2010
Location: USA
Posts: 801
|
Doesn't look like it fits too good to me. Note to self.... Do not buy Havoc spoiler.
__________________
Upgrades to suspension, brakes, motor and appearance. 482.7 RWHP- 434.2 RWT - All motor.
 |
|
|
|
|
11-12-2011, 12:42 PM
|
#14 |
|
Drives: 10 IBM SS RS/14 1500 Z71 Join Date: Jan 2010
Location: Lehigh Valley, PA
Posts: 1,577
|
 
|
|
|
|
|
|
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 2011 Camaro SS/RS MPD1 Spoiler Install | Extinct | Camaro DIY & HOW-TO instructions & discussions | 32 | 08-02-2015 12:06 PM |
| Convertible spoiler installed on coupe :) | vuduman67 | Cosmetics and Lighting Modification Discussions | 68 | 03-27-2013 08:27 AM |
| Trunk lid swap for new spoiler install | Sourmug | USA - Mid-Atlantic | 3 | 05-26-2011 07:59 PM |
| Need pic request please! Inside rear view of Havoc spoiler. | TCAT | Camaro Photos | Spyshots | Video | Media Gallery | 2 | 05-26-2011 03:22 PM |
| Request for spoiler mount pictures | KK2010SS | Camaro Photos | Spyshots | Video | Media Gallery | 2 | 05-27-2009 10:35 AM |
