Enquiry about spoiler! - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

camaroksa · 11-19-2011, 09:45 AM

hey folks

I just want to ask if I have the stock camaro ss spoiler installed and I want to replace it with the high wing spoiler can I do that? or I must buy a new trunk door?

thanks!

Big Top Gt · 11-19-2011, 09:52 AM

Without seeing either spoiler, you'd need to measure the mounting points.

If it's a spoiler specific to your car, both make and model, generally they make them to bolt on directly using the stock mounting holes.

If it's a universal fit spoiler, then you may have to close up the existing holes and drill some new ones, which would require a body shop, generally.

camaroksa · 11-19-2011, 10:06 AM

you can see the high wing spoiler here and its from GM company!http://www.gmaccessorieszone.com/Che...ler%2bKit/2011

and this is the stock spoiler!http://discountcarspoilersdirect.com...maro-10-11.jpg

The Stig · 11-19-2011, 10:25 AM

Yes you can install the high wing spoiler, and no you do not need to buy a new trunk lid.

HopeRidesAlone · 11-19-2011, 10:31 AM

you dont need to buy i trunk lid but their will be holes unless you get a body shop to patch and repaint

11-19-2011, 09:45 AM	#1
camaroksa Drives: camaro 2ss Join Date: May 2011 Location: jeddah Posts: 22	Enquiry about spoiler! hey folks I just want to ask if I have the stock camaro ss spoiler installed and I want to replace it with the high wing spoiler can I do that? or I must buy a new trunk door? thanks!

11-19-2011, 10:25 AM	#4
The Stig knows 2 facts about ducks Drives: ...and they're both wrong Join Date: Aug 2009 Location: The HMS Invincible Posts: 25,072 View My Garage	Yes you can install the high wing spoiler, and no you do not need to buy a new trunk lid. __________________

11-19-2011, 10:31 AM	#5
HopeRidesAlone Drives: 2010 Camaro Black 2SS/RS Join Date: Mar 2010 Location: Maryland Posts: 840 View My Garage	you dont need to buy i trunk lid but their will be holes unless you get a body shop to patch and repaint __________________ 2010 Black 2LT/RS - Injen CAI, ARK DTS Catback Polished Tips, OBX LT Headers, Lowered on Eibach, 3/8 blackiceolator, Trifecta Tuned.- *Totaled 3/10/13* 2010 Black 2SS/RS - Stainless powers 1 7/8 LT headers, cold air inductions cai, Tuned by dynosteve, Feesler side skirt, Feesler Spoiler, Feesler carbon fiber bowties, H&R Lowering Springs.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Comp Series Gen 1 Style Rear Deck Spoiler! GROUP BUY at Unrestricted Motorsports!	AutoAgenda	Exterior Parts & Accessories	61	09-19-2012 09:11 PM
GROUP BUY: Unrestricted Motorsports Comp Dovetail Spoiler \| 2010+ Camaro	AutoAgenda	Exterior Parts & Accessories	11	11-17-2011 12:32 PM
Spoiler Question	Rocky1974	Cosmetics and Lighting Modification Discussions	16	03-25-2011 05:55 PM
Extreme Dimensions / Duraflex "Hot Wheels" Camaro spoiler FOR SALE	nUcLeArEnVoY	Exterior Parts & Accessories	1	04-05-2010 07:31 PM
Spoiler	wlvrine	Cosmetics and Lighting Modification Discussions	21	10-28-2009 10:24 AM

11-19-2011, 09:52 AM	#2
Big Top Gt Account Suspended Drives: IOM 2010 2SS/RS (LS3) Join Date: Oct 2011 Location: South Florida, 33071 Posts: 677	Without seeing either spoiler, you'd need to measure the mounting points. If it's a spoiler specific to your car, both make and model, generally they make them to bolt on directly using the stock mounting holes. If it's a universal fit spoiler, then you may have to close up the existing holes and drill some new ones, which would require a body shop, generally.

11-19-2011, 10:06 AM	#3
camaroksa Drives: camaro 2ss Join Date: May 2011 Location: jeddah Posts: 22	you can see the high wing spoiler here and its from GM company!http://www.gmaccessorieszone.com/Che...ler%2bKit/2011 and this is the stock spoiler!http://discountcarspoilersdirect.com...maro-10-11.jpg