prices for lambo doors

[Blondie3]

Originally Posted by jatt5ab1soorma

I've seen Camaro4mybday (Joe's) Lambo doors, and damn all i can say is you cant go one bit wrong with them, straight up chick magnet with those doors!

Joe did my hinges and they came out great!!!

( I hope it attracts the guys, not the chicks LOL )

[Blondie3]

Originally Posted by LIM3

Hey man just contact lupe
He ha done the installs and will recommend vertical doors Inc

any luck since we last spoke?

[racer778]

I wouldnt get any hinges besides the ones vertical doors manufactures. They use the stock holes, you do not cut the wires and their is only slight modification to the fenders. You can get them on E-bay just make sure they are selling the ones from vertical doors for about 1000

[dorfmac]

I'm no expert, but I've gotten 3 different quotes on lambo doors + install. One was from a Vertical Doors Inc. recommended installer. You're looking at about $3k for the job. Sadly, the cost means I'll have to wait until spring time after I get my tax refund, but the badass look will justify the cost!

[camaro4mybday]

Originally Posted by dorfmac

I'm no expert, but I've gotten 3 different quotes on lambo doors + install. One was from a Vertical Doors Inc. recommended installer. You're looking at about $3k for the job. Sadly, the cost means I'll have to wait until spring time after I get my tax refund, but the badass look will justify the cost!

wow you should plan a trip to nyc. you can bring me the car and get vert doors, stay a couple of nights in nyc and even get dinner for 3k

[racer778]

Originally Posted by dorfmac

I'm no expert, but I've gotten 3 different quotes on lambo doors + install. One was from a Vertical Doors Inc. recommended installer. You're looking at about $3k for the job. Sadly, the cost means I'll have to wait until spring time after I get my tax refund, but the badass look will justify the cost!

Sorry don't spend that kind of money. It is a total of maybe 8 hours taking your time at the most. Any shop can install as you do not drill any extra holes. There are a couple of DIY's on this site to show you how easy it is. You take the front fenders off cut the inner panel of the fender to make room for the shock, tape the doors to the car fill the gap with popsicle sticks (yes popsicle sticks) and remove and replace the hinges.

[camaro4mybday]

Originally Posted by racer778

Sorry don't spend that kind of money. It is a total of maybe 8 hours taking your time at the most. Any shop can install as you do not drill any extra holes. There are a couple of DIY's on this site to show you how easy it is. You take the front fenders off cut the inner panel of the fender to make room for the shock, tape the doors to the car fill the gap with popsicle sticks (yes popsicle sticks) and remove and replace the hinges.

its a little more involved than that but thats what the instructions say

[dorfmac]

Originally Posted by camaro4mybday

wow you should plan a trip to nyc. you can bring me the car and get vert doors, stay a couple of nights in nyc and even get dinner for 3k

Then I'll be seeing you this spring. I love being told I'm wrong in these instances!

[racer778]

Originally Posted by camaro4mybday

its a little more involved than that but thats what the instructions say

My intention was not to give the detailed how-to, since there are DIY's that detail the install much better than I can. Spending 3k on this install I feel is way out of line. Hinges 1000 to 1200. 2000 for less than I full day of work would be paying a shop over 200 dollars an hour. It's not that difficult. When I had my car at vertical doors in california, it took them 2.5 hours and I watched the install. No, I didnt install it myself but I feel confident I could after observing what they did. Installing my maggie was more involved than this project and it took me 7.5 hours to do it.

Just noticed you were a shop, customer can feel confident if their is adjustment in the future or any issues they can bring the car back to you, that may warrant the added cost of installation. good luck with the doors.

[JohnnyComeLately]

Originally Posted by racer778

My intention was not to give the detailed how-to, since there are DIY's that detail the install much better than I can. Spending 3k on this install I feel is way out of line. Hinges 1000 to 1200. 2000 for less than I full day of work would be paying a shop over 200 dollars an hour. It's not that difficult. When I had my car at vertical doors in california, it took them 2.5 hours and I watched the install. No, I didnt install it myself but I feel confident I could after observing what they did. Installing my maggie was more involved than this project and it took me 7.5 hours to do it.

Just noticed you were a shop, customer can feel confident if their is adjustment in the future or any issues they can bring the car back to you, that may warrant the added cost of installation. good luck with the doors.

Can you shoot me a PM, or reply with the contact info for who you had do it in Cali?

[LIM3]

Originally Posted by jatt5ab1soorma

I've seen Camaro4mybday (Joe's) Lambo doors, and damn all i can say is you cant go one bit wrong with them, straight up chick magnet with those doors!

I second that , they are awesome at shows
And constant flow of girls

[Camaro_Corvette]

I can't express how happy I am to see that the haters have finally learned to stay out of these threads. 2 years ago when a thread like this would open up, it would be hate city in here. This is great

[Hennesseyrgv]

I guess anyone could give it a shoot and installed them, them selves. But one advise (just make sure your front fenders align with your doors!!!). If not you could have a noisy ride. Air could be hitting on the edges of the door.

Check out my doors, also theres((( some ))))out there for 700 bucks and it's just the same ones that the big name brand companies sell. You just have to know where they get there stuff from, and thats with a $300 dollars profit from the manufacture.


http://www.camaro5.com/forums/showth...Hpe+650+teaser

[Hennesseyrgv]

Recommend this guy
http://www.camaro5.com/forums/member.php?u=26112
Overhaulengines