Lingenfelter Performance Engineering Customers

[se7en]

Originally Posted by Blue70SS

on the way...

Just doing my job keepin the UPS guy busy

From the looks of your sig our builds are very similar. Very close to identical.
How much boost is it getting?

The DA there in Denver has got to be a killer on ETs during the drag season.

[Ryan@Lingenfelter]

Hey guys and gals,
We are currently running a special on our gift certificates. Here is the info:

"Lingenfelter is offering two gift card specials. Buy a $100.00 gift card & get $10.00 off or a free Lingenfelter Camaro T Shirt. Buy a $500.00 gift card & get $50.00 off or a free Lingenfelter embroidered logo Mothers vehicle detail bag packed full of all the popular Mothers car care products over $100.00 value."

Click here
I hope you all have a Happy Holiday season!

Ryan

[Blue70SS]

Originally Posted by se7en

From the looks of your sig our builds are very similar. Very close to identical.
How much boost is it getting?

The DA there in Denver has got to be a killer on ETs during the drag season.

Yep, DA sucks :(

Dyno sheet showed max boost at 13.82, but on short 3k-5k blasts on the road I see 12.8 max on my ADM gauge. Between weather and running my stock Pirelli's I haven't been able to get a full WOT run. Definitely need the 315 NT05's for that and open road.

I just checked a video I took of the ADM gauge while on the dyno before pully and LPE GT9 cam change - dyno showed 12.4 and video gauge showed 11.9

So based on that, I'm probably at 13.3 without short dyno spikes. Which is roughly 15.8 at sea level if 1 psi for every 2k feet I think.

[Blue70SS]

Originally Posted by Ryan@Lingenfelter

Hey guys and gals,
We are currently running a special on our gift certificates. Here is the info:

"Lingenfelter is offering two gift card specials. Buy a $100.00 gift card & get $10.00 off or a free Lingenfelter Camaro T Shirt. Buy a $500.00 gift card & get $50.00 off or a free Lingenfelter embroidered logo Mothers vehicle detail bag packed full of all the popular Mothers car care products over $100.00 value."

Click here
I hope you all have a Happy Holiday season!

Ryan

60 day price guarantee? :emoticon7:

Time for somebody to buy 10-$500 GC's = $500 off 9.5" diff..... now that's a deal!

Even better, I should buy some and save them for future stroker upgrades
HAPPY HOLIDAYS RYAN

[Speed74SS]

Originally Posted by JusticePete

What I want is a couple of cases here at the office and all my LPE and C5 friends to come by for a Christmas party How cool would that be?

What I want from Pete for Christmas would be sway bars & lowering springs for the CTS-V......

I see Paul is going with a ZL1 addition----sweet!!

Blue & Se7en - Nice additions to your cars!!

600 - great racing season!!

Strat - Nice work on the hood!!


I also want to thank Ryan again - I'm looking forward to my car visiting Graham in March!! She put down 540 with headers & CAI - we will see what we can get out of her with a 9.17 lower, 2.55 upper & ID850 Injectors.

[JusticePete]

Originally Posted by Speed74SS

What I want from Pete for Christmas would be sway bars & lowering springs for the CTS-V......

CTS-V bars are a nightmare to bend and it looks as though Supercars would fit, the factory diff and sub-frame bushes are...

[Speed74SS]

Originally Posted by JusticePete

CTS-V bars are a nightmare to bend and it looks as though Supercars would fit, the factory diff and sub-frame bushes are...

Yep they look like it - the install wouldn't be that fun either!! I see eibach has some lowering springs but I prefer Pedders!

[JusticePete]

Originally Posted by Speed74SS

Yep they look like it - the install wouldn't be that fun either!! I see eibach has some lowering springs but I prefer Pedders!

Sway bar install on the V is a real bear.. With MRC restricts the amount of drop to 20mm by our evaluation. I think the Eibach kit drops it 2 or 3mm further. A good daily driver alignment would look like this.

Front:
Camber -1.5
Caster 6.5
Toe ZERO

REAR
OE Camber -1
OE Total Toe -.15
PK Camber -1

What are you running?

[Speed74SS]

Originally Posted by JusticePete

Sway bar install on the V is a real bear.. With MRC restricts the amount of drop to 20mm by our evaluation. I think the Eibach kit drops it 2 or 3mm further. A good daily driver alignment would look like this.

Front:
Camber -1.5
Caster 6.5
Toe ZERO

REAR
OE Camber -1
OE Total Toe -.15
PK Camber -1

What are you running?

I haven't changed anything with the suspension or alignment yet. I just bought some RE-11's, so I will have it aligned to these specs when installed. Thx Pete!!

I think people are buying the eibach drop springs for the coupe and running them on the sedan and they seem to work. I haven't dug into it too much though. I leave that to people who know a little more than I do.

[JusticePete]

Originally Posted by Speed74SS

I haven't changed anything with the suspension or alignment yet. I just bought some RE-11's, so I will have it aligned to these specs when installed. Thx Pete!!

I think people are buying the eibach drop springs for the coupe and running them on the sedan and they seem to work. I haven't dug into it too much though. I leave that to people who know a little more than I do.

You're welcome.

[Blue70SS]

Originally Posted by JusticePete

You're welcome.

There you go Nate..... Pete just provided a free shovel

You should show up to Cfest with the CTS-V. Maybe Pete and LPE could set it up "Dan" style

[Blue70SS]

"May the Mods be with you"

[2010 BADSS]

Hello and Merry Christmas everyone!!!!

We are glad to see everyon has been very busy modding their cars while we have been very busy finishing our garage with attached shack.

Blue your car is amazing, nice dyno!!!

MWS your shop is to die for!!!

Dan, great season, and we're looking forward to seeing you transform your beast to the L28 version!!

Se7en nice job with your car, hope we can see it at C5fest3!

Speed, we love the V, and can't wait to see what you do with it.

Hoverman and Black Friday, hope you guys are enjoying some nicer weather and getting to enjoy your beasts!!!!!

Pete, glad to see you busy making everyone's cars better!! Merry Christmas to you and your family!

Welcome to all the new LPE brothers. We have a friend who just sent his Corvette Grand sport up there!

We finally finished our home and are busy shovelling all the snow we got hit with this past week. We are having the family over for Christmas, so it's been a mad dash to get everything put away, decorated, and ready to cook, so no time for the cars, but I'm sure the new year will bring us more time to join in the modding! Here are some pics!

[Blue70SS]

Originally Posted by 2010 BADSS

Hello and Merry Christmas everyone!!!!

We are glad to see everyon has been very busy modding their cars while we have been very busy finishing our garage with attached shack.

Blue your car is amazing, nice dyno!!!

MWS your shop is to die for!!!

Dan, great season, and we're looking forward to seeing you transform your beast to the L28 version!!

Se7en nice job with your car, hope we can see it at C5fest3!

Speed, we love the V, and can't wait to see what you do with it.

Hoverman and Black Friday, hope you guys are enjoying some nicer weather and getting to enjoy your beasts!!!!!

Pete, glad to see you busy making everyone's cars better!! Merry Christmas to you and your family!

Welcome to all the new LPE brothers. We have a friend who just sent his Corvette Grand sport up there!

We finally finished our home and are busy shovelling all the snow we got hit with this past week. We are having the family over for Christmas, so it's been a mad dash to get everything put away, decorated, and ready to cook, so no time for the cars, but I'm sure the new year will bring us more time to join in the modding! Here are some pics!


Attachment 318459

Attachment 318460

Attachment 318461

Attachment 318462

Attachment 318463

Attachment 318464

Attachment 318465

Attachment 318466

Nice Diana! Love that garage .... we could use it for LPE reunions and park ALL the cars in there! When are you building the Drag Strip?