OHIO CAMARO ENTHUSIASTS/OWNERS REPORT HERE - Page 587 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

gahammerle · 12-29-2011, 01:54 PM

They just gave him a birthday spanking - that's all it was.

Synner · 12-29-2011, 02:03 PM

Anyone know a shop in the dayton/cinci/columbus area to get the radius rod bushing pressed out and new one pressed in? Its a weird mm size so I can't imagine most places would have the right press size. Got a full pedders replacement showing up this weekend. Would cincy speed have it?

I'd rather do that than cut it out but I can cut as a last resort.

Darth_Emma · 12-29-2011, 02:17 PM

Quote:

Originally Posted by Synner

Anyone know a shop in the dayton/cinci/columbus area to get the radius rod bushing pressed out and new one pressed in? Its a weird mm size so I can't imagine most places would have the right press size. Got a full pedders replacement showing up this weekend. Would cincy speed have it?

I'd rather do that than cut it out but I can cut as a last resort.

IPS Motorsports can probably do it. They are just north of Columbus.

IPSMotorsports.net

Give them a call and ask.

Synner · 12-29-2011, 02:26 PM

If there's nothing closer I'll call there. There's really no pedders dealers in my area. There's one in cincy but their website scares me. Its all cars on hydraulics and 24's.

Darth_Emma · 12-29-2011, 02:27 PM

Quote:

Originally Posted by Synner

If there's nothing closer I'll call there. There's really no pedders dealers in my area. There's one in cincy but their website scares me. Its all cars on hydraulics and 24's.

I'm sure Cincy Speed could do it too.

I just live much closer to IPS and they do all my work (my car is there right now).

gahammerle · 12-29-2011, 02:55 PM

Quote:

Originally Posted by Synner

If there's nothing closer I'll call there. There's really no pedders dealers in my area. There's one in cincy but their website scares me. Its all cars on hydraulics and 24's.

Yeah, I've seen that site too. It is very scary.

Synner · 12-29-2011, 03:46 PM

Glad I'm not the only one.

Drew10 · 12-30-2011, 11:22 AM

You guys must be talking about Spade Kreation. They did Bangals, Frostee Ruckers car that was stolen at SEMA this year. They seem to like the "urban" style more for the cars they build.

velociSSimo · 12-30-2011, 07:19 PM

Anyone on Facebook who'd like to help me out! Final 4 for Apex's Car of the month on Facebook. Thanks! https://www.facebook.com/ApexMotorsportsIncorporated

Whitehambone · 12-30-2011, 08:04 PM

Quote:

Originally Posted by velociSSimo

Anyone on Facebook who'd like to help me out! Final 4 for Apex's Car of the month on Facebook. Thanks! https://www.facebook.com/ApexMotorsportsIncorporated

I went to vote for you but it was unclear to me who to vote for, they are listed by name. I am to new to the Ohio Enthusiasts/Owners section to know you name.

Mike

velociSSimo · 12-30-2011, 08:06 PM

Quote:

Originally Posted by Whitehambone

I went to vote for you but it was unclear to me who to vote for, they are listed by name. I am to new to the Ohio Enthusiasts/Owners section to know you name.

Mike

Thanks!... Jim Matasic

rachykells · 12-30-2011, 10:42 PM

Quote:

Originally Posted by Drew10

You guys must be talking about Spade Kreation. They did Bangals, Frostee Ruckers car that was stolen at SEMA this year. They seem to like the "urban" style more for the cars they build.

Yeah, they definitely do a lot of.... different... builds. They did have a sick Camaro Gen5 Camaro at Calvalcade last year though. I've had windows tinted on 2 of my cars there, though. A bunch of good guys from my experiences.

ChriSS84 · 01-01-2012, 03:00 AM

Good shop, but they are expensive. I also found out that they don't do most of the work. They send the cars out to get done then charge double claiming they do the work... Anything they can do you can get done somewhere else cheaper.. The owner is a super douche! And their purple camaro is lame! I've seen it many times... system in it is redic...

SteveRS · 01-01-2012, 08:32 AM

Greetings Ohio friends!!

12-29-2011, 01:54 PM	#8205
gahammerle Drives: 2010 Camaro LS M6 Inferno Orange Join Date: May 2010 Location: Lebanon, OH Posts: 1,673	They just gave him a birthday spanking - that's all it was. __________________ Gordy Injen CAI / Solo Mach-X LLT / Solo High-flow res-cats / Barton short shifter / RX Catch Can / RPI Gills / 35% tint / LED Footwell Lighting Front & Rear / Pedders Street 1 / Pedders steering rack bushing / SS struts / Pfadt drop springs / VMax Ported Throttle Body / Spohn Toe Rods / Spohn Trailing Arms / Trifecta Tune / MACE 25mm Intake Spacers Find me on Facebook: http://www.facebook.com/gahammerle

12-30-2011, 07:19 PM	#8213
velociSSimo ... well, not yet. Drives: 2012 Chevy Silverado ZL1 Join Date: Apr 2011 Location: NE Ohio Posts: 1,213	Anyone on Facebook who'd like to help me out! Final 4 for Apex's Car of the month on Facebook. Thanks! https://www.facebook.com/ApexMotorsportsIncorporated __________________ 1988 Wellcraft St. Tropez / 32' Length / Twin 454ci

01-01-2012, 08:32 AM	#8218
SteveRS Drives: 2010 SIM Cobalt SS Join Date: Dec 2010 Location: Lorain, Ohio Posts: 6,331	Greetings Ohio friends!! __________________ 2011 Imperial Blue 1.5SS 2010 Silver Ice Cobalt SS

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Songs About Camaros (for your driving pleasure)	Emjay	5th Gen Camaro SS LS LT General Discussions	74	12-18-2014 01:42 AM
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 08:33 PM
CNN: Camaro: From sketchpad to street - The rebirth of a muscle car ...	Gatecrasher	5th Gen Camaro SS LS LT General Discussions	49	10-05-2009 04:33 PM
UPCOMING CAMARO IMPORTANT DATES	CamaroScotty	5th Gen Camaro SS LS LT General Discussions	125	01-11-2009 01:31 AM
Camaro Accessories from SEMA	FenwickHockey65	5th Gen Camaro SS LS LT General Discussions	1	11-03-2008 03:25 PM

12-29-2011, 02:03 PM	#8206
Synner Drives: cars Join Date: May 2011 Location: Oversneeze Posts: 4,542	Anyone know a shop in the dayton/cinci/columbus area to get the radius rod bushing pressed out and new one pressed in? Its a weird mm size so I can't imagine most places would have the right press size. Got a full pedders replacement showing up this weekend. Would cincy speed have it? I'd rather do that than cut it out but I can cut as a last resort.

12-29-2011, 02:26 PM	#8208
Synner Drives: cars Join Date: May 2011 Location: Oversneeze Posts: 4,542	If there's nothing closer I'll call there. There's really no pedders dealers in my area. There's one in cincy but their website scares me. Its all cars on hydraulics and 24's.

12-29-2011, 03:46 PM	#8211
Synner Drives: cars Join Date: May 2011 Location: Oversneeze Posts: 4,542	Glad I'm not the only one.

12-30-2011, 11:22 AM	#8212
Drew10 Enjoys a good train wreck Drives: 2010 IBM Camaro 2SS/RS Join Date: Nov 2009 Location: Cincinnati, OH Posts: 1,800	You guys must be talking about Spade Kreation. They did Bangals, Frostee Ruckers car that was stolen at SEMA this year. They seem to like the "urban" style more for the cars they build.

01-01-2012, 03:00 AM	#8217
ChriSS84 Account Suspended Drives: 2SS Join Date: Oct 2009 Location: Cincinnati,Ohio Posts: 850	Good shop, but they are expensive. I also found out that they don't do most of the work. They send the cars out to get done then charge double claiming they do the work... Anything they can do you can get done somewhere else cheaper.. The owner is a super douche! And their purple camaro is lame! I've seen it many times... system in it is redic...