whats the best Blackout kit?

[Chills]

Still wondering about what level tint to get though :p

[HeadlightArmor]

We have a bunch of photos of each of our three levels on the site and in the vendor thread here - on both base and RS trims. It is all about what you want the lights to look like

[Chills]

Originally Posted by HeadlightArmor

We have a bunch of photos of each of our three levels on the site and in the vendor thread here - on both base and RS trims. It is all about what you want the lights to look like

How well showed the light show the during the day for the %20?

[bigwormgraphix]

Our most popular colors are Charcoal and Gun Smoke. The Charcoal (30%) material gives a black appearance and the original color of the lens isn't visible. Our Gun Smoke (12%) material is more transparent and allows the original color of the lens to still be visible thru the material. The smoke (17%) material more of a brownish color instead of black. The tint (6%) material isn't real visible, looks like the RS tail lights. All of them allow the lights to be visible like normal when you are on the brakes or have your lights on at night.

We have a bunch of photos of the different colors on our web site, the link below goes to that part of the site.
http://www.bigwormgraphix.net/2010ca...okedLights.htm

[HeadlightArmor]

Originally Posted by Chills

How well showed the light show the during the day for the %20?

Not a Camaro, but you get the idea, Dark Stealth Smoke 20% with brake lights, hazzards, and reverse lights lit on a bright sunny Texas summer afternoon.

[bigwormgraphix]

Charcoal tail lights


Gun Smoke tail lights

[woodstock]

Make sure there is no ordinance against them in your state,they bring big fines in some.

[Chills]

What are the laws for Missouri?

And any pics on an ibm?

[66olds442]

I have Bigworms stuff all over my car except on the foglamps and headlights. They look beautiful and were easy to install. Mine are Charcoal

[bigwormgraphix]

Originally Posted by Chills

What are the laws for Missouri?

And any pics on an ibm?

Don't have any pics of an ibm Camaro with tint. Laws vary in different states and different areas of states so it is best to check with your local Police department.

[ubrimah]

Originally Posted by Chills

What % did you getand do you have any pics?

I got the smoke(I think.The darkest tint anyway) tint on my headlights. There are pics in my build thread.

[ubrimah]

Originally Posted by Chills

What % did you getand do you have any pics?

Here's a pic. It's kinda small though…




Sent from my iPad using Tapatalk HD

[jwithers2005]

I bought the BigWorm kit as well...I went with gunsmoke (12% I think). they aren't completely blacked out but they are pretty dark. fog lights are the most trouble to apply without leaving wrinkles IMO. a heat gun to soften them up SLIGHTLY (hair dryer too) will help to fit them around the curvature properly..everything else is a breeze. it took me about an hour & a half to do the kit without the headlights (reeeaally taking my time). very nice heavy material also. I can definitely notice dimming of my fog lights, but not enough to hurt..hope this helps

[jwithers2005]

Originally Posted by Chills

Did you get the charcoal, smoke or what and how does it fit? Does it go under the bezel or can you still see red around the edge?

mine were plenty big enough to tuck behind the bezels with the squeegee they give you..may need to pry the bezel out slightly in some spots with something that wont scratch the lens or bezels..i used a regular flathead screw driver with no troubleto make a gap big enough.the grill will pull out far enough to tuck the blinker films the same wayi...highly recommend the kit..