Adding a ZL1 front end to your car. - Page 75 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

MValdez17 · 01-14-2012, 02:01 AM

Quote:

Originally Posted by jsharp

Wat about just regular insert non carbon fiber?

Quote:

Originally Posted by jsharp

I was thinking doing flat black

The regular insert is the $1500 insert. It is already in Flat Black I believe.

The other carbon fiber insert is the carbon fiber weave look for $2200.

jsharp · 01-14-2012, 08:03 AM

Wow now thats pretty stupid haha dont see why they could not just make it steel or fiberglass at that rate but it is a 50k car for a reason!

chevy 3 · 01-14-2012, 09:54 AM

I really wanted that hood but it looks to be way out of my range $$$ wise. Looks like after Markit to me

kbui · 01-14-2012, 10:06 AM

Quote:

Originally Posted by Darth_Emma

Ofer,
You need a to make a kit with just the ports with the bezels with the dual lights for us SS folks, then I wouldn't have to worry about repainting (and body work) and replacing the clear bra etc. on my SS facia. Pleeeeeeeeeeeease.

Quote:

Originally Posted by sene

I think you're onto something Emma, plus I've got m old bumper to protype off of. I'll keep you updated.

Quote:

Originally Posted by 11 Camaro IBM

SO close........

Where are you getting these parts around Austin?

jsharp · 01-14-2012, 11:03 AM

surely someone can come up with atleast a fiberglass version of the insert to put in the factory hood *** HINT HINT**** That way you get the look of the hood and the metal version but you dont have the overpriced insert!

Overflow · 01-14-2012, 11:32 AM

This thread is awesome.

Subscribed.

sene · 01-14-2012, 12:10 PM

I think sun coast customs had a zl1 replica hood for 1000 but I bet it doesn't match up with yhe cowl lines of the gm zl1 bumper

Quote:

Originally Posted by jsharp

surely someone can come up with atleast a fiberglass version of the insert to put in the factory hood *** HINT HINT**** That way you get the look of the hood and the metal version but you dont have the overpriced insert!

jsharp · 01-14-2012, 12:54 PM

Well now that the bumper is out someone needs to get on it!

11 Camaro IBM · 01-14-2012, 01:16 PM

Quote:

Originally Posted by kbui

Where are you getting these parts around Austin?

Chuck Nash in Kyle tx

Hutch52 · 01-14-2012, 02:32 PM

Quote:

Originally Posted by Darth_Emma

Ofer,
You need a to make a kit with just the ports with the bezels with the dual lights for us SS folks, then I wouldn't have to worry about repainting (and body work) and replacing the clear bra etc. on my SS facia. Pleeeeeeeeeeeease.

I would like a pair of those myself.

chevy 3 · 01-14-2012, 03:29 PM

I got my car out today to get some cigars . Took a pic Name: iphone pics 457.jpg
Views: 855
Size: 169.8 KB

Name: iphone pics 454.jpg
Views: 869
Size: 109.5 KB

Ray@RDS · 01-14-2012, 03:48 PM

Quote:

Originally Posted by DNA

Have you already confirmed that the louver protrusion on the bottom side of the hood does not interfere with any existing parts? If so, would that also be the case with a TVS 2300?

I should have that info this week, Have the hood and (B92)insert in route, already have a tvs2300

Ray@RDS · 01-14-2012, 04:15 PM

Quote:

Originally Posted by DNA

Great, I'll be watching for your post. A couple questions please:

What did you have to pay for hood/insert/misc stuff?

Did you compile a list of parts ordered? If so could you post or PM them?

Thanks

Its a work in progress, I will try to get some info to you later. Kinda been doing it on the fly.
Ofer has provided great info in the first post.

Ray

bthibodeaux · 01-14-2012, 04:22 PM

[QUOTE=chevy 3;4319589]I got my car out today to get some cigars . Took a pic

Looks great. Good job on on it!

I don't know what sux more, being up there freezing your balls off, or down here in Southern Mexico where it is raining so much that the water is threatening to come into the house!

01-14-2012, 08:03 AM	#1038
jsharp NOW CAMMED & SUPERCHARGED Drives: 2010 Camaro 2SS/RS Black w/ IOM Join Date: Oct 2008 Location: Ar Posts: 2,336	Wow now thats pretty stupid haha dont see why they could not just make it steel or fiberglass at that rate but it is a 50k car for a reason! __________________ Livernois Motorsports: Maggie 2300 7psi, Livernois 2C cam/L99 to LS3 Conversion, Ported TB, Rotofab w/adm race scoop, adm trans cooler,Kooks headers no cats, Kooks 3" exhaust. METCO breather. Precision 2400 Vigilante TC. Eibach Lowering Springs & Swaybars. BMR Trailing arms, BMR Rear Cradle Bushings, BMR Toe Rods, BMR Differential bushings. Vossen CV3 20's w/ 305 Mickey Thompson @25psi. Zl1 front bumper. OE Zl1 Hood and matte black insert. 556RWHP/500RWTQ L99 Last edited by jsharp; 01-14-2012 at 08:16 AM.

01-14-2012, 11:03 AM	#1041
jsharp NOW CAMMED & SUPERCHARGED Drives: 2010 Camaro 2SS/RS Black w/ IOM Join Date: Oct 2008 Location: Ar Posts: 2,336	surely someone can come up with atleast a fiberglass version of the insert to put in the factory hood * HINT HINT** That way you get the look of the hood and the metal version but you dont have the overpriced insert! __________________ Livernois Motorsports: Maggie 2300 7psi, Livernois 2C cam/L99 to LS3 Conversion, Ported TB, Rotofab w/adm race scoop, adm trans cooler,Kooks headers no cats, Kooks 3" exhaust. METCO breather. Precision 2400 Vigilante TC. Eibach Lowering Springs & Swaybars. BMR Trailing arms, BMR Rear Cradle Bushings, BMR Toe Rods, BMR Differential bushings. Vossen CV3 20's w/ 305 Mickey Thompson @25psi. Zl1 front bumper. OE Zl1 Hood and matte black insert. 556RWHP/500RWTQ L99

01-14-2012, 12:54 PM	#1044
jsharp NOW CAMMED & SUPERCHARGED Drives: 2010 Camaro 2SS/RS Black w/ IOM Join Date: Oct 2008 Location: Ar Posts: 2,336	Well now that the bumper is out someone needs to get on it! __________________ Livernois Motorsports: Maggie 2300 7psi, Livernois 2C cam/L99 to LS3 Conversion, Ported TB, Rotofab w/adm race scoop, adm trans cooler,Kooks headers no cats, Kooks 3" exhaust. METCO breather. Precision 2400 Vigilante TC. Eibach Lowering Springs & Swaybars. BMR Trailing arms, BMR Rear Cradle Bushings, BMR Toe Rods, BMR Differential bushings. Vossen CV3 20's w/ 305 Mickey Thompson @25psi. Zl1 front bumper. OE Zl1 Hood and matte black insert. 556RWHP/500RWTQ L99

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CAMARO WIKI	Tran	Wiki	67	11-27-2024 09:02 AM
Gran Turismo 5 November 24th, 2010	Nezacant	Gaming Lounge	562	04-21-2011 10:23 PM
Winner, winner - Jalopnik compares the Big 3	Number 3	5th Gen Camaro SS LS LT General Discussions	31	04-17-2011 04:24 PM
Pedders Suspension Benchmark Track Testing and New Jersey Track Day	Info@PeddersUSA.com	USA - NY / NJ / PA	35	10-26-2009 06:20 PM
#4768 - Delivered and Made Ready the Right Way!	Number_9	5th Gen Camaro SS LS LT General Discussions	62	07-16-2009 03:42 AM

01-14-2012, 09:54 AM	#1039
chevy 3 NEcamaro5 Drives: Black 2ss rs 1LE Join Date: Apr 2009 Location: mass Posts: 4,329 View My Garage	I really wanted that hood but it looks to be way out of my range $$$ wise. Looks like after Markit to me

01-14-2012, 11:32 AM	#1042
Overflow Space Shuttle Aficionado Drives: 2016 Camaro 2SS Join Date: Jun 2010 Location: Tampa, FL Posts: 30,897 View My Garage	This thread is awesome. Subscribed.

01-14-2012, 03:29 PM	#1047
chevy 3 NEcamaro5 Drives: Black 2ss rs 1LE Join Date: Apr 2009 Location: mass Posts: 4,329 View My Garage	I got my car out today to get some cigars . Took a pic

01-14-2012, 04:22 PM	#1050
bthibodeaux Drives: Black 2011 2SS/RS M6 Vert Join Date: Apr 2011 Location: Houston, TX Posts: 252	[QUOTE=chevy 3;4319589]I got my car out today to get some cigars . Took a pic Looks great. Good job on on it! I don't know what sux more, being up there freezing your balls off, or down here in Southern Mexico where it is raining so much that the water is threatening to come into the house!