Jacksonville Camaro Club

[jhart711]

News love News Call me any time

[The_Bosnian_Synergy]

Originally Posted by GTAHVIT

Sorry I didn't get around to meet you and some of the other guys. I got stuck talking shop with the CTSV owners that I parked next to.

Hopefully we'll I'll make it out to more shows now that I'n not as jammed up on the weekends.



that is easily one of the baddest Camaros I've seen

Thank you very much .
I try my best hehe.
Also I have to admit I do love yours, especially the heritage grill.

[The_Bosnian_Synergy]

Originally Posted by Codeman1407

Dont worry man, we'll hold it down for the v6's at the next one!

Awesome show the v8's what v6's are made of haha

[Devilfish]

For any of you 2010-2011 V-8 guys that are looking to relocate your heater hoses, the factory 2012 hoses are availible at dealers. They are a hard line unit and relocate to the side of the firewall just like the aftermarket units for only $90-100. I just went this route and they were super easy to install. Next up, clean up those pesky fuel lines to get them out of the way. Also going to repaint the coil covers( they came out a litlle bright, I was painting them at night so I couldnt really tell.)

[Jay-SS]

Thanks Syn and I will see you at the next meet....Looking forward to meeting you all........

[dcarlos55]

I took my car down to EFI Alchemy today to get my tune starightened out.

With the stock tune - 390 HP 399 Torque
Mail order tune - 398 HP 399 Torgue
Doc's tune - 403 HP 401 Torque.

Not bad for basic bolt ons.

He got the torque curve straightened out so it pulls much smoother and it doesn't lean out like it was. I'll have to see if it really helps at the racetrack.

btw, I have an SCT tuner for sale if anyone is interested.

[The_Bosnian_Synergy]

Originally Posted by Jay-SS

Thanks Syn and I will see you at the next meet....Looking forward to meeting you all........

Not a problem, I just got word today that my interior has been shipped so should arrive in this week can't wait .

[GTAHVIT]

Originally Posted by dcarlos55

I took my car down to EFI Alchemy today to get my tune starightened out.

With the stock tune - 390 HP 399 Torque
Mail order tune - 398 HP 399 Torgue
Doc's tune - 403 HP 401 Torque.

Not bad for basic bolt ons.

He got the torque curve straightened out so it pulls much smoother and it doesn't lean out like it was. I'll have to see if it really helps at the racetrack.

btw, I have an SCT tuner for sale if anyone is interested.

You should keep that SCT. Doc can put a couple different tunes on there for you so you can swap em out when you want.

[Codeman1407]

So.... Boss got the word that we're directed to work this coming weekend..

Then my boss told me i get to go home cause he's gonna send another crew for the weekend..

YES!!

Anyone want to go eat at Logan's Roadhouse after the meet saturday? i know the GM and if there's a lot of people, i'll need to let him know ahead of time.

[steeleshark2]

Originally Posted by dcarlos55

I took my car down to EFI Alchemy today to get my tune starightened out.

With the stock tune - 390 HP 399 Torque
Mail order tune - 398 HP 399 Torgue
Doc's tune - 403 HP 401 Torque.

Not bad for basic bolt ons.

He got the torque curve straightened out so it pulls much smoother and it doesn't lean out like it was. I'll have to see if it really helps at the racetrack.

btw, I have an SCT tuner for sale if anyone is interested.

That still seams a little low with headers (if you have them). What headers and cai do you have?

[dcarlos55]

Originally Posted by steeleshark2

That still seams a little low with headers (if you have them). What headers and cai do you have?

I have the ARH 1 7/8 with high flow cats and the CAI Inc cai.

The cats probably cost me a couple ponies. Getting rid of the washer bottle to improve airflow into the cai would probably help a bit too.

I'm going to the dealer tomorrow to order the new heater hose setup. Getting the heater hoses off the intake should help a little too.

[Jay-SS]

Is there a meet this weekend and if so....when and where?

[Codeman1407]

Originally Posted by Jay-SS

Is there a meet this weekend and if so....when and where?

Yessir!

RiverCity Market Place, Saturday, i think 5pm-8pm?

park between the lowes and walmart parking lots. you'll see it when you get there. Always a good turnout!

[Jay-SS]

im there!!