Adding a ZL1 front end to your car.

[bthibodeaux]

Originally Posted by Caliman93230

looked around found a good price

DRL retainers? 20957334? If so, where? I still need these. Thanks.

[orangejuice]

Originally Posted by bthibodeaux

DRL retainers? 20957334? If so, where? I still need these. Thanks.

ditto

[Caliman93230]

Originally Posted by bthibodeaux

DRL retainers? 20957334? If so, where? I still need these. Thanks.

Try pace performance good price

[2SSRS@Gen5diy]

Originally Posted by Darth_Emma

I bet AAC will come out with an LED for that bulb eventually.

I did see pic ^

Originally Posted by Caliman93230

Try pace performance good price

if they have them in stock, i dont think so.

[paulsandhu]

I wonder if anyone will be doing this in the Vancouver region. I'm not so confident about putting it together myself.

[2SSRS@Gen5diy]

Here is how to fix your Harness so you can run your DRL bulbs you have.

[orangejuice]

What do you mean run the drl's? Doesn't your harness fix the drls just not the fog lights?

[bthibodeaux]

Originally Posted by 2SSRS

Here is how to fix your Harness so you can run your DRL bulbs you have.

Excellent! Much better than having to cut and solder. Thanks again Ofer!!

[orangejuice]

Or do you mean the actual bulb in the zl1 harness? Lol

[MValdez17]

Originally Posted by orangejuice

Or do you mean the actual bulb in the zl1 harness? Lol

The DRL bulbs are different on the ZL1 then the SS or V6. The wiring harness on the right(ZL1 Harness) that he modified is to work with your SS/V6 DRL bulbs.
If you want to save money or have aftermarket bulbs(AAC) that you want to use, then you will have to cut the tab off as 2SSRS did. Unless you want to buy the new bulbs.

[iFast]

Originally Posted by orangejuice

Got my fog lights from eBay! Now I just need my parts from GM, which they should be here any day because I ordered everything on Saturday! Getting pumped

I got the same ones delivered today. How do these fit into the fascia? I've tried just about every way possible but they don't seem to fit. Am I missing something here???

[2SSRS@Gen5diy]

Originally Posted by orangejuice

Or do you mean the actual bulb in the zl1 harness? Lol

This is so you can reuse the bulbs you have in your DRLs.

Originally Posted by orangejuice

What do you mean run the drl's? Doesn't your harness fix the drls just not the fog lights?

Yes it does fix you running the fog lights.

Originally Posted by bthibodeaux

Excellent! Much better than having to cut and solder. Thanks again Ofer!!

Thank you.

Originally Posted by MValdez17

The DRL bulbs are different on the ZL1 then the SS or V6. The wiring harness on the right(ZL1 Harness) that he modified is to work with your SS/V6 DRL bulbs.
If you want to save money or have aftermarket bulbs(AAC) that you want to use, then you will have to cut the tab off as 2SSRS did. Unless you want to buy the new bulbs.

+100

Originally Posted by iFast

I got the same ones delivered today. How do these fit into the fascia? I've tried just about every way possible but they don't seem to fit. Am I missing something here???

If it the ones i posted on the OP, then go in from the rear, But dont install till your bumper is painted there hard to remove.

[iFast]

Originally Posted by 2SSRS

This is so you can reuse the bulbs you have in your DRLs.



Yes it does fix you running the fog lights.



Thank you.



+100




If it the ones i posted on the OP, then go in from the rear, But dont install till your bumper is painted there hard to remove.

I might need a tutorial on this then bc from the front or the rear it doesn't look like it belongs in there. The only thing that lines up is the lens does sit flush into the bezel. It looks like it is the wrong retainer or something.

[2SSRS@Gen5diy]

Here is a pick.