Adding a ZL1 front end to your car. - Page 99 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

RJTV6A · 01-28-2012, 08:40 AM

Quote:

Originally Posted by bthibodeaux

Beauty! Great job!

Does look great, I see you painted all the pieces. I would be nervous about stone chips on the rockers.

Hey IFAST the thin strips go on the top of the fascia just below where the hood mates up. You can see them in place in this picture

Caliman93230 · 01-28-2012, 11:38 AM

How mu did u guys pay to get the bumper painted

TripleB · 01-28-2012, 01:50 PM

Quote:

Originally Posted by Blacknight11

Im thinking about this combo but in a diff. color. How hard was it to get that hood to work with the Zl1 bumper? Did you have to make any major ajustments to either part

I don't have any of it yet, but planning on it.

sene · 01-28-2012, 02:11 PM

Quote:

Originally Posted by Caliman93230

How mu did u guys pay to get the bumper painted

I paid $150 at a shop in Gardena. PM if you need the contact info.

paulsandhu · 01-28-2012, 06:50 PM

Quote:

Originally Posted by FRSTKIDCAMARO

The Final Product. 45th with ZL-Front Rear and Spoiler.

Wow. I'm sold. I'm definitely going to be doing that. How many hours did it take for you to get that all done?

SYN3RG · 01-28-2012, 07:11 PM

would anyone have any idea, i placed the order with pace performance on everything except the lighting, bolts, and the right fog bezel (backordered), and drl harness (backordered) earlier today. I just read that the ZL1 productions just went into place does that mean that my order with some parts could become backorder, leaving me searching for several different peaces

jsharp · 01-28-2012, 07:15 PM

Availability of parts in my opinion will slow a little bit due to production and top priority will most likely go to vin cars. However on the bright side if gm is able to make enough parts to keep up with the orders then maybe they will put a few on the shelves time to time. I hope! I am ready for my hood and insert!

SYN3RG · 01-28-2012, 07:22 PM

Do you think I will receive my complete order if he placed it with GM today! I hate to only get few parts and then things not come for weeks on end, its bad enough I won't have a fog bezel for a while lol

FRSTKIDCAMARO · 01-28-2012, 07:31 PM

Quote:

Originally Posted by paulsandhu

Wow. I'm sold. I'm definitely going to be doing that. How many hours did it take for you to get that all done?

Considering the time to paint.
Front End: 5 hours
Rear End: 9 hours
Spoiler 1 hour

This was the install time it took me with my guys to complete after painting.

Gene Culley · 01-29-2012, 11:50 AM

Hello All,

Here is a link to our conversion pricing...http://www.camaro5.com/forums/showthread.php?t=196190. Our conversion is $1228.99 and it does not include the grille at this time since it is not out.

Some kits may be less or people may have mentioned they got the parts for under $1000. This is true, I'm sure, but not all of the actual pieces necessary, such as the lights, the GM hardware, etc. We did not skimp or otherwise cut down on the parts on the conversion. I am a very picky individual and I wanted everything to be exactly like the ZL1 front bumper. I want the GM fasteners, the GM hardware, etc. So when I do the conversion on my car it will be with this list. Our kit consists of 97 part numbers and 126 total pieces.

If you would like to cut out the lights or the GM hardware, that is fine, we have a complete conversion list, dear to us, and we will be happy to remove things off the list for you. If you want to use other lights, no problem or other hardware no problem.

Thanks,
Gene.

P.S. Our kit comes with 97 part numbers with 126 total pieces. This is using all ZL1 lamps and all Genuine GM hardware. We can take out the lights, etc. This is also with all of the brackets that come on the OEM bumper to fenders and plastic pieces riveted to the top of the bumper. If you want to remove a bunch of that to save money and reuse your existing, that is fine, but this is a COMPLETE KIT. This is what we were asked for. We also stated we would remove anything off the list that you wanted!

2SSRS@Gen5diy · 01-29-2012, 11:56 AM

Quote:

Originally Posted by SYN3RG

would anyone have any idea, i placed the order with pace performance on everything except the lighting, bolts, and the right fog bezel (backordered), and drl harness (backordered) earlier today. I just read that the ZL1 productions just went into place does that mean that my order with some parts could become backorder, leaving me searching for several different peaces

Harness has bean on back order for some time but i have some, here and bezel i got 2 sets on Friday There not back ordered.

11 Camaro IBM · 01-29-2012, 12:43 PM

Ofer do you know if mine shipped? Thanks

Ray@RDS · 01-29-2012, 12:53 PM

Thanks Ofer, together we have just about completed MY DIY Zl1 build.

Ray@RDS · 01-29-2012, 12:55 PM

thx for the harness adapter Ofer, works great! fogs come on when lights come on. Drl's on when the lights are off! PERFECT!!!!

01-28-2012, 11:38 AM	#1374
Caliman93230 Drives: LS3S/C Join Date: Aug 2008 Location: CALI Posts: 1,344	How mu did u guys pay to get the bumper painted __________________ MODS whipple 2.9L s/c, ADM race scoop, 600 rwhp 550 wrtq, .

01-28-2012, 07:15 PM	#1379
jsharp NOW CAMMED & SUPERCHARGED Drives: 2010 Camaro 2SS/RS Black w/ IOM Join Date: Oct 2008 Location: Ar Posts: 2,336	Availability of parts in my opinion will slow a little bit due to production and top priority will most likely go to vin cars. However on the bright side if gm is able to make enough parts to keep up with the orders then maybe they will put a few on the shelves time to time. I hope! I am ready for my hood and insert! __________________ Livernois Motorsports: Maggie 2300 7psi, Livernois 2C cam/L99 to LS3 Conversion, Ported TB, Rotofab w/adm race scoop, adm trans cooler,Kooks headers no cats, Kooks 3" exhaust. METCO breather. Precision 2400 Vigilante TC. Eibach Lowering Springs & Swaybars. BMR Trailing arms, BMR Rear Cradle Bushings, BMR Toe Rods, BMR Differential bushings. Vossen CV3 20's w/ 305 Mickey Thompson @25psi. Zl1 front bumper. OE Zl1 Hood and matte black insert. 556RWHP/500RWTQ L99

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CAMARO WIKI	Tran	Wiki	67	11-27-2024 09:02 AM
Gran Turismo 5 November 24th, 2010	Nezacant	Gaming Lounge	562	04-21-2011 10:23 PM
Winner, winner - Jalopnik compares the Big 3	Number 3	5th Gen Camaro SS LS LT General Discussions	31	04-17-2011 04:24 PM
Pedders Suspension Benchmark Track Testing and New Jersey Track Day	Info@PeddersUSA.com	USA - NY / NJ / PA	35	10-26-2009 06:20 PM
#4768 - Delivered and Made Ready the Right Way!	Number_9	5th Gen Camaro SS LS LT General Discussions	62	07-16-2009 03:42 AM

01-28-2012, 07:11 PM	#1378
SYN3RG Drives: 2006 Jeep SRT8 Join Date: Sep 2011 Location: Michigan Posts: 31	would anyone have any idea, i placed the order with pace performance on everything except the lighting, bolts, and the right fog bezel (backordered), and drl harness (backordered) earlier today. I just read that the ZL1 productions just went into place does that mean that my order with some parts could become backorder, leaving me searching for several different peaces

01-28-2012, 07:22 PM	#1380
SYN3RG Drives: 2006 Jeep SRT8 Join Date: Sep 2011 Location: Michigan Posts: 31	Do you think I will receive my complete order if he placed it with GM today! I hate to only get few parts and then things not come for weeks on end, its bad enough I won't have a fog bezel for a while lol

01-29-2012, 11:50 AM	#1382
Gene Culley Account Suspended Drives: 2013 SS Join Date: Dec 2009 Location: Boyertown, PA Posts: 1,374	Hello All, Here is a link to our conversion pricing...http://www.camaro5.com/forums/showthread.php?t=196190. Our conversion is $1228.99 and it does not include the grille at this time since it is not out. Some kits may be less or people may have mentioned they got the parts for under $1000. This is true, I'm sure, but not all of the actual pieces necessary, such as the lights, the GM hardware, etc. We did not skimp or otherwise cut down on the parts on the conversion. I am a very picky individual and I wanted everything to be exactly like the ZL1 front bumper. I want the GM fasteners, the GM hardware, etc. So when I do the conversion on my car it will be with this list. Our kit consists of 97 part numbers and 126 total pieces. If you would like to cut out the lights or the GM hardware, that is fine, we have a complete conversion list, dear to us, and we will be happy to remove things off the list for you. If you want to use other lights, no problem or other hardware no problem. Thanks, Gene. P.S. Our kit comes with 97 part numbers with 126 total pieces. This is using all ZL1 lamps and all Genuine GM hardware. We can take out the lights, etc. This is also with all of the brackets that come on the OEM bumper to fenders and plastic pieces riveted to the top of the bumper. If you want to remove a bunch of that to save money and reuse your existing, that is fine, but this is a COMPLETE KIT. This is what we were asked for. We also stated we would remove anything off the list that you wanted!

01-29-2012, 12:43 PM	#1384
11 Camaro IBM Drives: Camaro IBM Join Date: Aug 2011 Location: Tx Posts: 1,007 View My Garage	Ofer do you know if mine shipped? Thanks

01-29-2012, 12:53 PM	#1385
Ray@RDS Drives: 2010 2SS/RS Join Date: Sep 2011 Location: Mn Posts: 481	Thanks Ofer, together we have just about completed MY DIY Zl1 build.

01-29-2012, 12:55 PM	#1386
Ray@RDS Drives: 2010 2SS/RS Join Date: Sep 2011 Location: Mn Posts: 481	thx for the harness adapter Ofer, works great! fogs come on when lights come on. Drl's on when the lights are off! PERFECT!!!!