You are browsing camaro5 
 |
|
02-01-2012, 02:38 AM
|
#15 |
 
Drives: 2010 Camaro 2SS Aqua Metallic Blue Join Date: Jun 2010
Location: socal
Posts: 167
|
hmm that could be true. but would that be enough to make the car make so much noise?
__________________
|
|
|
|
02-01-2012, 03:17 AM
|
#16 |
   
Drives: Rally Yellow Camaro+Avalanche Join Date: Dec 2009
Location: Vancouver
Posts: 1,110
|
What kind of grease did they use? The bars should have come with that clear/opaque grease that is really, really sticky. Can't recall the name, but someone will chime in, I'm sure. Regular axle grease will squish out and wear away.
Can you hear the sqeaking if you open your hood and then bounce the car up and down? Or shake it side to side? BTW, there is no reason to do an alignment after only sway bars.
__________________
Vengeance Kaotik Cam, C.A.I., ARH LT, Pypes Cat Back, ZL1 Shifter+2012LS3VERT bushing, Quantum Brake Ducts, JDP Tow Hook Scorch Yellow Trim Kit, Shark Fin, AAC DRLs+ABLs+SMDs, ZTA Rear Spoiler, R.Y. 1LE Splitter. Pfadt coilovers, camber plates, trailing arms, Pegasus Solid Subframe. Pedders ZL1 barz, radius arm & steering rack bushings. BMR adjustable toe-rods. Hotchkis Max Chassis Brace. ZL1 GMPP Driveline Upgrade. TurnOne P/S pump. CTS-V 6 pistons.
447 HP @ 6180 RPM / 418 TQ @ 5100 RPM |
|
|
|
|
02-01-2012, 10:35 AM
|
#17 |
Drives: 2011 Mustang RTR Join Date: Jan 2012
Location: Redondo Beach Ca
Posts: 146
|
Bring the car by today and let me take a look at it please.
Also what end links are you running? |
|
|
|
|
02-01-2012, 11:40 AM
|
#18 | |
Drives: 2010 Camaro, 2006 Z06 Join Date: Feb 2009
Location: SLC, UT
Posts: 3,370
|
Quote:
|
|
|
|
|
|
02-01-2012, 01:11 PM
|
#19 |
 Drives: 2011 2SS/RS Camaro Join Date: Jun 2011
Location: New York
Posts: 41
|
Is there a shaft collar bolted onto the sway bar to keep the bar centered? I would check to make sure the sides of the collar where it will rub the bushing is lubed as well.
|
|
|
|
|
02-01-2012, 04:24 PM
|
#20 |
|
Drives: Rally Yellow Camaro+Avalanche Join Date: Dec 2009
Location: Vancouver
Posts: 1,110
|
Well, the expensive fix would be to get a really loud exhaust! ^_^
__________________
Vengeance Kaotik Cam, C.A.I., ARH LT, Pypes Cat Back, ZL1 Shifter+2012LS3VERT bushing, Quantum Brake Ducts, JDP Tow Hook Scorch Yellow Trim Kit, Shark Fin, AAC DRLs+ABLs+SMDs, ZTA Rear Spoiler, R.Y. 1LE Splitter. Pfadt coilovers, camber plates, trailing arms, Pegasus Solid Subframe. Pedders ZL1 barz, radius arm & steering rack bushings. BMR adjustable toe-rods. Hotchkis Max Chassis Brace. ZL1 GMPP Driveline Upgrade. TurnOne P/S pump. CTS-V 6 pistons.
447 HP @ 6180 RPM / 418 TQ @ 5100 RPM |
|
|
|
|
02-01-2012, 05:24 PM
|
#21 |
|
|
I had the same problem after install... due to Hotchkis supply of silicone grease is hard to use ( no cartridge) shops tend to use OE lube..I bought a cartridge of sil. lube from Hotchkis and took it back to the the installer and had them relube..problem solved.
|
|
|
|
|
02-01-2012, 06:03 PM
|
#22 |
|
Drives: 2010 Camaro 2SS Aqua Metallic Blue Join Date: Jun 2010
Location: socal
Posts: 167
|
michael where exactly are you located? PM me
 and i am running stock endlinks and the shop said they used the grease that came with the sways.
__________________
|
|
|
|
|
02-01-2012, 09:26 PM
|
#23 | |
         
|
Quote:
 Santa Fe Springs, Ca 90670 By the corner of Slauson and Sorenson |
|
|
|
|
|
02-01-2012, 09:33 PM
|
#24 | |
Drives: Camaro Justice Join Date: Jun 2007
Location: Virginia
Posts: 20,170
|
Quote:
|
|
|
|
|
|
02-03-2012, 09:50 AM
|
#25 |
|
Drives: 2011 Mustang RTR Join Date: Jan 2012
Location: Redondo Beach Ca
Posts: 146
|
I sent a PM to you alybud. Did you get it?
|
|
|
|
|
02-03-2012, 06:05 PM
|
#26 |
|
Drives: 2010 Camaro 2SS Aqua Metallic Blue Join Date: Jun 2010
Location: socal
Posts: 167
|
yeah i did!
__________________
|
|
|
|
|
02-05-2012, 03:01 PM
|
#27 |
|
Drives: 2010 Camaro 2SS Aqua Metallic Blue Join Date: Jun 2010
Location: socal
Posts: 167
|
so i got the car back from the shop and all the squeaking is gone! they just took of the front sway bar and relubed everything and now the car is completely silent!
__________________
|
|
|
|
|
02-05-2012, 03:21 PM
|
#28 | |
|
Drives: Camaro Justice Join Date: Jun 2007
Location: Virginia
Posts: 20,170
|
Quote:
|
|
|
|
|
|
|
|
|
 |
| Tags |
| hotchkis, noise, squeaking, sway bars, thumping |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 1st and 2nd gear problems. 1SS 6M | jnm2003 | V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6) | 7 | 10-29-2019 01:22 PM |
| Hotchkis Strut Tower Brace for Magnacharger Available at MTI Racing | MTI Racing Kevin | Suspension / Chassis / Brakes | 0 | 01-27-2011 12:33 PM |
| 2010 Camaro Race Pack by Hotchkis | Xplosive Performance | Suspension / Chassis / Brakes | 1 | 12-09-2010 12:03 PM |
| Problems from cutouts | LS3_Man | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 8 | 06-05-2010 03:57 PM |
| The wait for Hotchkis Springs is over! | Hotchkis | Suspension / Chassis / Brakes | 10 | 02-06-2010 10:31 PM |
