FIRST Camaro Wide Body in Texas in carbon fiber finish

[calbert1999]

Not perfect but, really awesome looking, and original.

[TaylorRyanSS]

Originally Posted by MY1STCAMAR0

Oh really? Damn I guess I won't be getting that then, lol. Thanks for the info!

I have that spoiler and mine fits fine. No work required and I used the stock holes. This is the first I have heard of it not fitting.

[Trevorw24]

This car is nuts!!!!!!

[Rockin the BlueSS]

i really like the widened rear and the fuel cap relocation! my only question is with the amount af fabrication put into this rear end why did you reuse the stock exhaust trim? you could have had a slick piece machined and have been as custom and jaw dropping as the rest of the car. You could have used cues from the stock pieces if that is what you were going for...

Great job, just my $.02

[andredmg]

Pretty freakin awesome work of art and its unique, nothing like it out there. I think custom is always cool, congrats on a bad arse whip!!!

[thasleeper]

I'm a big fan!!! Awesome work. Are you planing any show and tell of the car?

[Hennesseyrgv]

Originally Posted by Rockin the BlueSS

i really like the widened rear and the fuel cap relocation! my only question is with the amount af fabrication put into this rear end why did you reuse the stock exhaust trim? you could have had a slick piece machined and have been as custom and jaw dropping as the rest of the car. You could have used cues from the stock pieces if that is what you were going for...

Great job, just my $.02

Time was a big deal on me, now that I have my car back I am sure I can enjoy it and think how I can emprove some stuff. Right now I am really taking all the feed back from Camaro5 fans. And maybe consider some changes.

[Rockin the BlueSS]

Originally Posted by Hennesseyrgv

Time was a big deal on me, now that I have my car back I am sure I can enjoy it and think how I can emprove some stuff. Right now I am really taking all the feed back from Camaro5 fans. And maybe consider some changes.

Good to hear, it sounds like your car will be an ever evolving piece of rolling art. and the good new is that the difficult part built into the car (ie: wideneing panels, carbon fiber, and gas cap relocation) are awesome. the exhaust panels are built onto whats looks like trim piece so that should be very easy to change when the time comes.

BTW is this mostly a show car? i have noticed from the pics that you have a NOS bottle mounted in the passenger side foot well... i guess there goes my chance of getting a ride lol

[TaylorRyanSS]

In that case, my suggestions would be to redo the diffuser. The lines do not flow with the rear at all, and the tips look awkward. Another thing is the tires stick out way to much, I think the specs of the wheels are not right for the car. Also too much tire is showing from the back. Maybe the rear bumper needs to be widened down lower as well. My favorite part is the gas cap location!

[SUX2BU]

Originally Posted by TaylorRyanSS

In that case, my suggestions would be to redo the diffuser. The lines do not flow with the rear at all, and the tips look awkward. Another thing is the tires stick out way to much, I think the specs of the wheels are not right for the car. Also too much tire is showing from the back. Maybe the rear bumper needs to be widened down lower as well. My favorite part is the gas cap location!

He has big spacers on the rears, that's what pushes the wheels out.

[Hennesseyrgv]

Has any body notice, check this out, on a factory Camaro stand from the back looking towards the trunk, you will learn that the right top side is made or looks lower that the left top of the quarter pannel. in my case I will be looking at the area where I relocated my fuel . I encounter this proablem while doing my widebody.

[Carriccp]

Originally Posted by TaylorRyanSS

In that case, my suggestions would be to redo the diffuser. The lines do not flow with the rear at all, and the tips look awkward. My favorite part is the gas cap location!

x2. I like the gas cap relocation and can respect the amount of work that went into the car and rear, but beyond that...not my thing.

[Maro99]

Originally Posted by Hennesseyrgv

Time was a big deal on me, now that I have my car back I am sure I can enjoy it and think how I can emprove some stuff. Right now I am really taking all the feed back from Camaro5 fans. And maybe consider some changes.

Since you are looking for feed back heres what I think..

First, if you went through all of the trouble to widen the rear I think you should either vent the quarters or fill in and smooth out the gills. The rear tires should be tucked in more. The rear bumper looks ok but the exhaust openings really throw it off due to there shape, they actually look crooked to me. Also the transition from the widened rear quarters to the rear bumper looks off. Where they come together it looks as if the bumper should be wider to match up with the quarters. Gas cap is awesome as well as the CF work.. There are two other things that if you did I think would really set it off. 1 being get the rear tires tucked in further and get air suspension so you can slam it and have the tires/wheels up in the wheel wells.. I think that would be totally bad ass. Another thing I always thought would be cool is to do a complete two tone with the whole top half of the car in CF. That would probably be really expensive but I always thought that would look great especially on your car. Anyway, these are just my opinions, if you dont agree I understand just wanted to give you some ideas/opinions I have on what I think would make your car look perfect. Either way you have a bad ass custom Camaro on your hands. Congrats..

Could you post some pics from the front and side with the doors closed and some more of the interior please?

Thanks

[Hennesseyrgv]

Originally Posted by Maro99

Since you are looking for feed back heres what I think..

First, if you went through all of the trouble to widen the rear I think you should either vent the quarters or fill in and smooth out the gills. The rear tires should be tucked in more. The rear bumper looks ok but the exhaust openings really throw it off due to there shape, they actually look crooked to me. Also the transition from the widened rear quarters to the rear bumper looks off. Where they come together it looks as if the bumper should be wider to match up with the quarters. Gas cap is awesome as well as the CF work.. There are two other things that if you did I think would really set it off. 1 being get the rear tires tucked in further and get air suspension so you can slam it and have the tires/wheels up in the wheel wells.. I think that would be totally bad ass. Another thing I always thought would be cool is to do a complete two tone with the whole top half of the car in CF. That would probably be really expensive but I always thought that would look great especially on your car. Anyway, these are just my opinions, if you dont agree I understand just wanted to give you some ideas/opinions I have on what I think would make your car look perfect. Either way you have a bad ass custom Camaro on your hands. Congrats..

Could you post some pics from the front and side with the doors closed and some more of the interior please?

Thanks

I will post more pics from the interior in a bid, I have to upload them ,just bare with me.