Adding a ZL1 front end to your car. - Page 114 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

11 Camaro IBM · 02-09-2012, 07:14 PM

Try gm parts house I got mine there

Caliman93230 · 02-09-2012, 07:25 PM

Hi guy's need some help, Im getting ready to instal the bumper but Im kinda clueless on where some of the blots and rivets go? Im thinking the rivets go on top of the bumper and I need a rivet gun, the flares i have no idea what type of blots to use, and finally where do i use the rest of the 10 nuts and bolts left do they all go at the bottom, thanks guys appreciate some help

11 Camaro IBM · 02-09-2012, 07:37 PM

The clip nuts go to the bottom of the spliter and the bolts hold the splitter and lower support..reuse the clip nuts that are in your old wheel wells to hold the side flares in and there's 2 bolts at the bottom of the flares that hold them in to

Ray@RDS · 02-09-2012, 07:47 PM

The side extensions are supposed to be rivited on the inside 2 per side, the remaining side holes are for the fenderliner clips and fastners, and a bolt goes up from the bottom thru the lower grill(splitter)on both sides.

Ray@RDS · 02-09-2012, 07:49 PM

The 4 rivits required(#22 on the illustration) are different than the upper ones used for the garnish cover.

Caliman93230 · 02-09-2012, 08:01 PM

Quote:

Originally Posted by 11 Camaro IBM

The clip nuts go to the bottom of the spliter and the bolts hold the splitter and lower support..reuse the clip nuts that are in your old wheel wells to hold the side flares in and there's 2 bolts at the bottom of the flares that hold them in to

ok so the rest of the bolts all go to the bottom of the spliter ?

Caliman93230 · 02-09-2012, 08:14 PM

Quote:

Originally Posted by Ray@RDS

The 4 rivits required(#22 on the illustration) are different than the upper ones used for the garnish cover.

is there a part number # for the rivets that go on the garnish?

2SSRS@Gen5diy · 02-09-2012, 08:22 PM

There the 10 i posted, the # for the 4 you need for the side extensions are part # 92139150

Caliman93230 · 02-09-2012, 08:36 PM

Quote:

Originally Posted by 2SSRS

There the 10 i posted, the # for the 4 you need for the side extensions are part # 92139150

sorry im visual learner so the rivets #992231490 are to hold the reused plastic that goes on top of the bumper ?

orangejuice · 02-09-2012, 08:38 PM

Quote:

Originally Posted by Caliman93230

sorry im visual learner so the rivets #992231490 are to hold the reused plastic that goes on top of the bumper ?

Yes, the plastic rivets are used for the trim pieces

2SSRS@Gen5diy · 02-09-2012, 08:39 PM

Yes.

Caliman93230 · 02-09-2012, 08:39 PM

Quote:

Originally Posted by orangejuice

Yes, the plastic rivets are used for the trim pieces

thank you

Funkymaddox · 02-11-2012, 03:56 AM

stupid question, but how close to the ground is the front without lowering springs or simillar? because i have eibach sport springs installed, which makes the car a little lower.
and i want to drive over speedbumpers without scatching on the ground all the time or when you drive in a underground parkinghouse with a slope of 20°+ :P

SYN3RG · 02-11-2012, 08:59 AM

here is the zl1 front on the sgm!!! this was the only way to take a picture sorry about the snow. The bumper has to go back to paint its a few shades to dark. Im still questioning the heritage grill. oh and the first picture is the car in the body shop, that fix came out great!

02-09-2012, 07:25 PM	#1584
Caliman93230 Drives: LS3S/C Join Date: Aug 2008 Location: CALI Posts: 1,344	Hi guy's need some help, Im getting ready to instal the bumper but Im kinda clueless on where some of the blots and rivets go? Im thinking the rivets go on top of the bumper and I need a rivet gun, the flares i have no idea what type of blots to use, and finally where do i use the rest of the 10 nuts and bolts left do they all go at the bottom, thanks guys appreciate some help Attached Images __________________ MODS whipple 2.9L s/c, ADM race scoop, 600 rwhp 550 wrtq, .

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CAMARO WIKI	Tran	Wiki	67	11-27-2024 09:02 AM
Gran Turismo 5 November 24th, 2010	Nezacant	Gaming Lounge	562	04-21-2011 10:23 PM
Winner, winner - Jalopnik compares the Big 3	Number 3	5th Gen Camaro SS LS LT General Discussions	31	04-17-2011 04:24 PM
Pedders Suspension Benchmark Track Testing and New Jersey Track Day	Info@PeddersUSA.com	USA - NY / NJ / PA	35	10-26-2009 06:20 PM
#4768 - Delivered and Made Ready the Right Way!	Number_9	5th Gen Camaro SS LS LT General Discussions	62	07-16-2009 03:42 AM

02-09-2012, 07:14 PM	#1583
11 Camaro IBM Drives: Camaro IBM Join Date: Aug 2011 Location: Tx Posts: 1,007 View My Garage	Try gm parts house I got mine there

02-09-2012, 07:37 PM	#1585
11 Camaro IBM Drives: Camaro IBM Join Date: Aug 2011 Location: Tx Posts: 1,007 View My Garage	The clip nuts go to the bottom of the spliter and the bolts hold the splitter and lower support..reuse the clip nuts that are in your old wheel wells to hold the side flares in and there's 2 bolts at the bottom of the flares that hold them in to

02-09-2012, 07:47 PM	#1586
Ray@RDS Drives: 2010 2SS/RS Join Date: Sep 2011 Location: Mn Posts: 481	The side extensions are supposed to be rivited on the inside 2 per side, the remaining side holes are for the fenderliner clips and fastners, and a bolt goes up from the bottom thru the lower grill(splitter)on both sides.

02-09-2012, 07:49 PM	#1587
Ray@RDS Drives: 2010 2SS/RS Join Date: Sep 2011 Location: Mn Posts: 481	The 4 rivits required(#22 on the illustration) are different than the upper ones used for the garnish cover.

02-09-2012, 08:22 PM	#1590
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,728 View My Garage	There the 10 i posted, the # for the 4 you need for the side extensions are part # 92139150

02-09-2012, 08:39 PM	#1593
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,728 View My Garage	Yes.

02-11-2012, 03:56 AM	#1595
Funkymaddox Drives: 2011 Camaro 2LT/RS Join Date: Jan 2011 Location: New Mexico Posts: 67	stupid question, but how close to the ground is the front without lowering springs or simillar? because i have eibach sport springs installed, which makes the car a little lower. and i want to drive over speedbumpers without scatching on the ground all the time or when you drive in a underground parkinghouse with a slope of 20°+ :P

02-11-2012, 08:59 AM	#1596
SYN3RG Drives: 2006 Jeep SRT8 Join Date: Sep 2011 Location: Michigan Posts: 31	here is the zl1 front on the sgm!!! this was the only way to take a picture sorry about the snow. The bumper has to go back to paint its a few shades to dark. Im still questioning the heritage grill. oh and the first picture is the car in the body shop, that fix came out great!