Jacksonville Camaro Club

[SURPRYZ]

Originally Posted by larryt1026

I'd like my calipers powdercoated!

He does those too!

[GTAHVIT]

Originally Posted by SURPRYZ

I was thinking the same thing.....

on a side note.....

Any of you guys interested in getting anything in your cars powdercoated?

http://74.53.193.88/~rivercit/forum/...?topic=2531.45

I just posted over there. Thanks!

[Addiction]

Originally Posted by thespymaster

Response from NMCA " NMCA NHRA rules apply. The need for a roll cage depends on your ET and/or MPH"

That means I would need a cage if its NHRA rules.

[SURPRYZ]

Originally Posted by GTAHVIT

I just posted over there. Thanks!

No problem. He actually just got done coating a set of calipers. He should have pics up as soon as they cool down.

[GTAHVIT]

Originally Posted by SURPRYZ

No problem. He actually just got done coating a set of calipers. He should have pics up as soon as they cool down.

Very cool. If you guys trust him, I can.

[larryt1026]

Originally Posted by SURPRYZ

No problem. He actually just got done coating a set of calipers. He should have pics up as soon as they cool down.

What was the damage if you dont mind me asking?

[SURPRYZ]

Originally Posted by larryt1026

What was the damage if you dont mind me asking?

Not at all. Dustin's very good. Pricing will depend upon color needed and size of object. I would PM him for pricing and color selection.

[Black02SS]

Hey guys,

I'm actually the one doing coatings. You can check my feedback and transaction history on www.ls1tech.com under the username 02blackbullet. I have nearly 100 transactions and all with 100% positive feedback. I always do my best on every job. It doesn't matter if I'm detailing, powder coating or porting. If its not right, you aren't getting it back until it is.

I never let crap go out my door. My reputation is everything to me and I stand by my work. No shortcuts, no excuses...ever.

Also, I've known Rick for years and I'm a co-owner of www.rivercityperformance.com and as a matter of fact, I may have met many of you already if you go to the EFI cruise-ins/cook outs and dyno days.

I've got the black 2002 Camaro SS on Fikse wheels with powder coated centers and a 408.

Here's a caliper I did earlier today. Please keep in mind this is a rough cast piece which was not smoothed down or anything.







Here's a valve cover I had sitting around. Rough sides and bolt holes but just trying a new color out.





A throttle body I just ported and coated earlier in the week (still have to polish the port job (too busy!)



If you need anything, just come on over to our site and post up or just shoot me a text.

Thanks guys,

Dustin

[SURPRYZ]

Cleaned up version For powdercoating:

http://74.53.193.88/~rivercit/forum/...p?topic=2580.0

[GTAHVIT]

Keep in mind Camaro5 has very strict rules here regarding soliciting business.

Please keep it very low key. Otherwise you'll be banned from posting here by the admin.

We'll be sure to send people to you as often as we can. but be very careful about overtly offering your services here without paying to be a sponsor.

[Black02SS]

Understood. Thanks for the warning. I wasn't aware of that. I'm really only doing the work for local guys on a very small scale with low overhead and very little mark up and working for very...very low profit after all bills and such are paid. Its really only covering the coating of my own parts. Having said that, I have no overhead worked in for advertising costs and if an admin sees issue with my post, please feel free to delete my post and accept my apologies for the intrusion.

[GTAHVIT]

Originally Posted by Black02SS

Understood. Thanks for the warning. I wasn't aware of that. I'm really only doing the work for local guys on a very small scale with low overhead and very little mark up and working for very...very low profit after all bills and such are paid. Its really only covering the coating of my own parts. Having said that, I have no overhead worked in for advertising costs and if an admin sees issue with my post, please feel free to delete my post and accept my apologies for the intrusion.

NO need to apologize, and thanks very much for understanding... we have a couple companies that we support that don't pay to be a sponsor here. Hartley Automotive, EFI, and others. We have found a painter that can do some custom and repair work. Having a powder coater that we can to our list of local guys will be awesome!

So please don't feel like you can't be here and interact with us, just be careful about posting pricing and services...

I hope that makes sense,

Chris

[Black02SS]

Perfect sense. Thank ya sir.

Prices were pulled from the thread. If anyone needs anything, please follow the link to our local board where you can get any information you need.

Thanks

[Addiction]

Jim to the rescue......again

My exhausted had come loose and was putting pressure on my body kit. Jim got it set back up perfect! Thanks a ton brother!

Hartley Automotive always great work and great price. But the reason I bring my car there is I trust my car will be treated better then I treat it myself. Thanks again Jim!