ANNOUNCMENT: JDP Motorsports is Finalizing it's Color Changing RS Halo Package! - Page 19 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

MackMan · 03-10-2012, 10:08 AM

Excited! It's getting closer!!! I just ordered mine the other day, so I'll probably get mine last but oh well it's only a few weeks away!

572HP · 03-10-2012, 06:43 PM

Well my tracking shows that only the ups label was made. It doesn't show that anything has shipped yet. Might not be shipped till Monday???

rjdapilmoto · 03-10-2012, 10:49 PM

Quote:

Originally Posted by 01pewterz28

You will get an email from UPS giving you your tracking number

Now that's what I'm talkin' about!!!!

OKCwhiteKnight · 03-11-2012, 09:30 PM

If you got a tracking #, when did you order?

rjdapilmoto · 03-11-2012, 10:03 PM

I think my set is shipping out tomorrow!

01pewterz28 · 03-11-2012, 10:35 PM

Quote:

Originally Posted by OKCwhiteKnight

If you got a tracking #, when did you order?

I ordered mine the 1st day they were available for pre-order back in December.

mbrusco103 · 03-11-2012, 10:40 PM

I ordered mine the first day as well but haven't received a tracking number yet

572HP · 03-12-2012, 07:36 AM

Also ordered the first day. Got the tracking number, but doesn't look like it has shipped yet.

01pewterz28 · 03-12-2012, 09:02 AM

Normally for UPS ground orders once the label has been created they pick up the next business day (meaning today) this is how it works for my business unless we drop our boxes off at UPS.

cheech4235 · 03-12-2012, 09:24 PM

Just received tracking number and scheduled to be delivered on Friday, perfect for Saturday install!!
Ordered on Dec 14th 2011.

Cant Wait!!!

cubjag · 03-12-2012, 09:41 PM

I got one as well, I ordered on 12/14.

572HP · 03-13-2012, 11:41 AM

Quote:

Originally Posted by 572HP

Also ordered the first day. Got the tracking number, but doesn't look like it has shipped yet.

I received the tracking on Friday, but mine wasn't shipped until Monday. Now scheduled for delivery this Friday.

JDP Tech · 03-14-2012, 02:08 AM

More kits shipped today!

Quote:

Originally Posted by Synerbee

The kit comes with RGB leds which allow you to choose white. The factory led gets removed

Sent from my DROID2 using Tapatalk

Quote:

Originally Posted by yotaman96

Are you sure it gets removed? I'm still trying to figure out how that's possible without opening the headlight.

Quote:

Originally Posted by KalCorp

The lights do have a little door that can be open with a couple of screws. Dont know if they are using that or not.

Correct, you do disconnect parts of the headlight exterior to gain access to the interior, they are factory removable parts, so the headlight is not ruined or altered, and they bolt right back on using the same factory screws, no glue is required.

Quote:

Originally Posted by chozn4service

I've been in touch with Jeremy of JDP and he said this mod required no taking apart of the headlights or housing. It consist of some simple taps and connections with their own harness they have fab'd. The whole point of this mod was so that you DIDN'T have to tear into the lights. Some are and have asked or suggested if they (JDP) come up with a kit for non-RS lights they would jump on but obviously that would probably require the lights to be taken apart. The first post from JDP tells what this mod consist of.
Someone even said they have their front bumper off in wait of their kit to come and I'm not sure if that's really needed or necessary since it is, by Jeremy's statements of just tapping and connecting their harness.

Sorry if I was misleading, I didn't mean to if I was, but you do have to remove the front fascia, both headlights, and open the headlights through the factory removable "doors". Unfortunately, there is no possible way to dependably get the factory white LED to change to multiple colors with wiring, though that would be cool!
One of the beauties of this kit, is that you do not have to open the headlight in any way that was not designed from the factory, leaving the factory lens seal in tact and unbroken.

Installation consists of removing the front fascia, removing both headlights, mounting the halo control box, installing the wiring harness, mounting the interior LED and switch, replacing the factory LED inside the headlights, plugging everything in, and enjoying your new light show!

There is no splicing or soldering required, the whole harness is plug and play after the components are installed.

Thanks!
- Jeremy

chozn4service · 03-14-2012, 06:34 AM

Quote:

Originally Posted by JDP Tech

Sorry if I was misleading, I didn't mean to if I was

, Thanks!
- Jeremy

Jeremy, check your PM box, thank you!

JD

03-10-2012, 10:08 AM	#253
MackMan Camaro CRAZY Drives: 2019 1SS/1LE Join Date: Apr 2011 Location: Winchester, KY Posts: 3,203 View My Garage	Excited! It's getting closer!!! I just ordered mine the other day, so I'll probably get mine last but oh well it's only a few weeks away! __________________ MACKMAN // 1LE_ORNGE

03-10-2012, 06:43 PM	#254
572HP ACE5 (Atlanta Group) Drives: "Black Ice" Join Date: Sep 2010 Location: Suwanee, GA Posts: 1,702	Well my tracking shows that only the ups label was made. It doesn't show that anything has shipped yet. Might not be shipped till Monday??? __________________ Custom Two-Tone Paint, Whipple, Pedders, NightOwl RGB Halos & Other Lighting [COTW 5/2/11] 2011 Two-Tone White/Black SS/RS Convertible See our Atlanta Social Group or home page: ACE5.org

03-11-2012, 09:30 PM	#256
OKCwhiteKnight Drives: 2010 2LT RS Camaro 2015 Colorado Join Date: Dec 2009 Location: Oklahoma Posts: 725	If you got a tracking #, when did you order? __________________

03-11-2012, 10:03 PM	#257
rjdapilmoto DAP-ONE [COTW - 12/23/13] Drives: 2010 - 2SS/RS IOM Join Date: Jul 2009 Location: San Antonio, TX Posts: 2,907 View My Garage	I think my set is shipping out tomorrow! __________________ Featured in "Wild About Cars" - October 2012 DAP-ONE's Build Journal

03-11-2012, 10:40 PM	#259
mbrusco103 Drives: 2011 2SS/RS (M6) 427 Twin Turbo Join Date: May 2008 Location: NJ Posts: 1,090 View My Garage	I ordered mine the first day as well but haven't received a tracking number yet __________________ 2011 Camaro 2SS/RS ERL 427 M6 TT -AGP Twin Turbo 55/57 .83ar \| ERL 427ci \| Squash Fuel System \| Stainless Works Chambered 3" \| Mcleod RXT \| Factory Hurst Short Throw \| Black Forgestar F14s \| CTS V 6 Piston Brembo \| VIS AMS Carbon Fiber Hood \| Anvil Carbon Fiber Spoiler

03-12-2012, 07:36 AM	#260
572HP ACE5 (Atlanta Group) Drives: "Black Ice" Join Date: Sep 2010 Location: Suwanee, GA Posts: 1,702	Also ordered the first day. Got the tracking number, but doesn't look like it has shipped yet. __________________ Custom Two-Tone Paint, Whipple, Pedders, NightOwl RGB Halos & Other Lighting [COTW 5/2/11] 2011 Two-Tone White/Black SS/RS Convertible See our Atlanta Social Group or home page: ACE5.org

03-12-2012, 09:02 AM	#261
01pewterz28 #TeamBeckyD Drives: 2017 HBM 2SS Convertible A8 Join Date: Aug 2008 Location: Apopka, FL Posts: 10,494 View My Garage	Normally for UPS ground orders once the label has been created they pick up the next business day (meaning today) this is how it works for my business unless we drop our boxes off at UPS. __________________ #TeamBeckyD FIFTY HBM 2SS VERT

03-12-2012, 09:24 PM	#262
cheech4235 Drives: 2011 2SS Black RS Join Date: Nov 2011 Location: Illinois Posts: 95	Just received tracking number and scheduled to be delivered on Friday, perfect for Saturday install!! Ordered on Dec 14th 2011. Cant Wait!!!

03-12-2012, 09:41 PM	#263
cubjag Drives: 2010 Camaro 2SS/RS Black Join Date: Feb 2010 Location: Jacksonville, FL Posts: 126 View My Garage	I got one as well, I ordered on 12/14.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Halo Lights for SS? Without RS package	camaro2009	Cosmetics and Lighting Modification Discussions	1	12-14-2010 10:59 PM
Question on the RS package, and the halo lights..	thetournykid	5th Gen Camaro SS LS LT General Discussions	50	10-21-2010 09:15 AM