El Paso Chapter of Camaro5 - Page 247 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

jose1003 · 03-15-2012, 12:43 PM

Quote:

Originally Posted by AngelSpeedFreak

I have seen people put the clear bra stuff on the side gills area as well. As you know these cars have a big ass and you get rocks hitting the back gill area from the front tires spinning a lot as well.

ssummit camaro · 03-15-2012, 03:48 PM

Shades and Shawdows on the west side does it. They use VentureShield.

Quote:

Originally Posted by rrubio

Do any of you guys have a clear bra on your camaro? If so, where was it done?

rrubio · 03-16-2012, 12:32 AM

Thanks

PIANOMN · 03-16-2012, 07:01 PM

Quote:

Originally Posted by K1SSRSS

We are probably just gonna cruize to Carrizozo. IMO the Owl Cafe is ok, but it's not worth the extra 100 miles. Can't wait to for a little vacation though.

Let's plan on meeting around 11 to grab a quick bite to eat then head out of Cruces around noon to meet everyone in Carrizozo around 2ish

Who all is driving from cruces/alamogordo?

K1SSRSS · 03-16-2012, 07:21 PM

Quote:

Originally Posted by PIANOMN

Let's plan on meeting around 11 to grab a quick bite to eat then head out of Cruces around noon to meet everyone in Carrizozo around 2ish

Who all is driving from cruces/alamogordo?

Sounds good to me, were in.

danvillekidd · 03-16-2012, 08:26 PM

I don't know if I am going to be able to make it or not. Was told yesterday that we might have to work 12 hr days starting next week including the weekend.

If I can make it, are you coming through Alamogordo?

If I can't, there will be a cabin opening up.

PIANOMN · 03-17-2012, 02:58 AM

Quote:

Originally Posted by K1SSRSS

Sounds good to me, were in.

Cool!!

Quote:

Originally Posted by danvillekidd

I don't know if I am going to be able to make it or not. Was told yesterday that we might have to work 12 hr days starting next week including the weekend.

If I can make it, are you coming through Alamogordo?

If I can't, there will be a cabin opening up.

Yes definitely driving through Alamo. Let me know soon as you find out for sure so we can figure out a place to meet up on the way out. 505-382-6663

On a side note, thanks to everyone that come out tonight for the surprise party that my wife threw at Farleys! I knew something was up as soon as I saw a few TX plated camaros in the parking lot lol

Char1ieone · 03-17-2012, 10:36 AM

As man, I hope that you guys can go :( If you end up not going keep us posted, Pat(VRedC5) and Louis(Wildpony65) are planning on going but they couldn't get a room cause it was all booked.

last night was a fun time with Eric, Jose, Louis, Pat, Charlie, and Vince, thank you Genny Alten for the invite and we will miss you Vinnie-Mac!

K1SSRSS · 03-17-2012, 12:12 PM

Quote:

Originally Posted by PIANOMN

Cool!!

Yes definitely driving through Alamo. Let me know soon as you find out for sure so we can figure out a place to meet up on the way out. 505-382-6663

On a side note, thanks to everyone that come out tonight for the surprise party that my wife threw at Farleys! I knew something was up as soon as I saw a few TX plated camaros in the parking lot lol

Quote:

Originally Posted by Char1ieone

As man, I hope that you guys can go :( If you end up not going keep us posted, Pat(VRedC5) and Louis(Wildpony65) are planning on going but they couldn't get a room cause it was all booked.

last night was a fun time with Eric, Jose, Louis, Pat, Charlie, and Vince, thank you Genny Alten for the invite and we will miss you Vinnie-Mac!

It sure isn't gonna be the same around here without you Vince. Wish we could've made it lastnight, sounds like it was a great time.

For those that were not able to get a room in Ruidoso, I am pretty sure there are about 5 others from Albuquerque who are staying at another hotel, So that may be an option.

So, what do you all like to drink, I was planning on picking up a few "necessities" for next weekend.

Well off to pickup the camaro now

.

IsaacRN · 03-17-2012, 09:09 PM

I just wanted to say hello as a first time poster. I have been lurking for about a week. I bought my 1SS in Ash Gray last week, and absolutely love it. I even have my first scratch :(

My car pretty much is stock without any mods, so I don't know how helpful I would be here, but thought I would register anyway.

Cheers!!

Isaac

mws444 · 03-17-2012, 09:15 PM

Hey all, I hope everyone is doing well. Finally got caught up at work and pulled my baby into the shop. It has been in the trailer for about 7 months now.

I should be among the brotherhood again in a week or two. Parts have been ordered and I should have a little time to pull the tranny. Man I have missed my car!
Look forward to meeting all the new guys and gals, and see the veterans once again.

mws444 · 03-17-2012, 09:24 PM

Quote:

Originally Posted by IsaacRN

I just wanted to say hello as a first time poster. I have been lurking for about a week. I bought my 1SS in Ash Gray last week, and absolutely love it. I even have my first scratch :(

My car pretty much is stock without any mods, so I don't know how helpful I would be here, but thought I would register anyway.

Cheers!!

Isaac

Cool, don't worry about being stock, we all started that way, some still are. It is all about the car and fun everyone has getting together. Of course for myself I have the need to kick Rustang butt every chance I get.

IsaacRN · 03-17-2012, 10:47 PM

is that your personal garage? Very nice setup.

AngelSpeedFreak · 03-18-2012, 12:16 AM

Quote:

Originally Posted by mws444

Hey all, I hope everyone is doing well. Finally got caught up at work and pulled my baby into the shop. It has been in the trailer for about 7 months now.

I should be among the brotherhood again in a week or two. Parts have been ordered and I should have a little time to pull the tranny. Man I have missed my car!
Look forward to meeting all the new guys and gals, and see the veterans once again.

omg.... I love the rims/tires on your beast.

03-16-2012, 12:32 AM	#3447
rrubio Drives: 2012 ZL1 & 2012 Audi Q7 Join Date: Jan 2012 Location: El Paso Texas Posts: 527	Thanks __________________

03-17-2012, 09:15 PM	#3455
mws444 Drives: 701 RWHP Lingenfelter/Pedders Beast Join Date: Apr 2009 Location: El Paso Posts: 2,973	Hey all, I hope everyone is doing well. Finally got caught up at work and pulled my baby into the shop. It has been in the trailer for about 7 months now. I should be among the brotherhood again in a week or two. Parts have been ordered and I should have a little time to pull the tranny. Man I have missed my car! Look forward to meeting all the new guys and gals, and see the veterans once again. Attached Images __________________ Lingenfelter forged balanced and blueprinted LS3, Maggie TVS 2300 LPE 9.5" Rearend 3.73,LPE dual disk clutch,10/14 rib belt drive, MTI shifter,RPM Level VI,Corsa stainless cat back, Racing Brake Rotors, LPE calipers, LPE twin fuel pumps, American Racing long tube headers, GT9 cam Port and polished heads and an ADM majic tune. 701 RWHP,Fully Pedderized w/complete bushings and Sportsryder Supercar Remote resevior coilovers. CCW 505t's Nitto Invo's and DR's Beware of the LPE Brotherhood!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
South East Camaro5 Chapter Meet	GTAHVIT	USA - Southeast	238	05-25-2010 05:01 PM
What VIN is yours?	UCF w00t	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	346	03-29-2010 06:55 PM
Laws Protecting Consumers for Aftermarket Parts	strauchpete	Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum	9	01-17-2010 09:31 AM
IMPORTANT Part 1 Warranty Disputes	Zeus	Camaro Issues / Problems \| Warranty Discussions \| TSB and Recalls	11	08-25-2009 12:37 PM
Pre-packaged chap11, sounds like a good plan	Design1stCode2nd	General Automotive + Other Cars Discussion	2	11-26-2008 11:03 PM

03-16-2012, 08:26 PM	#3450
danvillekidd 2013 ZL1 Drives: 2013 ZL1 m6 Join Date: Oct 2010 Location: Avondale AZ & Indy will always be home Posts: 870 View My Garage	I don't know if I am going to be able to make it or not. Was told yesterday that we might have to work 12 hr days starting next week including the weekend. If I can make it, are you coming through Alamogordo? If I can't, there will be a cabin opening up.

03-17-2012, 10:36 AM	#3452
Char1ieone Fear the Red Bow Tie Drives: 2010 Black Camaro 2SS/RS LS3 Join Date: Jun 2009 Location: La Mesa/Las Cruces, NM & El Paso, TX Posts: 1,762 View My Garage	As man, I hope that you guys can go :( If you end up not going keep us posted, Pat(VRedC5) and Louis(Wildpony65) are planning on going but they couldn't get a room cause it was all booked. last night was a fun time with Eric, Jose, Louis, Pat, Charlie, and Vince, thank you Genny Alten for the invite and we will miss you Vinnie-Mac!

03-17-2012, 09:09 PM	#3454
IsaacRN Drives: 2012 Camaro 1SS Join Date: Mar 2012 Location: El Paso Posts: 55	I just wanted to say hello as a first time poster. I have been lurking for about a week. I bought my 1SS in Ash Gray last week, and absolutely love it. I even have my first scratch :( My car pretty much is stock without any mods, so I don't know how helpful I would be here, but thought I would register anyway. Cheers!! Isaac

03-17-2012, 10:47 PM	#3457
IsaacRN Drives: 2012 Camaro 1SS Join Date: Mar 2012 Location: El Paso Posts: 55	is that your personal garage? Very nice setup.