01-25-2012, 11:10 PM | #29 |
Drives: 2011 v-6 vert Join Date: Jan 2012
Location: biloxi, ms
Posts: 141
|
|
01-25-2012, 11:40 PM | #30 |
Drives: 2011 v-6 vert Join Date: Jan 2012
Location: biloxi, ms
Posts: 141
|
harzards on
|
03-16-2012, 08:09 AM | #31 |
Drives: 2010 Black 2SS RS A6 Inferno Join Date: Nov 2009
Location: Maryland
Posts: 1,160
|
do you have to do any cutting on these
__________________
[SIGPIC][/SIGPIC]2010 Camaro Black 2SS/RS A6 Inferno Interior Polished Rims, Sunroof
Born 11/19/09 mods: 20% tints Borla Atak cat-bak Roto-Fab intake amber footwell, dome, and trunk lighting(AAC) Decepticon Gas door Led Taillights (technostalgia) |
03-16-2012, 10:25 AM | #32 |
None at all. Fit right into pocket though very tight to get in and put nuts back on. I used long nose pliers and was able to loosen enough to get fingers on them the rest of the way. Took me about 2 hrs for full install.
__________________
2010 2SS/RS RJT, ADM CAI, Borla Shorties, Borla "S" Cat Back, Edelbrock E-Force Supercharger, GMS Wires, GMS Rear Trailing Arms, GMS Rotors, GMS End Links, GMS Tunnel Brace, GMS Rear Tie Rods, GMS 1G Suspension Package, GMS Stage 3 CNC ported heads, GMS Spec'd R12 Custom Ground Camshaft, Snow Meth Injection, GMS Custom Tuned, Norris Catch Can, MTI Brake Lines, Pfadt Coilovers, Sway Bars, Camber Kit, and Rear LCA Reinforcement, , AAC Footwell, Trunk, DRL and Dome LED Lighting, Technostalgia Tail Lights, RED B/A Pedals, Kompression Custom Wheels with Nitto tires, 621RWHP/584RWTQ
Last edited by Tom D; 03-17-2012 at 02:16 PM. |
|
03-16-2012, 11:31 AM | #33 |
Drives: 2011 Camaro Vert RS A6 Join Date: Sep 2011
Location: Texas
Posts: 244
|
Not to bad just take your time dont rush...mine took about 3 hrs.
__________________
[
|
03-16-2012, 12:56 PM | #34 |
Drives: 2010 2LT RS Camaro 2015 Colorado Join Date: Dec 2009
Location: Oklahoma
Posts: 725
|
Bad-Mab.com.....ordered 3/11, trk# 3/15 for 3/20 delivery.
__________________
|
03-16-2012, 06:21 PM | #35 |
Thanks, already got them and installed.
__________________
2010 2SS/RS RJT, ADM CAI, Borla Shorties, Borla "S" Cat Back, Edelbrock E-Force Supercharger, GMS Wires, GMS Rear Trailing Arms, GMS Rotors, GMS End Links, GMS Tunnel Brace, GMS Rear Tie Rods, GMS 1G Suspension Package, GMS Stage 3 CNC ported heads, GMS Spec'd R12 Custom Ground Camshaft, Snow Meth Injection, GMS Custom Tuned, Norris Catch Can, MTI Brake Lines, Pfadt Coilovers, Sway Bars, Camber Kit, and Rear LCA Reinforcement, , AAC Footwell, Trunk, DRL and Dome LED Lighting, Technostalgia Tail Lights, RED B/A Pedals, Kompression Custom Wheels with Nitto tires, 621RWHP/584RWTQ
|
|
03-16-2012, 10:16 PM | #36 | |
Drives: 2010 Camaro SS RS Join Date: Dec 2011
Location: Kansas
Posts: 163
|
Quote:
__________________
Only those who will risk going too far can possibly find out how far one can go. --T.S. Eliot
|
|
03-16-2012, 10:19 PM | #37 | |
Account Suspended
Drives: nothing Join Date: Nov 2010
Location: a hole
Posts: 17,906
|
Quote:
|
|
03-16-2012, 10:45 PM | #38 |
Drives: Camaro Join Date: Feb 2012
Location: Land o' Lakes
Posts: 38
|
They look extremely bright
|
03-17-2012, 01:23 PM | #39 |
Suck'n Gas And Haul'n Ass
Drives: 2011 1LT/RS - 1936 Chevy Streetrod Join Date: Oct 2010
Location: Ohio
Posts: 344
|
Put mine in last May, it took about 6 hours also.
I have to call Todd Monday, I just brought the car out from storage and two of the lights are not working. The afterburner leds works but the main leds do not. Anyone have this problem? They worked great last year but now???
__________________
|
03-19-2012, 12:21 PM | #40 |
Mine took about 6 hours as well but i did'nt rush. I lost a nut, not in the hard to reach areas but by being too hasty taking one of the easy ones off.
Has anyone hooked up the show mode? Mine don't seem to flash in unison. I will post video tonight. |
|
03-20-2012, 03:41 PM | #41 |
Suck'n Gas And Haul'n Ass
Drives: 2011 1LT/RS - 1936 Chevy Streetrod Join Date: Oct 2010
Location: Ohio
Posts: 344
|
Taked to Todd at Technostalgia and he had me remove the fuse in the pink line that goes to the battery and wait about 10 min. then re-install the fuse.
That took care of the problem. He said if your battery goes died, or you disconnect it sometimes the logic boards on the tail light has to be reset. Rember this in case you ever have a problem with yours. Thank's Todd.
__________________
|
03-24-2012, 04:40 PM | #42 |
Drives: 2011 Victory Red 2SS RS M6 Join Date: Jul 2010
Location: Central Vermont
Posts: 369
|
4 TO 6 hours to install, Look great
__________________
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
DIY Hurst Short Throw Shifter Install - Pix and Video | TAG UR IT | Camaro DIY & HOW-TO instructions & discussions | 121 | 02-26-2015 10:08 AM |
Who is up for an install day for the dash ABL? (Updated) | 2010SSRSM6 | USA - California | 565 | 07-10-2012 08:41 PM |
Varam Install Success! My Thoughts.... | InfernoMan2011 | Camaro V6 LLT Engine, Exhaust, and Bolt-Ons | 2 | 07-22-2011 12:07 PM |
DIY : Install catback on 2010 Camaro SS | Nine Ball | Camaro DIY & HOW-TO instructions & discussions | 3 | 08-09-2009 04:36 PM |