Paul Jr Designs builds a Camaro - Page 28 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

orangeonwhite · 03-23-2012, 09:57 AM

his background is two wheel machines for obeast HD pigs, what is the surprise the camaro looks like it is for that same crowd?

Speed 1 · 03-23-2012, 10:16 AM

Quote:

Originally Posted by redevil11

How many of you that said the car looks like crap and other stuff can say it face to face? Especially infront of Paul Junior!!

lets see how many he sells for $80,000 ... thats the real face to face test!

.

h2oplay · 03-23-2012, 11:50 AM

Quote:

Originally Posted by orangeonwhite

his background is two wheel machines for obeast HD pigs, what is the surprise the camaro looks like it is for that same crowd?

Hmmm, you know the car does resemble a stereotypical "biker jacket"..

you might be on to something

VRYALT3R3D · 03-23-2012, 12:14 PM

Quote:

Originally Posted by Scrapppy666

the rivets are not decals, those are actual aluminum panels and real rivets holding them on, as are the copper numbers

Still looks terrible.

orangeonwhite · 03-23-2012, 02:07 PM

Quote:

Originally Posted by h2oplay

Hmmm, you know the car does resemble a stereotypical "biker jacket"..

you might be on to something

try to put his single digit iq brother and his hulk hogan father in the back seat , with his good looking wife in the passenger seat and him driving it..........you could cruise up and down sturgis and everyone would think its an new orange county chopper design.

Scalded Dog · 03-23-2012, 03:27 PM

Jr. makes an awesome bike... but his lines on the Camaro make me think that show producers said, "Hey, make something cool out of... ummm... (looking around...)... hey, this Camaro!" Kind of like going up to a comedian and saying, "Hey, you are a funny guy... say something funny!" It just doesn't quite work.

On the other hand, to detractors of the design, gotta respect the fact that he is in a position to have the opportunity! I could deride the design all day long... but God knows, nobody is ever going to hand ME a new Camaro, a Dremel tool, a blank check, and some scrap metal, and tell me to make something bitchin!'

The exterior reminds me of a car some kid had in my town, when I was a young'n... rust holes were covered up with riveted- on pieces of sheet metal. Very unique, and not bad looking... but it was an IMPROVEMENT on that ol' rust bucket. A Camaro, being a piece of unfathomable beauty to start with, is not improved with the addition of said riveted panels. On the inside, while a Hurst shifter is indeed pretty cool, it needs to be a color coordinated (okay, my inner Martha Stewart has JUST spoken, for the first time ever!). It LOOKS like an AutoZone purchase, screwed on in only minutes... maybe even no tools required. If its appearance matched the rest of the similar toned trim on the inside (or, better, if the rest of the interior matched the shifter!), at least the interior of the car would be truly badass...

hapisok · 03-23-2012, 06:11 PM

the bikes he makes from bare bones are amazing. but for the "design" that was implemented on this, it seems a bit weak. yeah, its clean and you really can't go wrong with chrome on black, but...it isn't the regular shock and awe product that he normally delivers. almost like he played it safe or ran out of budget. a couple of riveted panels, a new shift knob, upholstery update, and supercharged...and gill delete, it would have been nice to see something different. something that generally sets Paul Jr. apart from everybody else.

...not a fan of this edition

kr juice 1 · 03-23-2012, 08:00 PM

gosh that looks disgusting....just saying looks like most of his bikes he has made.....added some sheet metal to an other wise already done bike....

2011ss/rs · 03-23-2012, 09:10 PM

Looks like

Kman 2011 ss · 03-24-2012, 06:09 AM

Hope it runs better than it looks

JR3 · 03-24-2012, 09:51 PM

Dont like the car. I think the car looks bad. Paul Jr. should stick to bikes. He does a great job with bikes.

elsololobo02 · 03-24-2012, 10:12 PM

Dude, the body is made of aluminum.

Renegade · 03-25-2012, 05:17 PM

It could've been worse..Junior could've did the (entire camaro) in rivets like the Chopper he named after his wife. If your wondering what he named the bike it's called Roseanne.

The Anti-Venom & Jared Allen was nice. Maybe he should stick to Choppers and let the experts customize cars.

Huskr26 · 03-25-2012, 06:29 PM

Hey, Pauly is pi$$ed about or ragging on his Camaro so he has offered up a piece of work worthy of our praise. He calls it "APIECEOFPAULYFORALLTHEWORLDTOIDOLIZE" This will be a one of a kind

03-23-2012, 09:57 AM	#379
orangeonwhite Drives: 2010 2SS/RS M6 Join Date: Jun 2010 Location: PC Socialist WA Posts: 246	his background is two wheel machines for obeast HD pigs, what is the surprise the camaro looks like it is for that same crowd? __________________ ------------------------------------------------

03-23-2012, 06:11 PM	#385
hapisok crazier than a coconut Drives: 2010 2SS/RS LS3 Join Date: Jul 2010 Location: virginia Posts: 1,547	the bikes he makes from bare bones are amazing. but for the "design" that was implemented on this, it seems a bit weak. yeah, its clean and you really can't go wrong with chrome on black, but...it isn't the regular shock and awe product that he normally delivers. almost like he played it safe or ran out of budget. a couple of riveted panels, a new shift knob, upholstery update, and supercharged...and gill delete, it would have been nice to see something different. something that generally sets Paul Jr. apart from everybody else. ...not a fan of this edition __________________

03-23-2012, 09:10 PM	#387
2011ss/rs Drives: 11 ss/rs RJT w/Black Cherry stripes Join Date: Sep 2010 Location: Little Egg Harbor New Jersey Posts: 2,181 View My Garage	Looks like __________________

03-24-2012, 06:09 AM	#388
Kman 2011 ss Drives: '04vette- '11-1SS '11-1LS(wifes) Join Date: Feb 2011 Location: Florida Posts: 164	Hope it runs better than it looks __________________ Magnaflow catback - CAI - Foose Legend rims

03-24-2012, 09:51 PM	#389
JR3 Drives: Vette, Camaro Join Date: May 2010 Location: Southeast Posts: 130	Dont like the car. I think the car looks bad. Paul Jr. should stick to bikes. He does a great job with bikes. Last edited by JR3; 03-25-2012 at 05:56 AM.

03-23-2012, 03:27 PM	#384
Scalded Dog Drives: 2011 1LT Join Date: Mar 2012 Location: Crestline, CA Posts: 3,029	Jr. makes an awesome bike... but his lines on the Camaro make me think that show producers said, "Hey, make something cool out of... ummm... (looking around...)... hey, this Camaro!" Kind of like going up to a comedian and saying, "Hey, you are a funny guy... say something funny!" It just doesn't quite work. On the other hand, to detractors of the design, gotta respect the fact that he is in a position to have the opportunity! I could deride the design all day long... but God knows, nobody is ever going to hand ME a new Camaro, a Dremel tool, a blank check, and some scrap metal, and tell me to make something bitchin!' The exterior reminds me of a car some kid had in my town, when I was a young'n... rust holes were covered up with riveted- on pieces of sheet metal. Very unique, and not bad looking... but it was an IMPROVEMENT on that ol' rust bucket. A Camaro, being a piece of unfathomable beauty to start with, is not improved with the addition of said riveted panels. On the inside, while a Hurst shifter is indeed pretty cool, it needs to be a color coordinated (okay, my inner Martha Stewart has JUST spoken, for the first time ever!). It LOOKS like an AutoZone purchase, screwed on in only minutes... maybe even no tools required. If its appearance matched the rest of the similar toned trim on the inside (or, better, if the rest of the interior matched the shifter!), at least the interior of the car would be truly badass...

03-23-2012, 08:00 PM	#386
kr juice 1 Drives: 2010 Camaro 2ss/rs Join Date: Mar 2011 Location: Mission, TX Posts: 427 View My Garage	gosh that looks disgusting....just saying looks like most of his bikes he has made.....added some sheet metal to an other wise already done bike....

03-24-2012, 10:12 PM	#390
elsololobo02 Drives: 2014 ZL1 Join Date: Oct 2010 Location: San Diego Posts: 276 View My Garage	Dude, the body is made of aluminum.

03-25-2012, 05:17 PM	#391
Renegade Banned Drives: Camaro SS Edition Join Date: Mar 2012 Location: New York Posts: 6,840	It could've been worse..Junior could've did the (entire camaro) in rivets like the Chopper he named after his wife. If your wondering what he named the bike it's called Roseanne. The Anti-Venom & Jared Allen was nice. Maybe he should stick to Choppers and let the experts customize cars.

03-25-2012, 06:29 PM	#392
Huskr26 Drives: 1965 Corvette F.I., 2010 LT1 Camaro Join Date: Jun 2009 Location: Anaheim,CA Posts: 144	Paul's newest creation Hey, Pauly is pi$$ed about or ragging on his Camaro so he has offered up a piece of work worthy of our praise. He calls it "APIECEOFPAULYFORALLTHEWORLDTOIDOLIZE" This will be a one of a kind Attached Images __________________ Bookends!!! 1LT, Red, RS, White stripe, 20 inch Polished wheels, Manual tranny, Red BowTies, Seat and Dash covers, Airaid Air Intake, Magna flow exhaust 1965 Sting Ray 327 Fuelie, Muncie 4 speed, Side pipes, Rally Red, Black interior

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Does the v6 have enough power?	cstproductions	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	305	08-29-2012 09:27 PM
GM unveils Jay Leno Camaro, Camaro Synergy, Camaro Chroma, Camaro Dusk at SEMA	irocnroll	5th Gen Camaro SS LS LT General Discussions	101	02-27-2012 12:25 PM
Im sure this has been asked before.. But forgive my innocence :)	gmag21	Suspension / Brakes / Chassis	23	02-21-2010 10:29 PM
Pedders Suspension Benchmark Track Testing and New Jersey Track Day	Info@PeddersUSA.com	USA - NY / NJ / PA	35	10-26-2009 05:20 PM