Tracking All Currently Known US VIN and Window Stickers - Order Tracking Thread - Page 195 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

spi · 05-08-2009, 10:26 PM

Got my VIN today 6637

lrc250 · 05-08-2009, 10:59 PM

Quote:

Originally Posted by darty111

have we decided whether the stripes ARE put on at factory or at Other, or at DEALER?

White and Cyber Gray stripes are installed at the factory, the rest are dealer installed.

Number_9 · 05-08-2009, 11:30 PM

Quote:

Originally Posted by lrc250

White and Cyber Gray stripes are installed at the factory, the rest are dealer installed.

With factory actually meaning the car may be transported to Whitby, Ontario (down the road) to have the stripes applied.. then shipped back to the plant in Oshawa for QC.

edog · 05-08-2009, 11:59 PM

http://wwww23.chevrolet.com/tools/wi...=YOUR_VIN_HERE

I used this link but nothing comes up. I placed my vin where it stated...Still no results. Any clue?

Number_9 · 05-09-2009, 12:13 AM

Guys (and Gals) - I just Google'd my VIN... my dealer actually has my car listed on their website.... the picture isn't right but the details and the VIN sure are. It's really freaking me out, so much for getting any sleep tonight.

Check this out!! http://www.classicchevytx.com/VehicleDetails/408112453

Man, are they gonna get a phone call first thing in the morning... if I don't just wake up and drive over so I am there when the doors open! It's not on the lot, that I know, but what the heck! I ordered from Classic Chevrolet in Grapevine because they have a really good reputation - fBodFather was even there this past week for the 5/6 kickoff - but with all the horror stories, it's hard not to be <cough>concerned</cough> to say the least!

Anyone have thoughts on a legitimate reason this might be happening, before I go in there and let someone have a piece of my mind tomorrow (albeit sanely)? Thanks in advance.

UCF w00t · 05-09-2009, 12:22 AM

its probably automated. nothing to worry about.i

it appears that the chevy site wont work until the car has been invoiced. your dealer can see it once its built.

Number_9 · 05-09-2009, 12:25 AM

Quote:

Originally Posted by UCF w00t

its probably automated. nothing to worry about.i

it appears that the chevy site wont work until the car has been invoiced. your dealer can see it once its built.

Of the two or three people on this forum that could have replied and set my mind at ease, at least until I talk nicely with the dealer tomorrow, you're one of them UCF.

Thanks for taking the time to reply.

3 SS's · 05-09-2009, 08:53 AM

Quote:

Originally Posted by Number_9

With factory actually meaning the car may be transported to Whitby, Ontario (down the road) to have the stripes applied.. then shipped back to the plant in Oshawa

Has anyone been able to determine the turnaround time on this yet??

Number_9 · 05-09-2009, 09:25 AM

Quote:

Originally Posted by 3 SS's

Has anyone been able to determine the turnaround time on this yet??

I am working on that! Haha.. The name of the place that does the stripes, in the event your car was sent out, is on the right hand side of the window sticker. I won't name them here, but I plan to ask them what their turnaround time is, as well as any other information they can/will share.

I called them too late on Friday, they were already closed, so I'll try again on Monday. If I am able to find anything out, I'll share it here.

Number_9 · 05-09-2009, 09:51 AM

Quote:

Originally Posted by UCF w00t

its probably automated. nothing to worry about.

Okay, so I talked to the Dealership this morning. Looks like they are using my car as bait, along with a couple of others, just to be able to list cars on their website, etc. Can't say that I am a fan of that practice,

, but we confirmed that my car is in fact my car, and that the heart palpitations I experienced last night can subside today.

Upside is he printed out my event codes status/dates, so I'll be swinging by to pick that up today.... another item for the scrap book. Right now, my status remains at 4B00 - Bayed, no doubt while they work to address the recall on the starter cable (I've confirmed my VIN is on that list).

Thanks again for your reply last night, UCF.

JJ2010 · 05-09-2009, 09:58 AM

Quote:

Originally Posted by Number_9

Okay, so I talked to the Dealership this morning. Looks like they are using my car as bait, along with a couple of others, just to be able to list cars on their website, etc. Can't say that I am a fan of that practice,

, but we confirmed that my car is in fact my car, and that the heart palpitations I experienced last night can subside today.

Upside is he printed out my event codes status/dates, so I'll be swinging by to pick that up today.... another item for the scrap book. Right now, my status remains at 4B00 - Bayed, no doubt while they work to address the recall on the starter cable (I've confirmed my VIN is on that list).

Thanks again for your reply last night, UCF.

How did you find out if yours was on the list???

Mine is 6886 and I can't get any info on it...

It was built May 1st....

Number_9 · 05-09-2009, 10:03 AM

Quote:

Originally Posted by JJ2010

How did you find out if yours was on the list???

Yes and no. Yes, in that someone on this forum has the list (or at least visibility into the list) and reached out to me via PM. No, in that I promised not to reveal my source less he/she/they get bombarded by messages and requests.

2010 SS RS · 05-09-2009, 10:14 AM

My fresh new baby boy has been born. I got to get the cigars and call my friends.

Number_9 · 05-09-2009, 10:17 AM

Quote:

Originally Posted by 2010 SS RS

My fresh new baby boy has been born. I got to get the cigars and call my friends.

05-08-2009, 10:26 PM	#2717
spi Drives: 2010 Black 2SS Join Date: Feb 2009 Location: Pittsburg, KS/ Joplin, MO Posts: 414 View My Garage	Got my VIN today 6637 __________________ 2010 CAMARO 2SS ORDERED OCT. 13,2008 DELIVERED JUNE 2, 2009 VIN# 2G1FK1EJ0A9106637

05-08-2009, 11:59 PM	#2720
edog Drives: 2010 2SS/RS IOM Join Date: Oct 2008 Location: F'BURG VA Posts: 3,832 View My Garage	http://wwww23.chevrolet.com/tools/wi...=YOUR_VIN_HERE I used this link but nothing comes up. I placed my vin where it stated...Still no results. Any clue? __________________ Update...Build in process, Forged Rods, Pistons and rings, Johnson Lifters, NOVI1500 ECS SC, 13lb boost or more, LS3 Conversion 114/228/241 COMP CAM, Frostbite 4 row Aluminum radiator, 6L80 built, Circle D 6L80 PRO SERIES MULTI 258MM 2D, Stock 3.45 gears, 1-7/8 American Racing Headers w/HF cat, X-Pipe, Lingenfelter dual fuel pump, E-85 flex sensor, ATI super damper pulley, Ported TB, 160 therm, Trans cooler, Pedder's sways/end links/sub frame bushings, BMR trailing arms & toe rods, Coil overs. HP/TQ pending

05-09-2009, 12:13 AM	#2721
Number_9 Drives: 2010 2SS/RS L99 Join Date: Mar 2009 Location: Trophy Club, TX Posts: 1,464 View My Garage	Guys (and Gals) - I just Google'd my VIN... my dealer actually has my car listed on their website.... the picture isn't right but the details and the VIN sure are. It's really freaking me out, so much for getting any sleep tonight. Check this out!! http://www.classicchevytx.com/VehicleDetails/408112453 Man, are they gonna get a phone call first thing in the morning... if I don't just wake up and drive over so I am there when the doors open! It's not on the lot, that I know, but what the heck! I ordered from Classic Chevrolet in Grapevine because they have a really good reputation - fBodFather was even there this past week for the 5/6 kickoff - but with all the horror stories, it's hard not to be <cough>concerned</cough> to say the least! Anyone have thoughts on a legitimate reason this might be happening, before I go in there and let someone have a piece of my mind tomorrow (albeit sanely)? Thanks in advance. __________________

05-09-2009, 10:14 AM	#2729
2010 SS RS Drives: 2010 2SS/RS IBM Black Polished Join Date: Feb 2009 Location: Colorado Posts: 2,106	VIN 8874 has been born! My fresh new baby boy has been born. I got to get the cigars and call my friends. __________________ 418 Stroker, 621RWHP 648 lbs TORQUE Built by Laramie GM Auto Center Tuned by Nick at Mac Autosport. EForce SC, 2 3/4pulley,LPE dual fuel pump, JRE Twin fuel rail upgrade, posi clutch kit, RX oilcatch can and breather, Callies Compstar crankshaft and rods, Racing bearings, CP -13.8 race pistons, steel rings, Comp Cams X6 blower cam, Springs, HD timing chain and tensioner, Doug Thorley Tri Y LT headers, 89.7lb injectors, RPM rollbar, DSS1400 shafts, Simpson 5 pt harness, BMR Toe rods and trailing arms, led lights, RPM input and output shafts

05-09-2009, 12:22 AM	#2722
UCF w00t Geek Drives: IOM 2010 Camaro 2SS Join Date: Oct 2008 Location: Orlando Posts: 4,451	its probably automated. nothing to worry about.i it appears that the chevy site wont work until the car has been invoiced. your dealer can see it once its built.