05-11-2009, 07:20 AM | #1 |
Custom User Title
Drives: Fast Join Date: Jan 2009
Location: San Diego, CA
Posts: 550
|
super/turbo for DD
I'm taking a different look at this, I know quite a few of you are taking yours to the track on the weekend(every month or so for me), some of you are going to look for some 'stangs on the street. But what about those of use who aren't allowed to get the Camaro and our wifes get them?
She won't be able to handle 500+HP to the wheels, so i'm definitely not getting her the S/C, unless it can be turned on/off, and I'm not thinking that's possible. I'm thinking of doing the twin-turbo from APS if/when they come out with one, so the HP is in the high RPM range, isn't that correct? I've dealt with S/C on an old 350 before, but none of this newer technology. This is definitely not a which 1 is better, it's which 1 do you think would suit my wife better? |
05-11-2009, 07:53 AM | #2 |
Account Suspended
|
I would say the turbo would be less touchy on the street in the low rpm range.
|
05-11-2009, 07:54 AM | #3 |
Drives: Rust bucket and a jalopy Join Date: May 2009
Location: Central florida
Posts: 52
|
Unless she can handle high horsepower, just get her an intake and exhaust. It'll boost the power and sound of her car.
Both turbo and supercharging will give a lot of power that might potentially give her more then she can handle. |
05-11-2009, 08:12 AM | #4 |
Okie doke
|
It really all depends on the application. For the roots (Eaton) style that was in my 04 cobra, if you didn't get into it, you weren't into boost .... Also todays turbochargers can spool up pretty quick (not as instant, but you would be suprised .. it isn't all on the top end unless you build it that way).
Crowley
__________________
|
05-11-2009, 08:27 AM | #5 |
SST...
Drives: SST Camaro 2010 Join Date: Oct 2008
Location: East Coast of Florida
Posts: 5,927
|
I guess the first question is: If your wife can't handle it, why are you risking putting her in danger if she pushed the pedal too far? If you only want the extra power when YOU drive it, you can control output with a throttle stop or add nitrous to satisfy your immediate need for speed.
|
05-11-2009, 08:35 AM | #6 |
Drives: 96 Bronco w/ a 5 speed Join Date: Mar 2007
Location: PNW
Posts: 296
|
Maybe your installer/tuner could come up with a "valet mode" that holds the waste gates wide open.
But I think speedster is right that nitrous might be the way to go in your situation. |
05-11-2009, 08:10 PM | #7 | |
Custom User Title
Drives: Fast Join Date: Jan 2009
Location: San Diego, CA
Posts: 550
|
Quote:
|
|
05-11-2009, 08:56 PM | #8 | |||
Truth Enforcer
Drives: anything I can get my hands on Join Date: Sep 2006
Location: anywhere and everywhere
Posts: 22,797
|
Quote:
__________________
Never race anything you can't afford to light on fire and push off a cliff
A group as a whole tends to be smarter than the smartest person in that group until one jackass convinces everyone otherwise. Quote:
Quote:
|
|||
05-11-2009, 09:22 PM | #9 | |
SST...
Drives: SST Camaro 2010 Join Date: Oct 2008
Location: East Coast of Florida
Posts: 5,927
|
Quote:
Programmers: Someone will make a programmer that can have two or more preset modes to control the LS3/L99 ECM. Just a matter of when. Diesels do it right now. Throttle Stops: Dedenbear make some really cool controllable throttle stops (even two stage) so you could always go that route. Nitrous: Easy to control either by the valve (just on/off) or a sequential controller. Turbos: The lowest you can reasonably REGULATE turbos is down around 3.5 psi. Below that they usually have some level of boost creep, but that's pretty low boost. Superchargers: Other than Spike's "Mad Max" version you can't really disable a supercharger short of pulling the belt off. ATI makes a clutched blower 'Superpulley', but that only is for freewheeling in one direction NOT on-off. One possible alternative is a blower with a SEPARATE 6 to 12 rib serpentine belt (as opposed to the cogged belt most people associate with a blower). That belt can be installed or removed in about 30 seconds with just a 3/4" open end wrench. [One note about this if the blower has a bypass valve, no sweat, if it doesn't, you will have a very noticeable loss of power without the blower belt on] Just some more possibilities to contemplate. Enjoy yourself either way and keep your wife safe !!! Last edited by speedster; 05-11-2009 at 09:33 PM. |
|
05-11-2009, 09:29 PM | #10 | |
Blessed
Drives: 2013 Sonic RS MT Join Date: Dec 2007
Location: Saint Augustine FL
Posts: 28,444
|
Quote:
If you want the car to have more power but not "get away from you" power then I'd stick to some less costly bolt-ons and leave it at that. However if you have to go FI, then a single turbo set up will be more tame than a supercharger. Not by much though.
__________________
Click image to see build thread. PQ - "the love of cars. It's a boys first step toward manhood and a mans last hold on boyhood." Fbodfather - "We do not want to use the Z28 moniker on a car that does not deserve this hallowed name." The_Blur - "Let's not confuse competitors with equals." |
|
05-12-2009, 11:48 AM | #11 |
Drives: My wife crazy with my C5 usage. Join Date: Apr 2009
Location: DFW
Posts: 6,558
|
If you go with a mild amount of boost, and your wife is somewhat responsible, either should be fine. You can get a smaller pulley for a S/C or a small volume turbo and only go with 6 psi of boost, make good gains in power and not snap her neck if she were to inadvertantly get on it passing someone on the freeway.
Twin Turbo's would not be the way to go. Most TT setups are designed to get power from over idle to WOT. A single turbo or S/C with a small pulley would be fine IMO.
__________________
UNDER CONSTRUCTION......again......
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
GMPP super/turbo kit | Caliman93230 | Forced Induction - V8 | 24 | 10-11-2008 08:09 AM |