Adding a ZL1 front end to your car. - Page 160 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

2SSRS@Gen5diy · 04-10-2012, 03:43 PM

Quote:

Originally Posted by jsharp

Nope cause one of them is mine! All mine!

And it going to be here in the AM.

GbrilliantQ · 04-10-2012, 03:59 PM

Ugh. I want that hood....

Sent from my Galaxy Note

jsharp · 04-10-2012, 05:12 PM

Sweet!

orangejuice · 04-10-2012, 06:56 PM

Quote:

Originally Posted by jsharp

Nope cause one of them is mine! All mine!

Same here! Can't wait! Just need my parts guy to return my damn call so I can get my hood LOL

MValdez17 · 04-10-2012, 07:45 PM

Quote:

Originally Posted by orangejuice

Same here! Can't wait! Just need my parts guy to return my damn call so I can get my hood LOL

Good luck with that. They canceled my order for my hood telling me I need to have a VIN that is registered in my state.
Im tired of waiting.

You will probably have better luck since your in MI...

jsharp · 04-10-2012, 08:33 PM

Gm jsharp says u got punked lol! Couldnt keep me from getting my parts!

orangejuice · 04-10-2012, 08:43 PM

Quote:

Originally Posted by MValdez17

Good luck with that. They canceled my order for my hood telling me I need to have a VIN that is registered in my state.
Im tired of waiting.

You will probably have better luck since your in MI...

My insert is on the way!

Mach · 04-10-2012, 11:57 PM

Got some 25 dollar H11 LED Blubs and Sockets.... Spliced them into the sidemarkers... and... Drumroll....

I used my factory harness for my ZL1 swap. So now when the sidmarkers come on so do the Fogs. No crazy harnesses necessary.

s1k0 · 04-11-2012, 03:42 AM

Oh man, saving some cash to blow it out on all of these mods!

Might be another 4 months without mods! This is killing me!

Revo1 · 04-11-2012, 04:17 AM

Looks good Mach

flyman3 · 04-11-2012, 01:07 PM

Can anybody give me the dimesions of the light ports? Trying to make something work. Also where is everybody getting these the cheapest?

2SSRS@Gen5diy · 04-11-2012, 03:51 PM

I have a new insert, its black but i dont want to open it till i get the green light as its not my part any more.

kbui · 04-11-2012, 04:14 PM

Ofer and Ray, when are you guys going to have a fitting of this hood/insert on a maggie done? Did I missed it?

2SSRS@Gen5diy · 04-11-2012, 04:27 PM

Ray is getting his insert some time in the next 20 Hr then with luck he can mount his 2300 on the car and test fit.

04-10-2012, 05:12 PM	#2229
jsharp NOW CAMMED & SUPERCHARGED Drives: 2010 Camaro 2SS/RS Black w/ IOM Join Date: Oct 2008 Location: Ar Posts: 2,336	Sweet! __________________ Livernois Motorsports: Maggie 2300 7psi, Livernois 2C cam/L99 to LS3 Conversion, Ported TB, Rotofab w/adm race scoop, adm trans cooler,Kooks headers no cats, Kooks 3" exhaust. METCO breather. Precision 2400 Vigilante TC. Eibach Lowering Springs & Swaybars. BMR Trailing arms, BMR Rear Cradle Bushings, BMR Toe Rods, BMR Differential bushings. Vossen CV3 20's w/ 305 Mickey Thompson @25psi. Zl1 front bumper. OE Zl1 Hood and matte black insert. 556RWHP/500RWTQ L99

04-10-2012, 08:33 PM	#2232
jsharp NOW CAMMED & SUPERCHARGED Drives: 2010 Camaro 2SS/RS Black w/ IOM Join Date: Oct 2008 Location: Ar Posts: 2,336	Gm jsharp says u got punked lol! Couldnt keep me from getting my parts! __________________ Livernois Motorsports: Maggie 2300 7psi, Livernois 2C cam/L99 to LS3 Conversion, Ported TB, Rotofab w/adm race scoop, adm trans cooler,Kooks headers no cats, Kooks 3" exhaust. METCO breather. Precision 2400 Vigilante TC. Eibach Lowering Springs & Swaybars. BMR Trailing arms, BMR Rear Cradle Bushings, BMR Toe Rods, BMR Differential bushings. Vossen CV3 20's w/ 305 Mickey Thompson @25psi. Zl1 front bumper. OE Zl1 Hood and matte black insert. 556RWHP/500RWTQ L99

04-10-2012, 11:57 PM	#2234
Mach Drives: White M6 1LT RS Join Date: Mar 2010 Location: Canton, MI Posts: 1,676	Got some 25 dollar H11 LED Blubs and Sockets.... Spliced them into the sidemarkers... and... Drumroll.... I used my factory harness for my ZL1 swap. So now when the sidmarkers come on so do the Fogs. No crazy harnesses necessary. __________________ Pfadt Sway Bars - FE3 Suspension - Barton Shifter - IdealG's Clutch Master Cylinder - Trifecta - Vmax TB - Vararam Intake - MACE 25mm Insulator - Plenum Insulator - Ported/Gasket Matched Intake Manifold - Rx Catchcan - AAC DRL's - 4 Pack Aux Gauges - Steering Controls - AAC Afterburners - DIY Led Sidemarkers - ZL1 Front End Next mod: Done!

04-11-2012, 03:42 AM	#2235
s1k0 Drives: Corvette C6 Join Date: Jun 2011 Location: SoCal San Diego Posts: 1,225 View My Garage	Oh man, saving some cash to blow it out on all of these mods! Might be another 4 months without mods! This is killing me! __________________ ....Oh yeah and A CIA Inc. Sold It..

04-11-2012, 04:17 AM	#2236
Revo1 Don't Like it? Suggit. Drives: 2010 2SS/RS Join Date: Aug 2008 Location: Fresno, CA Posts: 14,832 View My Garage	Looks good Mach __________________ "Tops off, tach up baby- loud and proud!" A Camaro lover from day one- 1996 3.8 V6 Camaro, to 1996 5.7 LT1 Camaro Z28, to the sold 2002 5.7 LS1 Camaro SS, and NOW, a [I]6.2 L99 VR 2SS/RS: XS Power stainless full exhaust, Airaid CAI, BMR drop springs and sways, custom tune by Cal Speed- 411rwhp

04-10-2012, 03:59 PM	#2228
GbrilliantQ ¡ʇuɐıןןıɹq Drives: 2011 Camaro IOM 2SS/RS Join Date: Dec 2010 Location: Decatur, Illinois Posts: 2,600	Ugh. I want that hood.... Sent from my Galaxy Note

04-11-2012, 01:07 PM	#2237
flyman3 Drives: 2010 CGM 2SS/RS Join Date: May 2010 Location: Greenwood, IN Posts: 253	Can anybody give me the dimesions of the light ports? Trying to make something work. Also where is everybody getting these the cheapest? __________________ Mods so far: 20% tint, Solo Mach X Exhaust, Custom Hockey Stick Stripes from MPD1, RevXtreme Catch Can, 6.2L emblems from Emblempros, Stealth turn signal bulbs, Skip Shift Eliminator from Apex-Speed, MPD1 Spoiler, custom painted Sparks SS emblems by MPD, MPD Force 5 hood, custom painted ZL1 bumper by MPD, MPD smooth rear panel, C.A.I. intake to seal with hood, ARH 1 7'8" headers with Hi-flow cats, ceramic brake pads, Factory Reproductions Style 41 black ZL1 wheels, Painted calipers to match stripes, ADM ZL1 scoop, showstopper markers, Norris custom cam, Tuned by Mike Norris 464 HP, 425 TQ.

04-11-2012, 03:51 PM	#2238
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,728 View My Garage	I have a new insert, its black but i dont want to open it till i get the green light as its not my part any more.

04-11-2012, 04:14 PM	#2239
kbui Drives: 85 Vette, 07 Escalade ESV, 03 GMC, Join Date: Nov 2009 Location: Austin, TX Posts: 927 View My Garage	Ofer and Ray, when are you guys going to have a fitting of this hood/insert on a maggie done? Did I missed it? __________________ ADM Performance installed and tuned: Maggie, Stainless Works Power LTs, ADM race cai, ADM ZL1 scoop Whiteside Customs Super Street 2 Package w/ coilovers BC Racing Coilovers and lowered, Whiteline Bushings & Swaybars MBRP catback exhaust, ZL1 bumper conversion, Drake billet shifter, Hurst paddles, NLP rear spoiler, OEM GFX, Vis Racing hood, ASA GT5 wheels

04-11-2012, 04:27 PM	#2240
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,728 View My Garage	Ray is getting his insert some time in the next 20 Hr then with luck he can mount his 2300 on the car and test fit.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CAMARO WIKI	Tran	Wiki	67	11-27-2024 09:02 AM
Gran Turismo 5 November 24th, 2010	Nezacant	Gaming Lounge	562	04-21-2011 10:23 PM
Winner, winner - Jalopnik compares the Big 3	Number 3	5th Gen Camaro SS LS LT General Discussions	31	04-17-2011 04:24 PM
Pedders Suspension Benchmark Track Testing and New Jersey Track Day	Info@PeddersUSA.com	USA - NY / NJ / PA	35	10-26-2009 06:20 PM
#4768 - Delivered and Made Ready the Right Way!	Number_9	5th Gen Camaro SS LS LT General Discussions	62	07-16-2009 03:42 AM