IPS Twin Turbo, 427 LSX, 4L80 transmission, DSS 9" kit - Page 18 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

SSBUSDRVR · 04-02-2012, 07:59 AM

Quote:

It's just been rewrapped in much nicer leather.

I have one from ACE that is a bit thicker and flat on the bottom. But, I wanted to go back to the stock look.

Thanks. Yeah like the look of the stock wheel here too just wish it was a bit thicker.

Darth_Emma · 04-15-2012, 09:41 AM

Quote:

Originally Posted by Protomanx8

I just spent an hour reading every post... And all I have is one question ......are you single?

hehe. Nope. My husband is not the least bit interested in my car though.

xx_ED_xx · 04-15-2012, 03:32 PM

What the hell is he interested in?

Darth_Emma · 04-15-2012, 05:06 PM

Quote:

Originally Posted by xx_ED_xx

What the hell is he interested in?

History of various sorts mostly.

xx_ED_xx · 04-15-2012, 09:46 PM

It tends to repeat itself...

Darth_Emma · 04-16-2012, 10:13 AM

I have an update...

I just talked to Brandon at IPS. The car is back from the chassis shop and the cage is done. They will be taking it to the paint shop today or tomorrow to have the cage painted.

The intake manifold has arrived from Hogan.

I'll try to get to IPS today or tomorrow to get some pictures.

Jeremy@HOB · 04-16-2012, 01:11 PM

Awesome build! That thing is going to scream once IPS is finished with it.

Darth_Emma · 04-16-2012, 05:33 PM

Here are some pics I took today of the cage. It goes to the paint shop on Friday to have the cage painted CGM to match the car.

This next one is a little hard to see the perspective. You are looking down through the windshield at the tube that goes to the floor on the driver's side. The weld point is where the dead pedal was.

Darth_Emma · 04-16-2012, 05:34 PM

Hogan intake manifold. I am having IPS polish it to a high shine.

pyr0b0y · 04-16-2012, 05:42 PM

that intake...........

Dznts · 04-16-2012, 06:21 PM

Quote:

Originally Posted by pyr0b0y

that intake...........

+1

Smirnoff · 04-16-2012, 08:45 PM

Thanks for posting - nice job on the cage!!!

RubyCamaro · 04-16-2012, 10:59 PM

Dayuum! That thing is truly going to be a sight to behold, watch & hear!

solobaric · 06-24-2012, 12:00 PM

Any final pics of the turbo setup?

04-16-2012, 05:42 PM	#248
pyr0b0y need....more....hp Drives: The Neighbor Hater Join Date: Dec 2010 Location: San Mateo, CA Posts: 4,091	that intake........... __________________ BUILD THREAD BUILT AND MAINTAINED BY BLU808 Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims

04-16-2012, 08:45 PM	#250
Smirnoff Drives: Camaro SS Join Date: Mar 2010 Location: Motorcity Dragway Posts: 978	Thanks for posting - nice job on the cage!!! __________________ 11.90's w/headers, CAI, custom tune, slicks/skinnys, shifter & 100+ Ethyl.

04-16-2012, 10:59 PM	#251
RubyCamaro Jan Drives: 2010 Camaro 1LT Red Jewel tintcoat Join Date: May 2010 Location: Springfield, TN Posts: 16,241 View My Garage	Dayuum! That thing is truly going to be a sight to behold, watch & hear! __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Video: 1000hp+/1000tq+ HPE1000 427 Twin Turbo Camaro	Hennessey Performance	Camaro Photos \| Spyshots \| Video \| Media Gallery	106	03-05-2012 08:35 PM
Just ordered my twin Turbo Kit Today	Blkcamaro757	Forced Induction - V8	114	09-28-2010 10:22 AM
4th Annual GM Performance Parts LSX Shootout!!	nmcajeff	Dragstrip and Launch Techniques Discussion	3	07-30-2010 01:05 PM
ULTIMATE PERFORMANCE* TURBO Camaro SS -- 750hp Custom Single Turbo Kit (T04Z)	Ultimate Performance	Forced Induction - V8	496	10-11-2009 02:29 PM

04-15-2012, 03:32 PM	#241
xx_ED_xx Drives: 04 Silverado Join Date: Jun 2010 Location: Floriduh! Posts: 1,113	What the hell is he interested in?

04-15-2012, 09:46 PM	#243
xx_ED_xx Drives: 04 Silverado Join Date: Jun 2010 Location: Floriduh! Posts: 1,113	It tends to repeat itself...

04-16-2012, 10:13 AM	#244
Darth_Emma Psssssssssshhhhhhhhhhhhh! Drives: under contruction Join Date: Nov 2009 Location: Marysville, Ohio Posts: 12,996 View My Garage	I have an update... I just talked to Brandon at IPS. The car is back from the chassis shop and the cage is done. They will be taking it to the paint shop today or tomorrow to have the cage painted. The intake manifold has arrived from Hogan. I'll try to get to IPS today or tomorrow to get some pictures.

04-16-2012, 01:11 PM	#245
Jeremy@HOB Drives: 2010 Camaro SS Join Date: Mar 2010 Location: Lenexa, KS Posts: 74	Awesome build! That thing is going to scream once IPS is finished with it.

04-16-2012, 05:33 PM	#246
Darth_Emma Psssssssssshhhhhhhhhhhhh! Drives: under contruction Join Date: Nov 2009 Location: Marysville, Ohio Posts: 12,996 View My Garage	Here are some pics I took today of the cage. It goes to the paint shop on Friday to have the cage painted CGM to match the car. This next one is a little hard to see the perspective. You are looking down through the windshield at the tube that goes to the floor on the driver's side. The weld point is where the dead pedal was.

04-16-2012, 05:34 PM	#247
Darth_Emma Psssssssssshhhhhhhhhhhhh! Drives: under contruction Join Date: Nov 2009 Location: Marysville, Ohio Posts: 12,996 View My Garage	Hogan intake manifold. I am having IPS polish it to a high shine.

06-24-2012, 12:00 PM	#252
solobaric Drives: 2002 Camaro SS Join Date: Jun 2012 Location: Evansville, Indiana Posts: 526	Any final pics of the turbo setup?