OHIO CAMARO ENTHUSIASTS/OWNERS REPORT HERE - Page 707 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

driyac · 04-17-2012, 02:36 AM

Quote:

Originally Posted by ChriSS84

It could be worse. The Browns come to mind....

Im a steelers fan..

velociSSimo · 04-17-2012, 05:10 AM

Quote:

Originally Posted by ChriSS84

It could be worse. The Browns come to mind....

IROCanSS · 04-17-2012, 05:22 AM

Quote:

Originally Posted by driyac

Im a steelers fan..

Sorry bout that.

ChriSS84 · 04-17-2012, 06:50 AM

Quote:

Originally Posted by velociSSimo

Haha I figured I would get a couple peoples attention with that one. The truth hurts. I can say that because I root for a team that hasn't done anything since I was a small child.

ChriSS84 · 04-17-2012, 07:05 AM

Quote:

Originally Posted by driyac

Im a steelers fan..

Pretty much how I feel whenever anyone starts bragging to me about things that don't matter and things that I don't care about.

Cool story.

Name: 422440_10150627177142600_653842599_9240701_346622931_n.jpg
Views: 227
Size: 43.7 KB

Name: 422440_10150627177142600_653842599_9240701_346622931_n.jpg
Views: 227
Size: 43.7 KB

vthokiefan · 04-17-2012, 10:38 AM

http://www.nationalmuseum.af.mil/new...p?id=123295982

Just thought I'd let people know about this. It's pretty cool especially if you like WWII era stuff.

April 17 - Static Display at Airfield behind USAF Museum
April 18 - 1215 One-by-one take off and 1300 fly-over

vthokiefan · 04-17-2012, 10:43 AM

On a different note... does anyone have any recommendations of a reputable place to get an alignment done on a lowered car around springboro/centerville area? I was considering scheduling at the dealer (Voss) but didn't want them to give me any crap over it. I will be installing my springs and should be able to do the bushing timing myself, but if not I'd like the shop to be able to do it (and know what it is!). \

There's a Tire Discounters on 73 and a Grismer on 741 near 73 but I'm not sure if they do decent work... any input would be appreciated

IROCanSS · 04-17-2012, 11:10 AM

Call Larry Mallott at McCluskey Chevrolet Service. He did mine. He builds SCCA race Corvettes. He is the man. It's at kings auto mall near Mason.

He will give you whatever specs you want. It's not a computer alignment. He will set it to whatever you like and give you guidance. I have negative 1 degree toe in all corners. It handles great but doesn't eat up tire shoulders.

Most spring manufactures give specs but you can set them at whatever you want. Call Larry.

gahammerle · 04-17-2012, 11:12 AM

Quote:

Originally Posted by vthokiefan

On a different note... does anyone have any recommendations of a reputable place to get an alignment done on a lowered car around springboro/centerville area? I was considering scheduling at the dealer (Voss) but didn't want them to give me any crap over it. I will be installing my springs and should be able to do the bushing timing myself, but if not I'd like the shop to be able to do it (and know what it is!). \

There's a Tire Discounters on 73 and a Grismer on 741 near 73 but I'm not sure if they do decent work... any input would be appreciated

I took mine to Walt Luti in Lebanon. Brought in the specs sheet with recommended settings from a C5 vendor. They were able to get it as close to the specs as possible without buying the extra bolts that allow you greater range. The owner has a Vette that he has tracked, so he is interested in performance. Plus, it was only like $70. I noticed an improvement in handling afterwards.

I timed the bushings before I took it in, so I'm not sure if they know about it, but I suspect they do. If not, just print out the sheet with all the bolts that need to be loosened and i have no doubt they would do a good job.

That was 11,000 miles ago and tire wear is still even.

driyac · 04-17-2012, 11:36 AM

Quote:

Originally Posted by IROCanSS

Call Larry Mallott at McCluskey Chevrolet Service. He did mine. He builds SCCA race Corvettes. He is the man. It's at kings auto mall near Mason.

He will give you whatever specs you want. It's not a computer alignment. He will set it to whatever you like and give you guidance. I have negative 1 degree toe in all corners. It handles great but doesn't eat up tire shoulders.

Most spring manufactures give specs but you can set them at whatever you want. Call Larry.

So your a mccluskey Chevy guy?

driyac · 04-17-2012, 11:39 AM

Quote:

Originally Posted by ChriSS84

Pretty much how I feel whenever anyone starts bragging to me about things that don't matter and things that I don't care about.

Cool story.

Attachment 359721

Cool burn bro.

ChriSS84 · 04-17-2012, 11:59 AM

Quote:

Originally Posted by driyac

Cool burn bro.

Just messin with you.

ChriSS84 · 04-17-2012, 12:01 PM

Quote:

Originally Posted by IROCanSS

Call Larry Mallott at McCluskey Chevrolet Service. He did mine. He builds SCCA race Corvettes. He is the man. It's at kings auto mall near Mason.

He will give you whatever specs you want. It's not a computer alignment. He will set it to whatever you like and give you guidance. I have negative 1 degree toe in all corners. It handles great but doesn't eat up tire shoulders.

Most spring manufactures give specs but you can set them at whatever you want. Call Larry.

Larry did mine as well and he's great. I'm going back to him when I get back.

driyac · 04-17-2012, 12:03 PM

Quote:

Originally Posted by ChriSS84

Larry did mine as well and he's great. I'm going back to him when I get back.

Larry fixed the curbing on a rim for my silverado. He did an immaculate job.

04-17-2012, 10:38 AM	#9890
vthokiefan Stealthy SS Drives: 2011 CGM 2SS/RS w Black Stripes Join Date: Jun 2011 Location: Springboro, OH Posts: 123	http://www.nationalmuseum.af.mil/new...p?id=123295982 Just thought I'd let people know about this. It's pretty cool especially if you like WWII era stuff. April 17 - Static Display at Airfield behind USAF Museum April 18 - 1215 One-by-one take off and 1300 fly-over __________________ 2011 2SS/RS A6 CGM w Black Stripes 3M Clear Bra, GM Strong MAF, Borla S-Type Axle-back, RX Catch Can, Pedders: Xa Coilovers, Sub-Frame / Radius Rod Inserts, BMR: Front & Rear sway bars / End links & RLCA plates, Defenderworx black bowties

04-17-2012, 10:43 AM	#9891
vthokiefan Stealthy SS Drives: 2011 CGM 2SS/RS w Black Stripes Join Date: Jun 2011 Location: Springboro, OH Posts: 123	On a different note... does anyone have any recommendations of a reputable place to get an alignment done on a lowered car around springboro/centerville area? I was considering scheduling at the dealer (Voss) but didn't want them to give me any crap over it. I will be installing my springs and should be able to do the bushing timing myself, but if not I'd like the shop to be able to do it (and know what it is!). \ There's a Tire Discounters on 73 and a Grismer on 741 near 73 but I'm not sure if they do decent work... any input would be appreciated __________________ 2011 2SS/RS A6 CGM w Black Stripes 3M Clear Bra, GM Strong MAF, Borla S-Type Axle-back, RX Catch Can, Pedders: Xa Coilovers, Sub-Frame / Radius Rod Inserts, BMR: Front & Rear sway bars / End links & RLCA plates, Defenderworx black bowties

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Songs About Camaros (for your driving pleasure)	Emjay	5th Gen Camaro SS LS LT General Discussions	74	12-18-2014 01:42 AM
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 08:33 PM
CNN: Camaro: From sketchpad to street - The rebirth of a muscle car ...	Gatecrasher	5th Gen Camaro SS LS LT General Discussions	49	10-05-2009 04:33 PM
UPCOMING CAMARO IMPORTANT DATES	CamaroScotty	5th Gen Camaro SS LS LT General Discussions	125	01-11-2009 01:31 AM
Camaro Accessories from SEMA	FenwickHockey65	5th Gen Camaro SS LS LT General Discussions	1	11-03-2008 03:25 PM

04-17-2012, 11:10 AM	#9892
IROCanSS Account Suspended Drives: 89 IROC 350 Join Date: Mar 2009 Location: Back roads, southern Ohio Posts: 12,504 View My Garage	Call Larry Mallott at McCluskey Chevrolet Service. He did mine. He builds SCCA race Corvettes. He is the man. It's at kings auto mall near Mason. He will give you whatever specs you want. It's not a computer alignment. He will set it to whatever you like and give you guidance. I have negative 1 degree toe in all corners. It handles great but doesn't eat up tire shoulders. Most spring manufactures give specs but you can set them at whatever you want. Call Larry.