!!!OFFICIAL!!! SoCal Head Turners thread - Page 593 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

AKAviking14 · 04-18-2012, 08:57 PM

Quote:

Originally Posted by SS-Devil

Im up north too so for the meet up let me know, I just don't know how id have time to wash my car, I have to go to malibu hills the night before which is dusty but Im very down. and ITS CLOSE!!! need more like these in the SFV!

Just make it happen

AKAviking14 · 04-18-2012, 08:58 PM

Quote:

Originally Posted by Chito

Yes don't wait, get it and if you need help with the install let me know I can install it for you.

Oh yeah? Alright man I'll let you know. Thanks I really appreciate it

SS-Devil · 04-18-2012, 08:59 PM

Oh, Im gonna make it, shine or dusty.

if its a little dusty, take the microfiber clothe in my trunk and run it around.

TCAT · 04-18-2012, 09:23 PM

Quote:

Originally Posted by SS-Devil

Oh, Im gonna make it, shine or dusty.

if its a little dusty, take the microfiber clothe in my trunk and run it around.

Spray some detail spray on that cloth and you're good to go. As long as your car isn't caked with dust then it should be safe to run the cloth per it with spray. If its to much dirt, then rubbing it around on the paint will cause to many swirl marks. Even if your car came dirty it would still look and sound amazing!! Let's meet regardless

.

SS-Devil · 04-18-2012, 09:24 PM

Quote:

Originally Posted by TCAT

Spray some detail spray on that cloth and you're good to go. As long as your car isn't caked with dust then it should be safe to run the cloth per it with spray. If its to much dirt, then rubbing it around on the paint will cause to many swirl marks. Even if your car came dirty it would still look and sound amazing!! Let's meet regardless

.

For Sure then, Ill figure it out

TCAT · 04-18-2012, 10:58 PM

Hey guys,

At this weekends car show, I will be installing front and rear Chevy bowtie carbon fiber vinyl overlays for $15 total. I have White Carbon Fiber, and Black Carbon Fiber vinyl. It is fantastic quality vinyl, and looks amazing. It's made by Hexis USA, which is the same vinyl Headlight Armor sells. At the show I will cut out the bowtie, lay it on with a heat gun and make sure it looks great right at the show. The $15 price includes the front and rear bowtie AND installation cost. That's about as cheap as anyone can get. I'm not expecting to make much money off of this project because the carbon wrap is relatively expensive (even when I buy the large rolls that I do. I also have to cut off the leftover and throw it away which is money down the drain, lol). However, this will help pay for the wrap at least. I have no idea how many bowties I can do for the amount of vinyl I have left. So, no promises on the total number I can do. It will be first come, first served, so whoever replies first (whether that be in this thread or PMing me) gets first priority. Also, remember, this may take a tad bit more time (not much though) because they aren't precut, I will cut them out nicely after the vinyl is laid on.

Let me know if anybody wants this done. Hint Hint.....Carter...Chris....you guys just got new rides, so let's spruce them up

. This offer is good for anyone of our club members and other non club members, but ones that are Camaro5 members that meet us at the car show this weekend with their camaro. I thought this would be something fun to do at the show, and I know I was supposed to get Chito hooked up with some bowties at the last show.

Anyone interested?

AKAviking14 · 04-18-2012, 11:52 PM

Quote:

Originally Posted by TCAT

Hey guys,

At this weekends car show, I will be installing front and rear Chevy bowtie carbon fiber vinyl overlays for $15 total. I have White Carbon Fiber, and Black Carbon Fiber vinyl. It is fantastic quality vinyl, and looks amazing. It's made by Hexis USA, which is the same vinyl Headlight Armor sells. At the show I will cut out the bowtie, lay it on with a heat gun and make sure it looks great right at the show. The $15 price includes the front and rear bowtie AND installation cost. That's about as cheap as anyone can get. I'm not expecting to make much money off of this project because the carbon wrap is relatively expensive (even when I buy the large rolls that I do. I also have to cut off the leftover and throw it away which is money down the drain, lol). However, this will help pay for the wrap at least. I have no idea how many bowties I can do for the amount of vinyl I have left. So, no promises on the total number I can do. It will be first come, first served, so whoever replies first (whether that be in this thread or PMing me) gets first priority. Also, remember, this may take a tad bit more time (not much though) because they aren't precut, I will cut them out nicely after the vinyl is laid on.

Let me know if anybody wants this done. Hint Hint.....Carter...Chris....you guys just got new rides, so let's spruce them up

. This offer is good for anyone of our club members and other non club members, but ones that are Camaro5 members that meet us at the car show this weekend with their camaro. I thought this would be something fun to do at the show, and I know I was supposed to get Chito hooked up with some bowties at the last show.

Anyone interested?

I'm down for some white carbon fiber. I just want to see what it looks like. Is the vinyl durable?

TCAT · 04-19-2012, 12:03 AM

Hexis vinyl is definitely durable once it's on. Ask Felipe, as I put the same carbon on his gas door and bowties. I have the same type of carbon vinyl on my mirrors, dash trim, and door panels. Just clean it with some soap and water, and/or detail spray when it gets dirty.

Chito · 04-19-2012, 12:04 AM

Put me down for that tommy n hopefully u can work on the square exhaust tips from the gfx if there's time if not its cool no worries. Thanks.

TCAT · 04-19-2012, 12:06 AM

No problem Chito. I'll do your bowties first since I was supposed to do them last time. Thanks a ton man. Hopefully this helps out as well since we can have a mod day at the same time as the car show, lol. Now nobody will have to drive just to get them installed.

Chito · 04-19-2012, 12:52 AM

Thanks tommy.

AKAviking14 · 04-19-2012, 01:11 AM

Quote:

Originally Posted by TCAT

No problem Chito. I'll do your bowties first since I was supposed to do them last time. Thanks a ton man. Hopefully this helps out as well since we can have a mod day at the same time as the car show, lol. Now nobody will have to drive just to get them installed.

Creates incentive to go. I like it

TCAT · 04-19-2012, 01:21 AM

No problem guys! I'm glad to help. This should look bitchin on all your cars.

Missionboi · 04-19-2012, 01:57 AM

so....I love my daily drive aka my VW GTI....but am second guessing lol

I MIGHT be willing to sell whatever I have paid and transfer the name to the owner..

The NEW daily driver which I wanna buy instead of lease and just have is the
Ford Raptor SVT! It looks so bad ass and always wanted a truck...I have found a few and trying to manage some deals. What do you guys think?

04-18-2012, 08:59 PM	#8291
SS-Devil Drives: 2011 2SS/RS Devil Join Date: Mar 2012 Location: San Fernando Valley Posts: 64	Oh, Im gonna make it, shine or dusty. if its a little dusty, take the microfiber clothe in my trunk and run it around. __________________ Current Mods: 2SS/RS Full Ground Effects Dealer Package Dovetail Spoiler GTS Black Taillight Covers and Fog Light Covers Powdercoated Matte Black Wheels Matte Black Rear Light Bezel Black Chevy Bowtie Black Billet Grill Upper and Lower Full Interior Lighting Kit in Red DiabloSport Trinity Tuner Injen Cold Air Intake Resonator Delete Catalytic Converter Deletes Flowmaster 44 series mufflers Future Mods: Victory Red Door Panel Inserts and Trim Remote Control Hidden License Plate

04-19-2012, 12:04 AM	#8297
Chito SoCal HT5 Drives: 2010 Camaro black 2ss/rs Join Date: Jul 2010 Location: So CAL. Posts: 1,391 View My Garage	Put me down for that tommy n hopefully u can work on the square exhaust tips from the gfx if there's time if not its cool no worries. Thanks. __________________

04-19-2012, 12:52 AM	#8299
Chito SoCal HT5 Drives: 2010 Camaro black 2ss/rs Join Date: Jul 2010 Location: So CAL. Posts: 1,391 View My Garage	Thanks tommy. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Official Release Thread of the ******** 2010 Camaro Plug N Play RCA T-Harness	Steve@Subthump	Audio / Visual / Electronics/ Gauges / Nav	201	06-07-2011 09:06 PM
Official Camaro SL,UT C5FESTII Thread	SSOOCH	USA - Southwest	70	04-17-2011 11:47 PM
PWA "The Lounge"	DGthe3	Off-topic Discussions	143773	11-06-2010 12:00 PM
OFFICIAL Photo Thread from the SA Photoshoot 11-22-2009	CamaroSkooter	USA - Texas	39	12-09-2009 11:45 PM
Official $5999 Ultimate Performance Single Turbo kit for sale thread.	JTinFL	Forced Induction	30	10-21-2009 07:43 PM

04-18-2012, 10:58 PM	#8294
TCAT Drives: Has Wheels Join Date: May 2011 Location: On Earth Posts: 5,553	Hey guys, At this weekends car show, I will be installing front and rear Chevy bowtie carbon fiber vinyl overlays for $15 total. I have White Carbon Fiber, and Black Carbon Fiber vinyl. It is fantastic quality vinyl, and looks amazing. It's made by Hexis USA, which is the same vinyl Headlight Armor sells. At the show I will cut out the bowtie, lay it on with a heat gun and make sure it looks great right at the show. The $15 price includes the front and rear bowtie AND installation cost. That's about as cheap as anyone can get. I'm not expecting to make much money off of this project because the carbon wrap is relatively expensive (even when I buy the large rolls that I do. I also have to cut off the leftover and throw it away which is money down the drain, lol). However, this will help pay for the wrap at least. I have no idea how many bowties I can do for the amount of vinyl I have left. So, no promises on the total number I can do. It will be first come, first served, so whoever replies first (whether that be in this thread or PMing me) gets first priority. Also, remember, this may take a tad bit more time (not much though) because they aren't precut, I will cut them out nicely after the vinyl is laid on. Let me know if anybody wants this done. Hint Hint.....Carter...Chris....you guys just got new rides, so let's spruce them up . This offer is good for anyone of our club members and other non club members, but ones that are Camaro5 members that meet us at the car show this weekend with their camaro. I thought this would be something fun to do at the show, and I know I was supposed to get Chito hooked up with some bowties at the last show. Anyone interested?

04-19-2012, 12:03 AM	#8296
TCAT Drives: Has Wheels Join Date: May 2011 Location: On Earth Posts: 5,553	Hexis vinyl is definitely durable once it's on. Ask Felipe, as I put the same carbon on his gas door and bowties. I have the same type of carbon vinyl on my mirrors, dash trim, and door panels. Just clean it with some soap and water, and/or detail spray when it gets dirty.

04-19-2012, 12:06 AM	#8298
TCAT Drives: Has Wheels Join Date: May 2011 Location: On Earth Posts: 5,553	No problem Chito. I'll do your bowties first since I was supposed to do them last time. Thanks a ton man. Hopefully this helps out as well since we can have a mod day at the same time as the car show, lol. Now nobody will have to drive just to get them installed.

04-19-2012, 01:21 AM	#8301
TCAT Drives: Has Wheels Join Date: May 2011 Location: On Earth Posts: 5,553	No problem guys! I'm glad to help. This should look bitchin on all your cars.

04-19-2012, 01:57 AM	#8302
Missionboi SoCal HT5 [COTW: 8/12/13] Drives: 2013 2SS 1LE RS Join Date: Mar 2010 Location: Santa Clarita Posts: 1,254	so....I love my daily drive aka my VW GTI....but am second guessing lol I MIGHT be willing to sell whatever I have paid and transfer the name to the owner.. The NEW daily driver which I wanna buy instead of lease and just have is the Ford Raptor SVT! It looks so bad ass and always wanted a truck...I have found a few and trying to manage some deals. What do you guys think?