*Official* L99 Dyno Thread - Page 20 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Chuckyx1 · 03-12-2012, 12:42 AM

Quote:

Originally Posted by BowenSS1

1 7/8 Lt headers no cats
3"exhaust with corsa muffler
lmr intake
ls3 conversion lmr stage 2 cam
2300 Maggie
circle d 3200 t/c
dynoed on 22'' rims 537rwhp 542rwtq
gained 166 rwhp and 159rwtq over bolt ons http://youtu.be/KM_gn79s8kw

sounds nice, I've got 2011 Camaro l99
Off Road Headers
Ceramic Metallic Coating 3" pipes
Whipel Suppercharger
Jannetty tuned
putting Jannetty cam set up. right now 530 rwhp

BowenSS1 · 03-12-2012, 12:48 AM

Quote:

Originally Posted by Chuckyx1

sounds nice, I've got 2011 Camaro l99
Off Road Headers
Ceramic Metallic Coating 3" pipes
Whipel Suppercharger
Jannetty tuned
putting Jannetty cam set up. right now 530 rwhp

NICE!!!!!
How much boost are running? Im at 7-8lbs.

Chuckyx1 · 03-12-2012, 08:03 AM

Quote:

Originally Posted by BowenSS1

NICE!!!!!
How much boost are running? Im at 7-8lbs.

around 9!
I'm looking for my dino chart

Chuckyx1 · 03-12-2012, 10:20 PM

I use Jannetty Auto Racing, in Connecticut.

edog · 03-12-2012, 10:46 PM

Ok, after almost three years I hit the Dyno to fix an issue. Afterwards, tim at T&Tperformance and Ed Hutchings were able to fix the A/F ratio and increase the HP!

I have 2010 2SS L99
Dough Thorley Tri-Y LT headers 1 3/4
High Flow Cats
Doug Thorley Cat Back exhaust with X-pipe 2.5"
Halltech CAI
CNC Ported TB
Zaino car polish system...Worth 5HP

and previous tune by ECS, retuned by Ed Hutchings
Awaiting install are Pedders sways, drop springs, and endlinks.

3BCT4ID · 03-17-2012, 02:30 PM

Had a dyno day at RMCR Colorado Springs, Co last sat. And my 2010 L99 put down 333hp & 356tq

LonghornLove · 03-24-2012, 01:58 AM

Quote:

Originally Posted by MikeW

First pic is dyno results on car 100% stock. 1300 miles on car.
Broke in by routine city/highway driving with multiple hard accelerations every outing running car up to 85 - 90 mph and letting it coast down to 35- 45

This Guy gets more than me on a Mustang Dyno completely stock

Pull #1 313 WHP 306 TQ
Pull #2 317 WHP 308 TQ
Pull #3 311 WHP 308 TQ
My A/F is 11.1 at WOT

What can I expect with the A/F around 12.8

MODS: 1 7/8 Kooks LT headers and Kooks full exhaust, CAI cai W/ adm scoop and 93 JRE Tune for mods listed.

Mine is also SAE adjusted.

Bernardinetti · 04-15-2012, 04:29 PM

First run w/o mods

Second run after K&N Typhoon air filter.

Sounds great

Waiting now for the SuperChips Flashpak tuner I just ordered, and the headers.

`11 L99 2SS IOM

Rhino79 · 04-30-2012, 08:23 PM

Here is mine, Dynomite Dyno, 76* out and 99 % humidity...lol. Mods are in sig. I was dyno tuning and actually picked up about 10 rwtq and 5-6 rwhp vs the tune I was running when I ran 12.4.

378.5 rwhp, 395.4 rwtq

pierre777 · 05-08-2012, 02:02 PM

Did a new dyno run after supercharging ,mods are maggie sc ,ARH ,CAI , Corsa and a tune, 492rwhp and 462rwtq.

ChvyBoss · 05-08-2012, 03:29 PM

Quote:

Originally Posted by pierre777

Did a new dyno run after supercharging ,mods are maggie sc ,ARH ,CAI , Corsa and a tune, 492rwhp and 462rwtq.

Nice numbers bro

pierre777 · 05-09-2012, 02:34 PM

Quote:

Originally Posted by ChvyBoss

Nice numbers bro

Thanks bud

pierre777 · 05-10-2012, 04:41 AM

here's my graph, i was expecting a bit more though,

Mongoose03 · 05-10-2012, 06:26 AM

WOW! 3 pulls in 11 minutes....was they in a hurry to get you out of there or what. Heat soak brought the last 2 pull numbers down for sure.

03-12-2012, 10:46 PM	#271
edog Drives: 2010 2SS/RS IOM Join Date: Oct 2008 Location: F'BURG VA Posts: 3,832 View My Garage	Ok, after almost three years I hit the Dyno to fix an issue. Afterwards, tim at T&Tperformance and Ed Hutchings were able to fix the A/F ratio and increase the HP! I have 2010 2SS L99 Dough Thorley Tri-Y LT headers 1 3/4 High Flow Cats Doug Thorley Cat Back exhaust with X-pipe 2.5" Halltech CAI CNC Ported TB Zaino car polish system...Worth 5HP and previous tune by ECS, retuned by Ed Hutchings Awaiting install are Pedders sways, drop springs, and endlinks. Attached Images __________________ Update...Build in process, Forged Rods, Pistons and rings, Johnson Lifters, NOVI1500 ECS SC, 13lb boost or more, LS3 Conversion 114/228/241 COMP CAM, Frostbite 4 row Aluminum radiator, 6L80 built, Circle D 6L80 PRO SERIES MULTI 258MM 2D, Stock 3.45 gears, 1-7/8 American Racing Headers w/HF cat, X-Pipe, Lingenfelter dual fuel pump, E-85 flex sensor, ATI super damper pulley, Ported TB, 160 therm, Trans cooler, Pedder's sways/end links/sub frame bushings, BMR trailing arms & toe rods, Coil overs. HP/TQ pending

03-17-2012, 02:30 PM	#272
3BCT4ID Drives: 2010 camaro 2SS Join Date: Aug 2011 Location: Colorado springs Posts: 135	Had a dyno day at RMCR Colorado Springs, Co last sat. And my 2010 L99 put down 333hp & 356tq __________________ 2010 Camaro SS Last edited by 3BCT4ID; 09-07-2012 at 11:19 PM.

04-15-2012, 04:29 PM	#274
Bernardinetti Drives: 5th Gen 2011 Camaro 2SS 6.2 V8 IOM Join Date: Jun 2011 Location: NY Posts: 41	Here goes mine First run w/o mods Second run after K&N Typhoon air filter. Sounds great Waiting now for the SuperChips Flashpak tuner I just ordered, and the headers. `11 L99 2SS IOM

05-08-2012, 02:02 PM	#276
pierre777 HT5 COTW 9/3/2012 Drives: Cyber Bullet Join Date: Jun 2011 Location: lebanon Posts: 4,555 View My Garage	Did a new dyno run after supercharging ,mods are maggie sc ,ARH ,CAI , Corsa and a tune, 492rwhp and 462rwtq. __________________

05-10-2012, 04:41 AM	#279
pierre777 HT5 COTW 9/3/2012 Drives: Cyber Bullet Join Date: Jun 2011 Location: lebanon Posts: 4,555 View My Garage	here's my graph, i was expecting a bit more though, __________________

03-12-2012, 10:20 PM	#270
Chuckyx1 Drives: 2011 Fasties Maxies Join Date: Jun 2010 Location: Fishkill, NY Posts: 116	I use Jannetty Auto Racing, in Connecticut.

04-30-2012, 08:23 PM	#275
Rhino79 Drives: 2010 Camaro SS L99/Auto Join Date: Jul 2011 Location: Cabot, AR Posts: 2,827 View My Garage	Here is mine, Dynomite Dyno, 76* out and 99 % humidity...lol. Mods are in sig. I was dyno tuning and actually picked up about 10 rwtq and 5-6 rwhp vs the tune I was running when I ran 12.4. 378.5 rwhp, 395.4 rwtq

05-10-2012, 06:26 AM	#280
Mongoose03 Drives: 2011 2SS/RS Camaro Join Date: Apr 2012 Location: SW Ohio Posts: 73	WOW! 3 pulls in 11 minutes....was they in a hurry to get you out of there or what. Heat soak brought the last 2 pull numbers down for sure. __________________ Frank 2011 2SS/RS L99 GMPP Exhaust

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
L99 Love	Mod4SS	5th Gen Camaro SS LS LT General Discussions	95	02-14-2015 08:51 PM
Dyno Dynamics AWD Dyno @ Hennessey Performance	Hennessey Performance	USA - Texas	0	08-08-2009 11:03 AM
LS3 Tune Only Results .. Also stock LS3 vs. L99 dyno graph	LPFSTheFett	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	5	08-05-2009 08:04 AM
Tuning LS3 vs L99	Evilangel	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	17	10-30-2008 11:22 AM
L99 engine specifications	Tran	Wiki	0	10-19-2008 12:40 PM