MACE Ported Intake Manifold for you LLT - Page 4 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

h2oplay · 05-16-2012, 04:03 PM

Quote:

Originally Posted by Mach

There is a link on the very first post.. http://www.camaro5.com/forums/showthread.php?t=224166

Thanks, missed that post entirely....

PsychoZL1 · 05-16-2012, 04:03 PM

Quote:

Originally Posted by MACE_ENG

yes. and I believe he had gotten 290rwhp!! before the plenum cover, ported head(inlet).

Holy crap! That's awesome!

BTW,

JHenfling · 05-16-2012, 04:15 PM

Quote:

Originally Posted by MACE_ENG

What is most exciting to me is that the tq and hp doesn't stop growing after 4k. We all know that the insulator usually peak out at 4k rpm and start coming down. The cross ram porting really opens up and helps the 25mm insulator even that much more! The hp and tq is alL over the rpm board. I knew if cpr6 can create substancial amount of hp and tq on alloytec, there was going to be a way for cross ram porting for the LLT!

NC BOB and Jay

You are right I bought the Intake that come off of his car and all i can say is AWESOME it really makes it come alive with the Insulater,and Plenum spacer!!!

You guys have to jump on this I promise you will not regret it.

MACE_ENG · 05-16-2012, 04:55 PM

Quote:

Originally Posted by JHenfling

You are right I bought the Intake that come off of his car and all i can say is AWESOME it really makes it come alive with the Insulater,and Plenum spacer!!!

You guys have to jump on this I promise you will not regret it.

Thanks Jason. All we ask for everyone is for their very honest opinion and review. the 25mm and this cross ram porting is like match made in heaven. Now get those 1/4 times in

jth6373 · 05-16-2012, 08:24 PM

Do you think Vince from trifecta can get any additional power out of the tune with these two mods(spacer/IM)? Anyone contacted him?

MACE_ENG · 05-16-2012, 08:26 PM

Quote:

Originally Posted by jth6373

Do you think Vince from trifecta can get any additional power out of the tune with these two mods(spacer/IM)? Anyone contacted him?

He definitely can

hapisok · 05-16-2012, 08:35 PM

maybe its already been asked and i missed it, but if one were to order the IM and 25mm spacer, will those come port matched as a pair?

HopeRidesAlone · 05-16-2012, 09:47 PM

pm price please lol.

Mace great job once again

MACE_ENG · 05-16-2012, 10:24 PM

Quote:

Originally Posted by hapisok

maybe its already been asked and i missed it, but if one were to order the IM and 25mm spacer, will those come port matched as a pair?

Depends. If the customer choose gasket matching then the 25mm will have to be tapered off. 20minute job, but if the customer does not have any plans to touch the head than they are all good. Heck...I will taper the 25mm insulator in the price

Quote:

Originally Posted by HopeRidesAlone

pm price please lol.

Mace great job once again

Check your pm in about 10 minutes or go to the vendor section.

Jay-

atomic427 · 05-16-2012, 11:22 PM

I had a choice when I bought my car, I could either get a new 2011 with a small discount or a new 2012 with no discount. All of these mods coming out for the LLT from MACE, RX, Vmax have made me realize I made a good choice!!! Keep up the good work! Ported IM WILL be my next mod

MACE_ENG · 05-17-2012, 11:43 AM

I been getting alot of questions in regards about the 25mm insulator when gasket matching is opted. To make this easy for everyone, we will include the 25mm insulator gasket matching/tapering in the price! If no gasket matching is opted than you have nothing to worry about. Also, if you send us the OEM IM with the insulator already installed you have nothing to worry. We will also reinstall the 25mm insulator before shipping free of charge just the same way you sent it to us so all you will have to do is just reinstall on your part

We are easy to work with and we will also try our best to make everything easy for you guys! ALMOST everything is possible, all you have to do is ask

TJ91 · 05-17-2012, 01:24 PM

Jay? Say it aint so brother!!!!

MagnumForceGB · 05-17-2012, 02:00 PM

More money to spend. Can the throttle body get ported at the same time?

KMPrenger · 05-17-2012, 07:08 PM

So who out there is putting in an order for the ported manifold only? (assuming you already have an insulator, or don't plan to use one).

I want to hear your thoughts!

05-16-2012, 08:35 PM	#49
hapisok crazier than a coconut Drives: 2010 2SS/RS LS3 Join Date: Jul 2010 Location: virginia Posts: 1,547	maybe its already been asked and i missed it, but if one were to order the IM and 25mm spacer, will those come port matched as a pair? __________________

05-16-2012, 09:47 PM	#50
HopeRidesAlone Drives: 2010 Camaro Black 2SS/RS Join Date: Mar 2010 Location: Maryland Posts: 840 View My Garage	pm price please lol. Mace great job once again __________________ 2010 Black 2LT/RS - Injen CAI, ARK DTS Catback Polished Tips, OBX LT Headers, Lowered on Eibach, 3/8 blackiceolator, Trifecta Tuned.- *Totaled 3/10/13* 2010 Black 2SS/RS - Stainless powers 1 7/8 LT headers, cold air inductions cai, Tuned by dynosteve, Feesler side skirt, Feesler Spoiler, Feesler carbon fiber bowties, H&R Lowering Springs.

05-16-2012, 11:22 PM	#52
atomic427 Drives: 2011 victory red LS M6 Join Date: Feb 2012 Location: southwest florida Posts: 93	I had a choice when I bought my car, I could either get a new 2011 with a small discount or a new 2012 with no discount. All of these mods coming out for the LLT from MACE, RX, Vmax have made me realize I made a good choice!!! Keep up the good work! Ported IM WILL be my next mod __________________ Vararam - RX/VMAX Black Ice-olator - RX/VMAX Ported throttle body - RX Catchcan - RX Oil breather - 21lb Deka battery

05-17-2012, 01:24 PM	#54
TJ91 :chevy: Drives: 2LT/RS Join Date: Jun 2008 Location: Toronto Posts: 13,035	Jay? Say it aint so brother!!!! __________________ CAMARO Consult your doctor before taking Camaro Side effects include Sudden increase in Heart Rate, Insomnia and occasional hallucinations If you experience Permagrin exceeding 4 hours after taking Camaro, seek immediate Camaro5 Help CAMARO Bringing excitment back into the Garage

05-17-2012, 02:00 PM	#55
MagnumForceGB Drives: Fastest 2010 Camaro V6 Join Date: Apr 2010 Location: Newcastle, OK Posts: 3,571 View My Garage	More money to spend. Can the throttle body get ported at the same time? __________________ Camaro V6 = 11.268 @ 120.11

05-16-2012, 08:24 PM	#47
jth6373 Drives: 2013 Camaro 1SS Join Date: Mar 2010 Location: Allentown, PA Posts: 107	Do you think Vince from trifecta can get any additional power out of the tune with these two mods(spacer/IM)? Anyone contacted him?

05-17-2012, 11:43 AM	#53
MACE_ENG Drives: LLT Machine Join Date: Nov 2011 Location: VIC/AUS Posts: 563	I been getting alot of questions in regards about the 25mm insulator when gasket matching is opted. To make this easy for everyone, we will include the 25mm insulator gasket matching/tapering in the price! If no gasket matching is opted than you have nothing to worry about. Also, if you send us the OEM IM with the insulator already installed you have nothing to worry. We will also reinstall the 25mm insulator before shipping free of charge just the same way you sent it to us so all you will have to do is just reinstall on your part We are easy to work with and we will also try our best to make everything easy for you guys! ALMOST everything is possible, all you have to do is ask

05-17-2012, 07:08 PM	#56
KMPrenger Drives: 16 Camaro SS, 15 Colorado Join Date: May 2009 Location: Jefferson City, Missouri Posts: 13,967	So who out there is putting in an order for the ported manifold only? (assuming you already have an insulator, or don't plan to use one). I want to hear your thoughts! __________________ 2016 Camaro 1SS - 8-speed - NPP - Black bowties 2010 Camaro 1LT V6 (Sold. I will miss her!)