73camaroLT's 2002 SS Build Thread - Page 8 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

ndtguy · 05-12-2012, 08:57 AM

Very good! Glad that you are happy with it.

Lee0123567 · 05-12-2012, 01:40 PM

We need an exhaust clip sticky!

73camarolt · 06-06-2012, 11:31 AM

So I found out, my friend that helped me install my clear corners, stripped my passenger headlight. Found out the hard way, don't let friends work on you car!! Probably going to order a set of Depo whistler headlights.

Bulldogwinters · 06-09-2012, 01:33 AM

Quote:

Originally Posted by 73camarolt

So I found out, my friend that helped me install my clear corners, stripped my passenger headlight. Found out the hard way, don't let friends work on you car!! Probably going to order a set of Depo whistler headlights.

He stripped your headlight??

73camarolt · 06-09-2012, 01:55 PM

Quote:

Originally Posted by Bulldogwinters

He stripped your headlight??

Sorry he stripped the bolt and the threads inside the headlight that hold it on the bracket. I mean it's still on tight but I'm worried if I take it off, it won't go back on

73camarolt · 06-09-2012, 01:55 PM

Also picked up a ported throttle body today, planning on getting a SLP lid and doing the throttle body bypass. Also have an appointment for tint on Thursday. Going for 20% I think.

Bulldogwinters · 06-09-2012, 04:16 PM

Quote:

Originally Posted by 73camarolt

Sorry he stripped the bolt and the threads inside the headlight that hold it on the bracket. I mean it's still on tight but I'm worried if I take it off, it won't go back on

Same thing happened to mine... only I can't get the damn thing off my car!!

xXSilencerXx · 06-09-2012, 05:42 PM

Quote:

Originally Posted by 73camarolt

So I found out, my friend that helped me install my clear corners, stripped my passenger headlight. Found out the hard way, don't let friends work on you car!! Probably going to order a set of Depo whistler headlights.

Yea there's only a few people I'll let work on my car for that very reason.

73camarolt · 06-10-2012, 10:38 PM

Quote:

Originally Posted by Bulldogwinters

Same thing happened to mine... only I can't get the damn thing off my car!!

I got mine to move by pushing the back of it while turning it but I didnt take it out all the way.

Quote:

Originally Posted by xXSilencerXx

Yea there's only a few people I'll let work on my car for that very reason.

Yea I hate having others helping me with me car. But I figured, it's one bolt, is it really that hard and I guess it was.

Anyway, heard a setup that I have to have. GMMG with ARH long tubes and catted y. It was very deep and aggressive with almost no rasp. It screamed above 4k. I had a few things to pay off then buy a air lid, then all my money will be saved towards a GMMG. Should have done it the first time but I didn't realize someone reproduces them. I should have waited and done more research.

dmginc · 06-11-2012, 06:47 AM

the place that sells the GMMG now charges like 250 for shipping ontop of the 750 for the GMMG exhaust, i was going to buy one for my TA last year but could not bring myself to pay the shipping.

xXSilencerXx · 06-11-2012, 07:20 AM

Quote:

Originally Posted by dmginc

the place that sells the GMMG now charges like 250 for shipping ontop of the 750 for the GMMG exhaust, i was going to buy one for my TA last year but could not bring myself to pay the shipping.

+1, if you want to the chambered sound look into getting a chambered muffler to put in place of your LM2 muffler. I ended up going the magnaflow route but the clips of the chambered ones sounded good too.

73camarolt · 06-11-2012, 10:54 AM

Quote:

Originally Posted by dmginc

the place that sells the GMMG now charges like 250 for shipping ontop of the 750 for the GMMG exhaust, i was going to buy one for my TA last year but could not bring myself to pay the shipping.

Someone pointed me to this. It is 675 shipped. Seems like a good deal to me. Also the guy I heard the exhaust from is going to CME so he said he would sell me his oval GMMG tips

Quote:

Originally Posted by xXSilencerXx

+1, if you want to the chambered sound look into getting a chambered muffler to put in place of your LM2 muffler. I ended up going the magnaflow route but the clips of the chambered ones sounded good too.

Yea I was looking into this to. I guess part of my really wants the best of everything but then again just swapping in a new muffler sounds a lot cheaper.

Here is the link I found the exhaust:
http://madhammer.com/pages/mad_hamme...2-02_cama.html

dmginc · 06-11-2012, 12:51 PM

that is a good price, hawks third gen was the only place selling them when i wanted to buy but they were charging 750 (same price GMMG charged) but they were charging an additional 250 for shipping where GMMG included shipping in the 750.

xXSilencerXx · 06-11-2012, 01:11 PM

Quote:

Originally Posted by 73camarolt

Someone pointed me to this. It is 675 shipped. Seems like a good deal to me. Also the guy I heard the exhaust from is going to CME so he said he would sell me his oval GMMG tips

Yea I was looking into this to. I guess part of my really wants the best of everything but then again just swapping in a new muffler sounds a lot cheaper.

Here is the link I found the exhaust:
http://madhammer.com/pages/mad_hamme...2-02_cama.html

Yea I was looking at the same exhaust, but it was cheaper to get the LM and swap mufflers so I went that route.

Quote:

Originally Posted by dmginc

that is a good price, hawks third gen was the only place selling them when i wanted to buy but they were charging 750 (same price GMMG charged) but they were charging an additional 250 for shipping where GMMG included shipping in the 750.

Madhammer has been selling them for a few years. Nobody seems to know about them though.

05-12-2012, 08:57 AM	#99
ndtguy ^ Me. Things I write ~> Drives: 2010 Camaro SS Join Date: Nov 2011 Location: Vegas Posts: 325	Very good! Glad that you are happy with it. __________________ ndtguy New DD: 2010 Camaro SS L99/A6 - bone stock. Gone but not forgotten... - 2001 Camaro SS m6 - SLP lid, free ram-air mod, poly sway bar bushings/end links, BMR springs and bilsteins. - 1998 Trans Am m6, forged 347, T70;alky-water injection; intercooled, 208/230 .549/.579 121LSA, Moser 12 bolt, 561rwhp/611rwtq.

05-12-2012, 01:40 PM	#100
Lee0123567 Nope! v6. Drives: 2001 SOM v6 Join Date: Mar 2012 Location: Ottawa, OH Posts: 459	We need an exhaust clip sticky! __________________ 3" Magnaflow cat-back, MSD 8.5mm Super Conductor Wires, NGK Iridium plugs, KN Air Filter, Halo Headlights, Shaved Air Lid, Chrome ZR1 Rims, SS Hood Scoop/Spoiler

06-06-2012, 11:31 AM	#101
73camarolt Drives: 2002 Camaro SS Join Date: Feb 2009 Location: Germantown, MD Posts: 2,355 View My Garage	So I found out, my friend that helped me install my clear corners, stripped my passenger headlight. Found out the hard way, don't let friends work on you car!! Probably going to order a set of Depo whistler headlights. __________________ 2002 Camaro SS- BTR Stage 3, 799 Heads, Bolt on's Tuned by John at Broadview Automotive.. 420hp and 400tq

06-09-2012, 01:55 PM	#104
73camarolt Drives: 2002 Camaro SS Join Date: Feb 2009 Location: Germantown, MD Posts: 2,355 View My Garage	Also picked up a ported throttle body today, planning on getting a SLP lid and doing the throttle body bypass. Also have an appointment for tint on Thursday. Going for 20% I think. __________________ 2002 Camaro SS- BTR Stage 3, 799 Heads, Bolt on's Tuned by John at Broadview Automotive.. 420hp and 400tq

06-11-2012, 06:47 AM	#108
dmginc Drives: In Circles Join Date: Mar 2011 Location: South Carolina Posts: 3,433 View My Garage	the place that sells the GMMG now charges like 250 for shipping ontop of the 750 for the GMMG exhaust, i was going to buy one for my TA last year but could not bring myself to pay the shipping. __________________ CAI Cold Air Intake, BMR Strut Tower Brace, BMR 1.2" Lowering Springs Gen5DIY Fog Lights, Big Worm Third Brake Light/Side Marker Tint (Charcoal) GTS Tail Light Covers, Purple Under Hood Lighting Magnaflow Resonated X-Pipe w/ Muffler Delete Black Plasti Dipped Wheels, Z/28 Spoiler

06-11-2012, 12:51 PM	#111
dmginc Drives: In Circles Join Date: Mar 2011 Location: South Carolina Posts: 3,433 View My Garage	that is a good price, hawks third gen was the only place selling them when i wanted to buy but they were charging 750 (same price GMMG charged) but they were charging an additional 250 for shipping where GMMG included shipping in the 750. __________________ CAI Cold Air Intake, BMR Strut Tower Brace, BMR 1.2" Lowering Springs Gen5DIY Fog Lights, Big Worm Third Brake Light/Side Marker Tint (Charcoal) GTS Tail Light Covers, Purple Under Hood Lighting Magnaflow Resonated X-Pipe w/ Muffler Delete Black Plasti Dipped Wheels, Z/28 Spoiler

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Winter's 2001 SS Build thread!	Bulldogwinters	4th Generation Camaros	776	06-05-2013 08:09 PM
Blueclyde's 2011 2SS/RS LS3 Build Thread	Blueclyde	Member Car Journals	18	05-04-2011 01:01 PM
SneakyWorm's 2010 SS build thread	sneakyworm	Member Car Journals	7	04-19-2011 03:44 PM
SS vs Z. Why?? Not another Z28 Thread!! Just curious.	TRIXXTERR	General Automotive + Other Cars Discussion	29	01-21-2011 10:27 AM
Do you want the Z28?	ChrisB	Camaro ZL1 Forum - ZL1 Specific Topics	1616	09-05-2010 12:49 AM