DIY Change LEDs in Speed/Tach Gauge - Page 17 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

572HP · 05-08-2012, 09:30 AM

Quote:

Originally Posted by nikos30

how about the traction control button/shifter legend for the automatics?

Are you asking about what size? The automatic shifter legends are lit up with a single 5mm LED. The traction control button is the same between the A6 and M6...and I don't recall what size it was. One of the two small LEDs that are used for all of the other switches. You need to order a few extra anyway, and I believe it only takes a single LED.

nikos30 · 05-08-2012, 12:39 PM

I dont want to be a burden to everybody, so can someone pm me on helping me find all the lights that I want? I read the entire post, I just don't want to mess up.

anglwngss · 05-08-2012, 02:12 PM

will send PM

GaBoy25 · 05-08-2012, 03:11 PM

Really friggin cool!!! Great thread!!!

DPerry · 06-18-2012, 07:53 PM

how much did this cost?

CamaroLS · 06-18-2012, 09:06 PM

Wonder if he can do them in yellow? Also how long did it take you to get them back?

Caddyroger · 06-18-2012, 10:19 PM

Quote:

Originally Posted by CamaroLS

Wonder if he can do them in yellow? Also how long did it take you to get them back?

If you are talking about creektrack he sends the unit back the next day. He sent mine back in less the 24 hours after getting it. I took every apart and just sent him the circuit board.
You will have to get the color of leds that you want and let know where and what color to install. This where most of bought the leds

http://www.oznium.com/plcc-2

CamaroLS · 06-19-2012, 08:44 AM

Quote:

Originally Posted by Caddyroger

If you are talking about creektrack he sends the unit back the next day. He sent mine back in less the 24 hours after getting it. I took every apart and just sent him the circuit board.
You will have to get the color of leds that you want and let know where and what color to install. This where most of bought the leds

http://www.oznium.com/plcc-2

Ok. Do you have to recalibrate the cluster after you get it all back together? Thanks for the info!!

LIV4MUDDIN · 06-19-2012, 12:04 PM

Quote:

Originally Posted by CamaroLS

Ok. Do you have to recalibrate the cluster after you get it all back together? Thanks for the info!!

You don't have recalibrate. What I did with mine was plug in the cluster, turn on key, and let the pins for the needles go all way left then right, like what happens when you start your car. Then turn key off. That way when you push needles back on they are lined up correctly. I used creektrack for mine also. Great work and very quick turn around. I had him do all my switches in the car. Heres mine

CamaroLS · 06-19-2012, 01:32 PM

Quote:

Originally Posted by LIV4MUDDIN

You don't have recalibrate. What I did with mine was plug in the cluster, turn on key, and let the pins for the needles go all way left then right, like what happens when you start your car. Then turn key off. That way when you push needles back on they are lined up correctly. I used creektrack for mine also. Great work and very quick turn around. I had him do all my switches in the car. Heres mine

What does something like that cost for all that you had done?

LIV4MUDDIN · 06-19-2012, 07:02 PM

Quote:

Originally Posted by CamaroLS

What does something like that cost for all that you had done?

Just contact creektrack at creektrack@yahoo.com and tell him what your are wanting done and he will give you the amount. You have to order the LEDs but he will tell you which ones and how many

nikos30 · 06-19-2012, 07:13 PM

i wish I could just drop my car off and have it done. that looks amazing.

LIV4MUDDIN · 06-19-2012, 11:56 PM

Quote:

Originally Posted by nikos30

i wish I could just drop my car off and have it done. that looks amazing.

Thanks. Lol yea but having the know you did it is nothing greater. I get so many compliments at shows.

creektrack · 06-20-2012, 08:03 AM

I really hate to do this because I love being able to help people out, but I've gotten a few emails over the past few days, so I figured I should address this...

I will no longer be doing any swaps, I started out doing this for super cheap compared to everyone else cuz I wanted to help ppl out and make someone with a low budget be able to compete with all these "ballers" out here, but in the end, its just not making me enough money to justify the headaches and stress of worrying about messing something up or whether or not it was done right...I've already had a couple times like that, and thankfully the "customers" were very understanding, especially anglwings, who was the reason any of this was possible...

So once again, I'm sorry to say this, but I will no longer be doing any more swaps, unless I've already done a swap for you and you need something changed out or repaired...

If anyone still needs a swap done, I encourage you to check out other car forums in your area...if you're having a hard time finding someone, oznium.com has a small list of installers, and I would check out Scion forums, as they are the first group of ppl to start doing these kind of moss...

Sent from my PG86100 using Tapatalk

05-08-2012, 12:39 PM	#226
nikos30 HT5 EastSide Drives: 2010 Camaro 2LT Join Date: Aug 2010 Location: NJ/PA Posts: 1,594 View My Garage	I dont want to be a burden to everybody, so can someone pm me on helping me find all the lights that I want? I read the entire post, I just don't want to mess up. __________________

05-08-2012, 02:12 PM	#227
anglwngss Texas Camaros Drives: 2011 Synergy Green 2SS/RS Join Date: Oct 2010 Location: Venus, Tx Posts: 1,681	will send PM __________________

06-18-2012, 07:53 PM	#229
DPerry Drives: 2010 Black LT Join Date: Apr 2012 Location: Murfreesboro TN Posts: 337 View My Garage	how much did this cost? __________________ http://www.camaro5.com/forums/showthread.php?t=387407

06-19-2012, 07:13 PM	#236
nikos30 HT5 EastSide Drives: 2010 Camaro 2LT Join Date: Aug 2010 Location: NJ/PA Posts: 1,594 View My Garage	i wish I could just drop my car off and have it done. that looks amazing. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Change the Gauge Cluster Color???	rharon	Camaro DIY & HOW-TO instructions & discussions	26	12-19-2021 05:47 PM
NON RS RED HALOS LEDS AND MORE DIY PROJECT !!!	1969to2010	Camaro DIY & HOW-TO instructions & discussions	14	02-21-2011 02:56 PM
DIY: ABL Color Change	Tecca	Camaro DIY & HOW-TO instructions & discussions	20	05-18-2010 07:50 PM
Dealer-Oil change or DIY?	wlvrine	Mechanical Maintenance: Break-in / Oil & Fluids / Servicing	32	06-23-2009 10:45 PM
Obama Climate Change Advisers Holdren and Lubchenco Are Told Global Warming Is Over	bigralph	Off-topic Discussions	15	02-06-2009 08:07 PM

06-18-2012, 09:06 PM	#230
CamaroLS Drives: 2014 Blue Ray Met. Camaro 1SS Vert Join Date: Feb 2012 Location: Indiana Posts: 1,519	Wonder if he can do them in yellow? Also how long did it take you to get them back?

06-20-2012, 08:03 AM	#238
creektrack Drives: N/A Join Date: Jul 2011 Location: Houston, Tx Posts: 41	I really hate to do this because I love being able to help people out, but I've gotten a few emails over the past few days, so I figured I should address this... I will no longer be doing any swaps, I started out doing this for super cheap compared to everyone else cuz I wanted to help ppl out and make someone with a low budget be able to compete with all these "ballers" out here, but in the end, its just not making me enough money to justify the headaches and stress of worrying about messing something up or whether or not it was done right...I've already had a couple times like that, and thankfully the "customers" were very understanding, especially anglwings, who was the reason any of this was possible... So once again, I'm sorry to say this, but I will no longer be doing any more swaps, unless I've already done a swap for you and you need something changed out or repaired... If anyone still needs a swap done, I encourage you to check out other car forums in your area...if you're having a hard time finding someone, oznium.com has a small list of installers, and I would check out Scion forums, as they are the first group of ppl to start doing these kind of moss... Sent from my PG86100 using Tapatalk