05-25-2009, 12:54 PM | #1 |
Master of the V6
|
V6 Camaro Dyno numbers are in!!
Also featured on homepage.
Just got back from the shop. The goal of the day was simply to get *baseline* numbers, so we can justify the real world gains of anything added to the car. Info below: Dyno type: Mustang Filter value: 33 Air temp: 78F Humidity: 83% (ouch) Car: 2010 Camaro Engine: 3.6L V6 Direct Injection Trans: 6L50 6spd automatic Mod: Bone stock, right down to the plastic still on my carpet. Octane: 87 (lol) Best run: 246RWHP | 220lbs/tq Notes: * Torque curve is basically flat from 2500 to 5800, dipping by the 6900 mark * HP curve is a steady arc, flattening out right at redline * Factory tune is PIG RICH , holding down in the 11.4 range through the bulk of the run. There is a good bit of power hiding in just a tune. * We did a run w/ the AC on just for fun - you can see clearly where it was shut off. Lots of power loss at the accy :( Overall, the numbers are spot on with their factory ratings through an automatic. The exhaust and intake is going to do wonders for the car. The over-rich tune from factory, and the high speed processing capabilities of the Motec ME9 are just begging this motor to be turbo/supercharged. More to follow throughout the next week or so as parts start to trickle in Cheers! Last edited by MadMaxx; 05-26-2009 at 08:57 AM. |
05-25-2009, 01:06 PM | #2 |
Drives: Rust bucket and a jalopy Join Date: May 2009
Location: Central florida
Posts: 52
|
You are the man!
I was hoping that torque curve would be nice and flat. I'm shocked at how rich it's running! I wonder how much boost could be used on stock fuel levels before it starts to knock from leaning out. But not something I'd ask anyone to try heh. That's fantastic news on the dyno run! Congrats maddmaxx! You just cemented my V6 order! |
05-25-2009, 01:09 PM | #3 |
Drives: Hyundai Sonata Join Date: Feb 2009
Location: Little Rock, AR
Posts: 497
|
Sweet!! Thanks for posting the results so fast. Can't wait to see the graph. I'd like to see what the VVT does for the torque curve. And 11.4:1 = ouch. Good tune, CAI and exhaust and I'll put money on this motor breaking 300RWHP. Exciting stuff!
|
05-25-2009, 01:12 PM | #4 |
Account Suspended
|
I seriously doubt that a CAI,tune and exhaust is going to net you 54rwhp on the V6, but the numbers are great in any case.
|
05-25-2009, 01:15 PM | #5 |
Drives: Hyundai Sonata Join Date: Feb 2009
Location: Little Rock, AR
Posts: 497
|
True... 54 is a lot. I got over zealous. The V-8's are getting about 45 with all that, so maybe 280 for the V-6? 275?
|
05-25-2009, 01:17 PM | #6 | |
Master of the V6
|
Quote:
54rwhp may be a tall order, but 40ish should be possible.... either way, lots of potential in this little gem. |
|
05-25-2009, 01:45 PM | #7 |
|
Nice results, you should try and get to the track for some real-world results at the drag strip before you start modifying the car.
__________________
|
05-25-2009, 01:46 PM | #8 |
Drives: 2006 Dodge Charger / 2SS IOM Join Date: Dec 2008
Location: United Kingdom
Posts: 1,640
|
i doubt your car is completely broken in, is it?
|
05-25-2009, 01:48 PM | #9 |
Okie doke
|
Very nice numbers on a mustang dyno!! ..
Congrats .. Crowley
__________________
|
05-25-2009, 01:51 PM | #10 |
Master of the V6
|
|
05-25-2009, 03:10 PM | #11 |
Drives: 2010 Camaro 2LT CGM, IOM Int. Join Date: Mar 2009
Location: Orange County, CA
Posts: 381
|
I'm new to this, but that AFR sounds pretty low. Are some of the more experienced guys thinking the CAI will boost that a bit? Any guesses where it might come out with just a CAI or perhaps CAI and cat-back?
|
05-25-2009, 04:32 PM | #12 |
Master of the V6
|
The AFR is far richer than I'd expect for an NA platform. Right now, there isn't much ability to tune directly -- although with a signal augmentation (ie: piggyback) setup, we may be able to trick the ECU into leaning the mix out a bit.
|
05-25-2009, 06:11 PM | #13 |
Drives: Hyundai Sonata Join Date: Feb 2009
Location: Little Rock, AR
Posts: 497
|
Flattest. Torque curve. Ever.
This is why Chevy's next V-8 should be a 6.2L DOHC VVT DI engine. |
05-25-2009, 06:15 PM | #14 |
36.58625, -121.7568
|
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
V8 Camaro Performance Upgrades List | Milk 1027 | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 93 | 08-30-2021 05:56 PM |
Camaro Laws | ChevyNut | Off-topic Discussions | 107 | 11-09-2016 05:40 PM |
Camaro SS 2010 on dyno makes 364 whp & 371 rwtq !! Vid inside | UCF w00t | Camaro Photos | Spyshots | Video | Media Gallery | 128 | 03-20-2011 10:27 PM |
GM memo to dealers | Moose | 5th Gen Camaro SS LS LT General Discussions | 41 | 02-04-2010 07:33 PM |
Car and Driver drives V6 Camaro! | Xanthos | 5th Gen Camaro SS LS LT General Discussions | 63 | 08-26-2008 09:21 PM |