WTB: 2012 LS Fog Light Kit

[meller215]

I just bought a 2012 LS and would like to take the ugly black covers out and put in some fog lights. The standard OEM fog lights would even be fine just to have something in those holes to replace the blank covers.

Anyone have any they'd like to sell? I think the LT's have the fog lights too.

[David53]

This is where I bought mine.

Nothing fancy, but they work good.

http://www.gmpartsdirect.com/catalog/frameset.cfm

I got the wiring harness here; worked great.

http://foglightwiring.com/

[puzzzeler]

this is what i did, http://www.amazon.com/gp/product/B00...00_i00_details
and http://www.ebay.com/itm/CHEVY-GMC-SU...40753410221923 and try this video
fit like a glove and i wired them to my side markers any questions let me know hope this helps it was the cheapest i was able to fine

[redhotcandy]

Can you tell me what the size of the fog lights are? I installed a pair in my LS last year and they are too wide. From what I can tell, I think the OEMs are about 3.5". If these are approximately that size, I'm going to get them and change mine out! Thanks for posting your information and your car looks great!

[meller215]

Originally Posted by puzzzeler

this is what i did, http://www.amazon.com/gp/product/B00...00_i00_details
and http://www.ebay.com/itm/CHEVY-GMC-SU...40753410221923 and try this video
fit like a glove and i wired them to my side markers any questions let me know hope this helps it was the cheapest i was able to fine

Awesome!!! Thanks for the video, now I just need to work on how to wire it.

[zkdreads]

i just bought these and they work like a champ. i have a switch inside the car on my door panel. i just borrowed a dremel and cut a hole in my fog bezels, they came with the wiring kit, relay and switch

http://www.ebay.com/itm/2010-Chevrol...ht_2767wt_1169

[puzzzeler]

Well i dont know the true size but the ones i posted from ebay are a direct fit ,The car in the video is not mine ,i found that video on utube and it helped me out alot ,as far as wireing goes this too is easy i just took my side markers out and ran my wire up to them theres a black wire and a colored wire in each side the black is ground and the colored is hot i striped the sheething and poked a hole through the center of my wires and wraped them together then sodered them , then wraped them in tape ,hope this helps

[brohan]

i really would like to know how much and if this was an easy project. i live out in the country where deer and hogs run wild and this option sure would be nice!!!

[puzzzeler]

brohan check out post number 3 ,this should help you

[ya boy willz]

I'm pretty sure the stock fog light size is 3.5" (Haven't measure it though). That's the size of the kit that zkdreads bought and when I installed 3" fogs on our IOM LS there was about an extra .25" of space on both sides (so .5" total).

What you can do is buy 3" fogs that are projectors and have Halos likes These and then instead of dremeling the whole middle part of the fog light covers you can dremel off only the inside part (the part that has ridges) and they'll fit in there perfectly.

That's how I should've originally installed mine, but it wasn't until the second fog light cover that I realized I shouldn't have dremeled the entire middle and by then it was too late. Here's pictures of my set up so you can get an idea.

Just Halos on:

Just Fogs on (not aimed):


View of them on the car:

Here you can see the little gaps on the side because I dremeled the entire middle:


Just a heads up incase you get an E-bay kit you may have to upgrade the wires that come out of the switch that's included in the kit. Here's a picture of the switch:


The wires that come out of that switch are extremely small and after a couple of extended uses of the fogs they all melted and my fogs stopped working. I ended up just replacing those really small wires with some wire I bought from Autozone and they've worked perfect ever since. I also ran my power source to this constant Voltage post on the battery terminal so I didn't have to hack into my turn signal wiring and then I ran the wire for the switch all the way up my drivers fender and into the cabin through the door so I didn't have to drill into the fire wall or find an existing hole (was being lazy lol).
P.S: Ignore the dates on those pictures, my camera resets the date every time I take out the batteries and I'm usually to lazy to reset it.

[The Stig]

The stock fog lights are 4". The DRLs are also 4"

[jatt5ab1soorma]

Originally Posted by puzzzeler

this is what i did, http://www.amazon.com/gp/product/B00...00_i00_details
and http://www.ebay.com/itm/CHEVY-GMC-SU...40753410221923 and try this video
fit like a glove and i wired them to my side markers any questions let me know hope this helps it was the cheapest i was able to fine

i went to the ebay link and it says its not compatible with 2011 LS... does it just say that??

[puzzzeler]

yes it does just watch the video and look at how they mount then go look at fog lights same three mounting things

[ToninRando]

ya boy willz, how did you secure the projector fogs in the fog light hole behind the bezel? the stock fogs have three prongs that secure them, but these are different on the back. Did you use brackets, and if so where did you connect them?