275/40s on a 10" wheel? - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Doc · 07-22-2012, 04:00 AM

If you're going to run 275/40's look into getting a 19" wheel. I have 275/40-19's on all 4 corners; the rims are 19 x 9.5" with I believe a 28mm offset. There are no clearance issues in the front although I have Pedder's coilovers which might help.

Try and reduce the unsprung weight if at all possible. If you're not going any bigger than a 275 in the front just get a 9.5" wide rim. There's no advantage to using a 10" rim and you're just adding unnecessary weight. The optimum rim width for a 275/40 is actually 9.5" so they fit perfectly. If you can knock 4 or 5 lbs off each wheel by only going as wide a rim as necessary, and possibly a 19, you'll be amazed at the difference in the car's performance.

Not sure why you're doing the wider tire in the rear unless you're doing drag racing maybe? With 275/40's all the way around my car has plenty of traction and handles great. I got 3-piece forged rims and even though the fronts are 1.5" wider than the stock wheels, I still removed a total of 30 lbs of unsprung rotating weight for all 4 by switching to 19 x 9.5's compared to the factory 20" wheels. The effect on acceleration and braking is like removing 300 lbs of static weight from the car. You can definitely feel the improved response.

Revo1 · 07-22-2012, 04:18 PM

Some really good feedback here, I appreciate it

I even learned that I should've searched instead of posting this thread!

But ASIDE from that I'm really learning alot here. Thanks for backin me up guys, my wheel purchase is def going to be a confident one.

SUX2BU · 07-22-2012, 05:00 PM

Quote:

Originally Posted by Revo1

Pretty sure 315s will rub up front, unless I'm misinformed. Looking at NTO Invos...

I meant run 275 or 285 all the way around.

Ocikat · 07-22-2012, 06:14 PM

Quote:

Originally Posted by Revo1

Have to go 10" on all four corners to get the concave look I want- but as I understand it, running a wider tire than 275 up front is unwise. If it will work, the plan is 10" wheels on all four corners, 275/40/20 up front, 315/35/20 rear. Thoughts?

Am I looking at a ton of stretch? Anyone running this setup?

Thanks fellas.

this is 275/40-20 in front, 315/35-20 in rear rims are 20X9.5 in front and 20X11 in rear. Offset: +32 front, +45 rear
stock height on car, no clearance issues and handles great

Revo1 · 07-22-2012, 09:56 PM

Quote:

Originally Posted by SUX2BU

I meant run 275 or 285 all the way around.

Car's my DD, don't have the resources to buy separate wheels/DRs for drag, so these tires are gonna have to cut it for weekend circuit and drag racing. Plus they look great from the back.

Sleez · 07-22-2012, 10:04 PM

315 is a bit wide for a 10", usually recommended 10.5 to 12.5, would probably have a bit of bulge.

the fronts should be fine as long as your offsets are cool.

xavier02832 · 07-23-2012, 09:25 AM

Im running 275/40/20s on my ZL1 10 inch rim (fronts). Here are a couple pics. I have a couple more if needed, lmk.

Name: 459322_3699028032572_1597969411_o.jpg
Views: 6315
Size: 170.9 KB

Name: 459322_3699028032572_1597969411_o.jpg
Views: 6315
Size: 170.9 KB

Name: 456324_3699041992921_984817472_o.jpg
Views: 3960
Size: 200.6 KB

Orange Bowtie · 07-23-2012, 03:37 PM

I have 275 40's on 10" rims on all corners. Might want to look at the BFG G-Force Comp2 Tires. I had the Invos and they did look a little stretched. I did not like them and switched to the BFG G-force because they have a little wider thread width than the Invos. I am much happier.

Revo1 · 07-23-2012, 03:43 PM

Good advice, thanks

Doc · 07-23-2012, 05:37 PM

Quote:

Originally Posted by Orange Bowtie

I have 275 40's on 10" rims on all corners. Might want to look at the BFG G-Force Comp2 Tires. I had the Invos and they did look a little stretched. I did not like them and switched to the BFG G-force because they have a little wider thread width than the Invos. I am much happier.

How do you like the comp2's? I've heard mixed reviews.

Revo1 · 07-23-2012, 06:05 PM

Quote:

Originally Posted by Doc

How do you like the comp2's? I've heard mixed reviews.

Not sure I've seen them... What's the price tag look like?

SparkyDL75 · 07-23-2012, 08:54 PM

Quote:

Originally Posted by edneyens

Revo, JRT:

There are several Rim & Tire web sites that can be helpful for selecting the best combinations for new wheels and tires. Here is my favorite:

http://www.rimsntires.com/specs.jsp

This is what it shows for comparing stock front verses rear wheel-tire combinations and what you would see if you placed a stock rear wheel-tire combination on front.

Please consider using to help make your choice for new configurations.

Regards.

Are these sizes the stock SS sizes? If not what are the stock offsets?

JRT · 07-23-2012, 09:18 PM

What he posted was stock size and offset for the 20's +35F/+40R.

JRT · 07-23-2012, 09:19 PM

Quote:

Originally Posted by edneyens

Revo, JRT:

There are several Rim & Tire web sites that can be helpful for selecting the best combinations for new wheels and tires. Here is my favorite:

http://www.rimsntires.com/specs.jsp

This is what it shows for comparing stock front verses rear wheel-tire combinations and what you would see if you placed a stock rear wheel-tire combination on front.

Please consider using to help make your choice for new configurations.

Regards.

Thanks man, that helped a lot!

07-22-2012, 04:00 AM	#15
Doc Dances With Mustangs Drives: 2010 1SS/RS MT Join Date: May 2009 Location: USA Posts: 3,819 View My Garage	If you're going to run 275/40's look into getting a 19" wheel. I have 275/40-19's on all 4 corners; the rims are 19 x 9.5" with I believe a 28mm offset. There are no clearance issues in the front although I have Pedder's coilovers which might help. Try and reduce the unsprung weight if at all possible. If you're not going any bigger than a 275 in the front just get a 9.5" wide rim. There's no advantage to using a 10" rim and you're just adding unnecessary weight. The optimum rim width for a 275/40 is actually 9.5" so they fit perfectly. If you can knock 4 or 5 lbs off each wheel by only going as wide a rim as necessary, and possibly a 19, you'll be amazed at the difference in the car's performance. Not sure why you're doing the wider tire in the rear unless you're doing drag racing maybe? With 275/40's all the way around my car has plenty of traction and handles great. I got 3-piece forged rims and even though the fronts are 1.5" wider than the stock wheels, I still removed a total of 30 lbs of unsprung rotating weight for all 4 by switching to 19 x 9.5's compared to the factory 20" wheels. The effect on acceleration and braking is like removing 300 lbs of static weight from the car. You can definitely feel the improved response. __________________ Blue Angel is here!! 1SS/RS LS3 M6 IBM

07-22-2012, 04:18 PM	#16
Revo1 Don't Like it? Suggit. Drives: 2010 2SS/RS Join Date: Aug 2008 Location: Fresno, CA Posts: 14,832 View My Garage	Some really good feedback here, I appreciate it I even learned that I should've searched instead of posting this thread! But ASIDE from that I'm really learning alot here. Thanks for backin me up guys, my wheel purchase is def going to be a confident one. __________________ "Tops off, tach up baby- loud and proud!" A Camaro lover from day one- 1996 3.8 V6 Camaro, to 1996 5.7 LT1 Camaro Z28, to the sold 2002 5.7 LS1 Camaro SS, and NOW, a [I]6.2 L99 VR 2SS/RS: XS Power stainless full exhaust, Airaid CAI, BMR drop springs and sways, custom tune by Cal Speed- 411rwhp

07-23-2012, 03:43 PM	#23
Revo1 Don't Like it? Suggit. Drives: 2010 2SS/RS Join Date: Aug 2008 Location: Fresno, CA Posts: 14,832 View My Garage	Good advice, thanks __________________ "Tops off, tach up baby- loud and proud!" A Camaro lover from day one- 1996 3.8 V6 Camaro, to 1996 5.7 LT1 Camaro Z28, to the sold 2002 5.7 LS1 Camaro SS, and NOW, a [I]6.2 L99 VR 2SS/RS: XS Power stainless full exhaust, Airaid CAI, BMR drop springs and sways, custom tune by Cal Speed- 411rwhp

07-23-2012, 09:18 PM	#27
JRT Drives: 2011 IOM 2SS/RS Join Date: Apr 2012 Location: VA Posts: 400	What he posted was stock size and offset for the 20's +35F/+40R. __________________ 2011 IOM SS/RS L99 2015 Ducati Diavel Carbon Red

07-22-2012, 10:04 PM	#20
Sleez Drives: 2010, 2LT, RS, 6M, ABM (#1893) SOLD Join Date: Mar 2011 Location: Willits, CA Posts: 1,437 View My Garage	315 is a bit wide for a 10", usually recommended 10.5 to 12.5, would probably have a bit of bulge. the fronts should be fine as long as your offsets are cool.

07-23-2012, 09:25 AM	#21
xavier02832 Drives: 13 ZL1-SOLD, 13 GT500-Sold Join Date: Jan 2010 Location: Sunrise Posts: 450	Im running 275/40/20s on my ZL1 10 inch rim (fronts). Here are a couple pics. I have a couple more if needed, lmk.

07-23-2012, 03:37 PM	#22
Orange Bowtie Drives: 2012 2SS/RS Camaro Join Date: Apr 2009 Location: Itasca TX Posts: 25	I have 275 40's on 10" rims on all corners. Might want to look at the BFG G-Force Comp2 Tires. I had the Invos and they did look a little stretched. I did not like them and switched to the BFG G-force because they have a little wider thread width than the Invos. I am much happier.