I'm looking for concaved 5 spoke wheel that won't break the bank!

[ihaveacamaro]

Originally Posted by flyinlow89

Don't have the pics that you're asking for. These angles may help a bit with the fitment. One guy needed spacers only because he wanted to run a 10.5" on front so he got a more concave look going on...much like the rear. But if you run 9.5 front and 10.5 rear theres no need for spacers. I can take better pics Thursday if I remember

Looks great!

[JRT]

Originally Posted by flyinlow89

Don't have the pics that you're asking for. These angles may help a bit with the fitment. One guy needed spacers only because he wanted to run a 10.5" on front so he got a more concave look going on...much like the rear. But if you run 9.5 front and 10.5 rear theres no need for spacers. I can take better pics Thursday if I remember

Dude that does look really good! If your ride IOM or red? Sometimes it is so hard to tell.
20x9 and 20x10.5 Stance SC5? If I remember right reading one of your threads you are running stock tires or did you change them? How far out does that rear wheel stick out past the fender? Is that an optical illusion?

So I am assuming that 275/40 and 315/35 should work!
Hmmm black when a machined face or like what you have.

[flyinlow89]

IOM. Ya it looks red in the pics. Escpecially since they're just iPhone pics. I included one where u can seethe colour better lol.
I did use stock tires but they stretch a bit. Would look much better with wider tires. Wheels do no stick past the fender they're actually pretty good. Less than flush. As for tires the offset is a bit too aggressive for a 315 from what I understand. Look into a 295 or 305.
I'd go with the black/machined. They will look larger because the inner barrel is black instead of silver like mine which makes them look a tad smaller. I wanted a chrome lip tho. When I ordered the silver I didn't realize te black/machined also came with the chrome lip

[Stefwilli]

The stance would fit the budget perfectly but will poke out past the fender some with the 25 offset.

[JRT]

I do like the SC5's better then the Vossen's for some reason. I think it is the lip that makes the difference. And at a little less then $400/wheel that is a nice price!

It would suck if the 315 didn't work! I need to run an all season tire and Nitto Motivos are nice tire at a good price. They have good grip and are a 60,000 tire. The 275/40 are like $230 each and the 315/35 are $250 each. Big price difference over the non-all-season tires at 500 a pop! the motivos do not come in a 295 or 305 so that sucks. Plus I want that fat 315 look! But, I am not opposed to another brand

[flyinlow89]

Originally Posted by Stefwilli

The stance would fit the budget perfectly but will poke out past the fender some with the 25 offset.

They don't

[SUX2BU]

Originally Posted by flyinlow89

They don't

It looks like they stick out in the pictures and with all the offset measuring I have done a 10.5" wide 25mm offset wheel will stick out. Take a picture like this and you will see for yourself.

[JRT]

I knew I wasn't crazy and read that they required a spacer somewhere...http://www.camaro5.com/forums/showpo...6&postcount=83

Well Greg at Wheel Warehouse says they fit over the Brembos without a spacer, but they are an aggressive fit. The sizes are:
20x9 - 23mm offset
20x10.5 - 30mm offset

Have they changed their offset? I would love more detail so I will keep looking. I'm not buying until I get back from vacation anyways so I have time to work it out anyway.

This readout shows they will move out 1.1"F/1.2"R.

Front



Rear

[oldfriend]

Originally Posted by SUX2BU

It looks like they stick out in the pictures and with all the offset measuring I have done a 10.5" wide 25mm offset wheel will stick out. Take a picture like this and you will see for yourself.

Yep , the garage door is on the money with the broom stick .

[SUX2BU]

Originally Posted by oldfriend

Yep , the garage door is on the money with the broom stick .

[JRT]

I don't know...it looks about a 1/4" out at the top!

[Pay2Play]

Bavaria BC5:
RS / LS / SS fitment
20x8"
20x10.5"



These are made by Nutek and are one piece, low pressure cast wheels. I haven't seen them actually on a Camaro yet, but I think they will look great.

[JRT]

Thanks for posting these. They are nice, but they say Bravaria on the spoke...not cool for a Camaro! And they only have 8" for the front...to small!

This may be shopped, but these do look really good!

[flyinlow89]

I must be cross eyed because It doesn't look like the wheels stick out past the fender. But who am I to argue with someones calculations.
I guess I shouldve borrowed sux's magical broom stick with built-in level