ZL1 #140 starting mods - Page 6 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

MrDew · 07-29-2012, 01:56 AM

Quote:

Originally Posted by 1st Gen Forever

Might have to just jump straight to a Whipple!

Dibbs on the ported blower!

either way i love watching the progress on your build...

1st Gen Forever · 07-29-2012, 02:02 AM

Quote:

Originally Posted by MrDew

Do you mind sharing some pictures of your ported blower? m curious to see how it looks?
(of course only if it is ok with KDi)

Not ok with KDi :(

MrDew · 07-29-2012, 01:21 PM

Man, there's a ton of work especially in the inlet. The blower body looks a lot easier but I'm sure that's tedious work with all those deep runners and places they need to get to...

How does the blower seal against the heads? Will those green gaskets still be used or do you need a sealer now too?

P.s. how did your heat exchanger look like? Not sure how many miles you made before tearing into it but im curious if there was any oil on it...

2012ZL1 · 07-29-2012, 08:30 PM

Quote:

Originally Posted by 1st Gen Forever

Possibly not.

I should have some new pictures up this weekend. going back together with the heads and ported blower.

Whoops, Just re-read my post. I didn't mean for that to come out the way it did, sorry.
Nice pictures of the work.
Awesomw thread.

*radz28* · 07-29-2012, 10:25 PM

You were not kidding about those heads not being stealth, lol!!!

Yeah - 12mm for LS9s I believe :(

LOOKING F'ING GREAT!!!

sammyv · 07-30-2012, 08:35 AM

Serious port work, can't wait to see the finished product!

1st Gen Forever · 07-30-2012, 03:15 PM

Factory green blower manifold to head intake port gasket is re-used. The only port they made larger than the gasket in my application is the throttle body inlet. I requested that so I could use the Nick Williams 102mm throttle body. KDi can still port the whole blower while leaving the throttle body set up for smaller ones between stock and the 102 if you desire.

FUN2RUN · 07-30-2012, 08:36 PM

interesting....
subscribed

2012ZL1 · 08-02-2012, 01:55 PM

I'm wondering why there is a vane in the cyl heads at all. I could see for n/a, but FI? what good is a vane? Is it just for fuel economy or emissions or? Does anyone know?
Also what is the butterfly seen in the inlet housing. That seems to be a big restriction to flow right there. Is it the boost bypass? If it is I know what's happening to mine when I get in there...

1st Gen Forever · 08-02-2012, 10:52 PM

The butterfly in the inlet housing of the supercharger is a bypass. You aren't running under boost all the time.

On the vane in the cyl head of the LSA, I'm not 100% sure but I think it aids in mid-lift flow.

Edit: After doing some more research it simply seems that the "Swirl-Wing technology" as GM calls it simply improves fuel atomization.

2012ZL1 · 08-03-2012, 12:59 AM

anybody know the part number for bare lsa head?

1st Gen Forever · 08-03-2012, 05:37 PM

Quote:

Originally Posted by 2012ZL1

anybody know the part number for bare lsa head?

Try GMPP 12626958

2012ZL1 · 08-04-2012, 09:47 AM

Ah yes i tried that one earlier, but that is the complete head assy. I found the number now I think.
I am going to have them ported, and put in some better hardware..
I just ordered my cam etc., so thank you for your pics etc. you posted in this thread. it looks like I will be going knees deep into my engine compartment soon also..

1st Gen Forever · 08-04-2012, 12:04 PM

Quote:

Originally Posted by 2012ZL1

Ah yes i tried that one earlier, but that is the complete head assy. I found the number now I think.
I am going to have them ported, and put in some better hardware..
I just ordered my cam etc., so thank you for your pics etc. you posted in this thread. it looks like I will be going knees deep into my engine compartment soon also..

Nice! Share the details with us as you progress. Would be cool to compare notes. I wouldn't mind comparing cam specs with you and why you chose what you did...

07-29-2012, 10:25 PM	#75
radz28 Petro-sexual Drives: Ultra-Grin Join Date: Oct 2006 Location: Crazy Coast Posts: 15,809 View My Garage	You were not kidding about those heads not being stealth, lol!!! Yeah - 12mm for LS9s I believe :( LOOKING F'ING GREAT!!! __________________ '20 ZL1 Black "Fury" A10, PDR, Exposed CF Extractor Magnuson Magnum DI TVS2650R // RFBG // Soler 103 // TooHighPSI Port Injection // THPSI Billet Lid // FF // Katech Drop-In // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs

08-02-2012, 10:52 PM	#80
1st Gen Forever ZL1 #140 Drives: Camaros: 68 SS, 10 2SS/RS, 12 ZL1 Join Date: Mar 2008 Location: Arizona Posts: 594	The butterfly in the inlet housing of the supercharger is a bypass. You aren't running under boost all the time. On the vane in the cyl head of the LSA, I'm not 100% sure but I think it aids in mid-lift flow. Edit: After doing some more research it simply seems that the "Swirl-Wing technology" as GM calls it simply improves fuel atomization. Last edited by 1st Gen Forever; 08-04-2012 at 12:04 PM.

07-29-2012, 01:21 PM	#73
MrDew Drives: 2012 ZL1 #165 Join Date: Apr 2009 Location: Switzerland (no longer Houston, TX) :-( Posts: 479 View My Garage	Man, there's a ton of work especially in the inlet. The blower body looks a lot easier but I'm sure that's tedious work with all those deep runners and places they need to get to... How does the blower seal against the heads? Will those green gaskets still be used or do you need a sealer now too? P.s. how did your heat exchanger look like? Not sure how many miles you made before tearing into it but im curious if there was any oil on it...

07-30-2012, 08:35 AM	#76
sammyv Drives: 2013 red Lingenfelter ZL1 Join Date: Apr 2012 Location: zionsville IN Posts: 567	Serious port work, can't wait to see the finished product!

07-30-2012, 03:15 PM	#77
1st Gen Forever ZL1 #140 Drives: Camaros: 68 SS, 10 2SS/RS, 12 ZL1 Join Date: Mar 2008 Location: Arizona Posts: 594	Factory green blower manifold to head intake port gasket is re-used. The only port they made larger than the gasket in my application is the throttle body inlet. I requested that so I could use the Nick Williams 102mm throttle body. KDi can still port the whole blower while leaving the throttle body set up for smaller ones between stock and the 102 if you desire.

07-30-2012, 08:36 PM	#78
FUN2RUN Banned Drives: finding 2013 Join Date: Jul 2012 Location: Vegas Posts: 23	interesting.... subscribed

08-02-2012, 01:55 PM	#79
2012ZL1 CaRaHoLiC Drives: '12 ZL1,67 Cam,68 Biscayne 427 4 sp Join Date: Aug 2011 Location: B.C. Canada Posts: 1,701	I'm wondering why there is a vane in the cyl heads at all. I could see for n/a, but FI? what good is a vane? Is it just for fuel economy or emissions or? Does anyone know? Also what is the butterfly seen in the inlet housing. That seems to be a big restriction to flow right there. Is it the boost bypass? If it is I know what's happening to mine when I get in there...

08-03-2012, 12:59 AM	#81
2012ZL1 CaRaHoLiC Drives: '12 ZL1,67 Cam,68 Biscayne 427 4 sp Join Date: Aug 2011 Location: B.C. Canada Posts: 1,701	anybody know the part number for bare lsa head?

08-04-2012, 09:47 AM	#83
2012ZL1 CaRaHoLiC Drives: '12 ZL1,67 Cam,68 Biscayne 427 4 sp Join Date: Aug 2011 Location: B.C. Canada Posts: 1,701	Ah yes i tried that one earlier, but that is the complete head assy. I found the number now I think. I am going to have them ported, and put in some better hardware.. I just ordered my cam etc., so thank you for your pics etc. you posted in this thread. it looks like I will be going knees deep into my engine compartment soon also..