419 Stroker Supercharged 740 hp will be for sale - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Allanski · 08-06-2012, 10:41 AM

NO longer for sale - only Maggie and extras in another thread.

This Engine pulled 740 rwhp and 10.9 seconds in the quarter with a bad throttle body. Its out of the car now getting new cam bearings and full inspection and upgraded throttle body. Its going back in the camaro until the fall then it will be for sale.

419 stroker kit
Custom 9.2 to 1 diamond pistons
Callies crankshaft
Callies connecting rods
ARP hardware
Ported LS3 heads with Manley stainless steel valves,
Vinci performance dual springs, titanium retainers, locks, pushrods
Custom SPI camshaft dur @ .050 lift int 250 exh 266 LSA 115 lift .624
Magnacharger polished TVS 2300 with rear O.D cog belt, 3.0” pulley,
Jannetty max package stage 2 with Nick Williams 102mm throttle body
or TPIS 102 throttle body
I.D 1000 fuel injectors
ADM dual fuel pump
Alcohol Injections meth kit
8 rib belt conversion with tensioner upgrade
Dynatech long tube headers available

Name: 419.JPG
Views: 2872
Size: 81.5 KB

Engine had 1000 street miles and 16 runs at the track, you will be able to see it running.
We are building a new crate engine. What would it cost you to build this and save 20-30% Taking serious offers and will ship to your door.

BlAcK MaMbA SS · 08-07-2012, 12:06 PM

Will this kit fit on a L99 ?

Allanski · 08-07-2012, 12:11 PM

This is not a kit - its the whole engine bolted onto a 4l80 auto transmission(not included).
Buy it and sell your L99.

kenkartasasmita · 08-07-2012, 12:19 PM

this is a ls3 or l99 engine?

Falundir · 08-07-2012, 01:55 PM

I'll offer you 40 hours of Computer Forensics and eDiscovery consulting services =).

(I hope you don't actually need them, but had to try

.

daveagogo1 · 08-07-2012, 02:17 PM

Guys. Even if it was an L99 at one point it certainly no longer is considering the entire valvetrain upgrade , pistons & rods, heads , crank and cam. And it's stroked to 419.

Awesome build. Only wish i could buy.

GLWS.

dekan513 · 08-07-2012, 02:52 PM

consider spliting the charger from the engine?

Kyle2k · 08-07-2012, 03:36 PM

How much are you looking at for this engine?

rakanet · 08-07-2012, 05:16 PM

pm me the price ...

camslambam · 08-07-2012, 07:24 PM

If you decide to take the charger away from engine, PM me what you want for engine.

SUX2BU · 08-07-2012, 07:40 PM

Quote:

Originally Posted by kenkartasasmita

this is a ls3 or l99 engine?

Neither.

SUX2BU · 08-07-2012, 07:41 PM

Quote:

Originally Posted by Allanski

This Engine pulled 740 rwhp and 10.9 seconds in the quarter with a bad throttle body.

Any videos? Please say yes, please say yes, please say yes!

Allanski · 08-07-2012, 10:07 PM

Yes we have videos but again the throttle body issues caused bogging at the start.

Yes we will split engine from Maggie. As I said only posting right now to get interested parties as the fresh engine is tuned and dynoed and new times at the track to prove it performs... and it does!

by the way the maggie comes with a ported spacer, 8 rib and a torq heat exchanger!! ya

Videos are downloading will post shortly.

hcoll003 · 08-07-2012, 11:26 PM

Do you have any idea of price? Please PM me, thank you!

08-06-2012, 10:41 AM	#1
Allanski Drives: Car Join Date: Jul 2009 Location: Burlington Ontario Canada Posts: 750 View My Garage	419 Stroker Supercharged 740 hp will be for sale NO longer for sale - only Maggie and extras in another thread. This Engine pulled 740 rwhp and 10.9 seconds in the quarter with a bad throttle body. Its out of the car now getting new cam bearings and full inspection and upgraded throttle body. Its going back in the camaro until the fall then it will be for sale. 419 stroker kit Custom 9.2 to 1 diamond pistons Callies crankshaft Callies connecting rods ARP hardware Ported LS3 heads with Manley stainless steel valves, Vinci performance dual springs, titanium retainers, locks, pushrods Custom SPI camshaft dur @ .050 lift int 250 exh 266 LSA 115 lift .624 Magnacharger polished TVS 2300 with rear O.D cog belt, 3.0” pulley, Jannetty max package stage 2 with Nick Williams 102mm throttle body or TPIS 102 throttle body I.D 1000 fuel injectors ADM dual fuel pump Alcohol Injections meth kit 8 rib belt conversion with tensioner upgrade Dynatech long tube headers available Engine had 1000 street miles and 16 runs at the track, you will be able to see it running. We are building a new crate engine. What would it cost you to build this and save 20-30% Taking serious offers and will ship to your door. Last edited by Allanski; 08-13-2012 at 09:17 PM. Reason: No longer for sale as listed

08-07-2012, 12:06 PM	#2
BlAcK MaMbA SS Drives: 2011 Chevrolet Camaro SS RS L99 Join Date: May 2011 Location: San Diego, California/Mazatlan, Sinaloa Posts: 372 View My Garage	Will this kit fit on a L99 ? __________________ CrushingAllMustangAndRiceOwners

08-07-2012, 02:52 PM	#7
dekan513 chevy pride Drives: 2ss/rs Join Date: Feb 2012 Location: pikeville ky Posts: 2,141 View My Garage	consider spliting the charger from the engine? __________________ check out ky speeds fb page https://www.facebook.com/kyspeed

08-07-2012, 03:36 PM	#8
Kyle2k LVL 50 Troll Stomper Drives: 2010 Camaro Join Date: Feb 2008 Location: Indianapolis Posts: 3,463	How much are you looking at for this engine? __________________

08-07-2012, 12:11 PM	#3
Allanski Drives: Car Join Date: Jul 2009 Location: Burlington Ontario Canada Posts: 750 View My Garage	This is not a kit - its the whole engine bolted onto a 4l80 auto transmission(not included). Buy it and sell your L99.

08-07-2012, 01:55 PM	#5
Falundir Drives: 2017 1SS 1LE - Hyper Blue, P85DL Join Date: Jul 2011 Location: East Bay Posts: 2,189 View My Garage	I'll offer you 40 hours of Computer Forensics and eDiscovery consulting services =). (I hope you don't actually need them, but had to try .

08-07-2012, 05:16 PM	#9
rakanet Drives: Camaro 2011 ss Join Date: Feb 2009 Location: FL Posts: 53	pm me the price ...

08-07-2012, 07:24 PM	#10
camslambam Account Suspended Drives: 2010 SS, 06 SRT10 Ram Join Date: Nov 2011 Location: C. America Posts: 1,658	If you decide to take the charger away from engine, PM me what you want for engine.

08-07-2012, 10:07 PM	#13
Allanski Drives: Car Join Date: Jul 2009 Location: Burlington Ontario Canada Posts: 750 View My Garage	Yes we have videos but again the throttle body issues caused bogging at the start. Yes we will split engine from Maggie. As I said only posting right now to get interested parties as the fresh engine is tuned and dynoed and new times at the track to prove it performs... and it does! by the way the maggie comes with a ported spacer, 8 rib and a torq heat exchanger!! ya Videos are downloading will post shortly.

08-07-2012, 11:26 PM	#14
hcoll003 Proven Wicked Suspension Drives: 2010 Camaro 2SS/RS Join Date: Mar 2011 Location: Florida Posts: 580 View My Garage	Do you have any idea of price? Please PM me, thank you!