ADM Performance 427 Whipple Auto 740rwhp/ 700tq - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

FloMoCamaro · 08-13-2012, 10:45 PM

Quote:

Originally Posted by SSMagna

Very nice!

I always enjoy Andy's builds, more times than not it's a first time done. I'm on my third motor also! I think third times a charm. The LSX427 is just hard to beat. The best thing I like is the detail. The build detail is enough to win at the car shows but the power it puts out is enough to win at the drag strip!

Congrats! Why don't you plan on going to the Camaro Nationals in Houston with Keith and I? It would be a great place to put down that 9 second run.

I'm in Chris, sounds like a lot of fun

Camaro21 · 08-14-2012, 09:03 AM

Quote:

Originally Posted by FloMoCamaro

I'm in Chris, sounds like a lot of fun

, It should be a good time for sure.. The H-Town Camaro Club are Awesome People !!

firefighter1 · 08-14-2012, 11:14 AM

My hunting trip this fall was cancelled. damn fires in colorado! SO i have an opening for going to ... what is this called again.. OH yeah the camaro nationals!!!!

Camaro21 · 08-14-2012, 11:33 AM

Quote:

Originally Posted by firefighter1

My hunting trip this fall was cancelled. damn fires in colorado! SO i have an opening for going to ... what is this called again.. OH yeah the camaro nationals!!!!

and it's called "TEXAS Camaro Nationals"!!!

FloMoCamaro · 08-14-2012, 11:37 AM

Sounds like an ADM envation. Maybe we can get Andy and others to get a weekend pass and hang out with good folks down in Houston...

Camaro21 · 08-14-2012, 11:40 AM

Quote:

Originally Posted by FloMoCamaro

Sounds like an ADM envation. Maybe we can get Andy and others to get a weekend pass and hang out with good folks down in Houston...

That would be AWESOME !!

fcu678 · 08-14-2012, 01:39 PM

Looks awesome FLO!!!! Another Great build Andy!!!!

I can't keep up with you guys but we may try to make it to the Camaro Nationals.

Hey FLO what did you do with the 417??

FloMoCamaro · 08-14-2012, 01:46 PM

Sold it

ADM PERFORMANCE · 08-14-2012, 07:22 PM

Quote:

Originally Posted by FloMoCamaro

Sold it

I have more in stock though

SSMagna · 08-14-2012, 10:05 PM

Quote:

Originally Posted by firefighter1

My hunting trip this fall was cancelled. damn fires in colorado! SO i have an opening for going to ... what is this called again.. OH yeah the camaro nationals!!!!

Great! Be sure to groom up before you head that way! The cameras may be rolling again!

It should be a great weekend!

800+ CTS-V · 08-14-2012, 10:25 PM

Quote:

Originally Posted by FloMoCamaro

This is our 3rd build with FloMoCamaro - and what a unique build it is. Yet another great design and build by Andy at ADM Performance customizing the CTS-V / ZL1 belt drive system. The torque on this build is nothing short of spectacular - 700lbs @ 4000rpm. The goal was not about the peak number that most get caught up on, but rather, the torque curve. While we only gained about 20 more peak horsepower, we gained an amazing 60-80lbs of torque throughout most of the curve. The car is just so much more responsive. It's like nite & day - all I can say is WOW!!! We left some wiggle room to grow with the blower pulley sizes and decided to stay a little conservative for now to see what we get at the track. After all, the car is still a daily driver, but can't wait to get it back to the track when the weather cools down a bit.

Build #1 - L99/LS3 Conversion, Stage 2 Cam, Maggie - 650rwhp/580tq
Build #2 - Lingenfelter 417, Stage 3 Cam, Whipple - 720rwhp/650tq
Build #3 -

LSX 427
Forged Crank, Rods & Pistons
Stage 3 Cam
Whipple 2900 Supercharger @ 15-16lbs. Boost
LSA Belt Drive Assembly
4 Rib A/C
6 Rib Power Steering, Water Pump & Alternator
10 Rib Supercharger Pulley

ADM Dual Fuel Pump & ID 850 Injectors

Sweet build. What size and brand throttle body is that?

white ZL1 · 08-15-2012, 06:47 AM

I was waiting to hear when this was done. Nice job Andy and FloMo....can't wait to see it run!

FloMoCamaro · 08-15-2012, 08:14 AM

Quote:

Originally Posted by 800+ CTS-V

Sweet build. What size and brand throttle body is that?

It's a Nick Wiliams 102 Throttle dodgy - love it!!! Gave me an extra 30rwhp when we put on the 417.

Xander · 08-15-2012, 11:16 AM

Congrats Mike ,Andy did another sweet build!!

08-14-2012, 11:14 AM	#17
firefighter1 Drives: 625 rwhp red jewel ss COTW 11-8-10 Join Date: Oct 2009 Location: Abilene, Texas Posts: 824	My hunting trip this fall was cancelled. damn fires in colorado! SO i have an opening for going to ... what is this called again.. OH yeah the camaro nationals!!!! __________________

08-14-2012, 11:37 AM	#19
FloMoCamaro Drives: 2010 Camaro SS Join Date: Dec 2009 Location: Flower Mound, TX Posts: 490 View My Garage	Sounds like an ADM envation. Maybe we can get Andy and others to get a weekend pass and hang out with good folks down in Houston... __________________

08-14-2012, 01:39 PM	#21
fcu678 5Th Gen (Craig) Drives: 2014 C7 Join Date: Oct 2008 Location: Houma, Louisiana Posts: 766 View My Garage	Looks awesome FLO!!!! Another Great build Andy!!!! I can't keep up with you guys but we may try to make it to the Camaro Nationals. Hey FLO what did you do with the 417?? __________________ 2014 C7

08-14-2012, 01:46 PM	#22
FloMoCamaro Drives: 2010 Camaro SS Join Date: Dec 2009 Location: Flower Mound, TX Posts: 490 View My Garage	Sold it __________________

08-15-2012, 11:16 AM	#28
Xander Drives: ADM Built 740RWHP 2SS/RS Join Date: Feb 2010 Location: DFW Posts: 255	Congrats Mike ,Andy did another sweet build!! __________________ ADM built 610 RWHP 2011 2SS/RS

08-15-2012, 06:47 AM	#26
white ZL1 Drives: none Join Date: Aug 2011 Location: DFW area Posts: 1,844	I was waiting to hear when this was done. Nice job Andy and FloMo....can't wait to see it run!