Camaro 5 Muscle SoFla Original - Page 27 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

nUcLeArEnVoY · 08-16-2012, 09:48 AM

Can't wait until this hood is on my car (sans the silly vents). It can't ship out fast enough!!! ^^^^^^^

STUGGOTS · 08-16-2012, 09:51 AM

Quote:

Originally Posted by nUcLeArEnVoY

Can't wait until this hood is on my car (sans the silly vents). It can't ship out fast enough!!! ^^^^^^^

Robert that going to look sick can't wait to see it.

nUcLeArEnVoY · 08-16-2012, 10:12 AM

Quote:

Originally Posted by STUGGOTS

Robert that going to look sick can't wait to see it.

Yep. That combined with the Hugger Orange rally stripe look I want, I'll be really kickin' it old school hot rod style.

This is how I want my rally stripes done (these are painted, but you get the idea):

Maybe an inch or so thinner. It should be an easy job for that Superior Automotive Design place I'm bringing the car to. The stripes go straight down and have no taper whatsoever, not to mention I'm supplying the vinyl. We'll see how it goes!

STUGGOTS · 08-16-2012, 10:23 AM

Quote:

Originally Posted by nUcLeArEnVoY

Yep. That combined with the Hugger Orange rally stripe look I want, I'll be really kickin' it old school hot rod style.

This is how I want my rally stripes done (these are painted, but you get the idea):

Maybe an inch or so thinner. It should be an easy job for that Superior Automotive Design place I'm bringing the car to. The stripes go straight down and have no taper whatsoever, not to mention I'm supplying the vinyl. We'll see how it goes!

Kris from Superior Automotive does great work i've seen a few things he's done and there flawless you won't be disapointed.

nUcLeArEnVoY · 08-16-2012, 10:24 AM

SPRINGS ARE ORDERED!

They'll contact me as soon as they come in (should be tomorrow).

Have we planned an official date next week for the group install? Maybe Saturday?

Agarc · 08-16-2012, 10:45 AM

so u screw me on the group buy dam u robert

STUGGOTS · 08-16-2012, 10:59 AM

Guys and Gals we'll be metting today at 6:30pm to 6:45pm at the empty lot across from burger king and next to turnpike and chevy dealer so we could roll in together.

copper98 · 08-16-2012, 11:33 AM

Quote:

Originally Posted by nUcLeArEnVoY

SPRINGS ARE ORDERED!

They'll contact me as soon as they come in (should be tomorrow).

Have we planned an official date next week for the group install? Maybe Saturday?

I am teaching a course Saturday & Sunday Maybe during the end of the week before the weekend?

nUcLeArEnVoY · 08-16-2012, 11:38 AM

Quote:

Originally Posted by copper98

I am teaching a course Saturday & Sunday Maybe during the end of the week before the weekend?

Would this weekend be too little notice? Especially Sunday? It would be perfect for me since Sunday is usually the day me and my girlfriend spend time together, but she got called in for work. Assuming I am able to get the springs tomorrow, would Sunday be alright?

If not, then I'll be available Tuesday or Thursday of next week.

copper98 · 08-16-2012, 12:21 PM

Quote:

Originally Posted by nUcLeArEnVoY

Would this weekend be too little notice? Especially Sunday? It would be perfect for me since Sunday is usually the day me and my girlfriend spend time together, but she got called in for work. Assuming I am able to get the springs tomorrow, would Sunday be alright?

If not, then I'll be available Tuesday or Thursday of next week.

I rarely work on the weekend myself unless i am teaching or traveling. This weekend I working on Sunday and next weekend I have to work both days. I have some time during the week and can even do it during the afternoon not a problem. If we do it next week I just would prefer toward thursday or friday because this would give time to create my presentation.

We could do it this saturday but we have a show on saturday night??? We can do maybe one car on Saturday Morning Early?

I am looking forward to turning wrenches again.

copper98 · 08-16-2012, 12:28 PM

Dani is missing in action. I think he is hiding under his airbag

Agarc · 08-16-2012, 12:30 PM

his air bag popped and knocked him out

Agarc · 08-16-2012, 12:35 PM

there thats sorta better my avatar with a little cut and paste lol

nUcLeArEnVoY · 08-16-2012, 12:58 PM

I can do Saturday - the only reason I didn't recommend it was because of Sir Pizza. Here's my opinion on that, though: since we're doing the thing @ Metro Zoo tonight, I think we should just skip Sir Pizza. The 1st of the month one is more enjoyable anyway, since it includes both classic and modern cars while the one coming up is just modern cars I could see at dealerships. LOL

If I'm able to have the springs picked up tomorrow, then I'm fine w/ Saturday. What kind of tools do you have so I know what I need to bring, if any?

Dani said you had air tools such as an impact, etc which is great. I can't even begin to explain how much easier that'll make this. When I installed my springs, I used standard tools and vowed I'd never do it again.

Lemme know what you have - I can supply a jack/jack stands and standard mechanic tools.

08-16-2012, 10:45 AM	#370
Agarc Dr.Frankenstein Drives: 15gt Join Date: Jul 2011 Location: MIA Posts: 1,568 View My Garage	so u screw me on the group buy dam u robert __________________ Carandsoulcustoms puntocomm

08-16-2012, 10:59 AM	#371
STUGGOTS Account Suspended Drives: 2010 CAMARO SS/RS Join Date: Jun 2010 Location: MIAMI Posts: 182 View My Garage	Metro Zoo night hangout Guys and Gals we'll be metting today at 6:30pm to 6:45pm at the empty lot across from burger king and next to turnpike and chevy dealer so we could roll in together.

08-16-2012, 12:28 PM	#375
copper98 Camaro 5 Muscle Drives: 2012 CAMARO 2SS/RS Join Date: Feb 2012 Location: Miami Posts: 1,152 View My Garage	Dani is missing in action. I think he is hiding under his airbag __________________ Mods: Air Raid C.A.I., Custom Ported/Polished Throttle Body, Kooks 1 7/8 Headers, Dyno Tuned , LPE 3.91 Gears, BMR Differential Bushings, R/X Oil Catch Can, X-Pipe, Borla Exhaust, MGW Shifter, Hawk-HPS, SS brake lines, BMR front & rear sway bars, BMR rear sway bar end links, Pedders front radius rod bushings, Spohn front sway bar end links, BMR rack/pinion bushing, BMR Coils 1" drop, BMR Trailing Arm, BMR Toe Rods, Pedders Sub-Frame bushings, BMR Sub-frame Connectors, BMR Driveshaft Tunnel Braces, GM Strut tower brace, custom painted bowties

08-16-2012, 12:30 PM	#376
Agarc Dr.Frankenstein Drives: 15gt Join Date: Jul 2011 Location: MIA Posts: 1,568 View My Garage	his air bag popped and knocked him out __________________ Carandsoulcustoms puntocomm

08-16-2012, 12:35 PM	#377
Agarc Dr.Frankenstein Drives: 15gt Join Date: Jul 2011 Location: MIA Posts: 1,568 View My Garage	there thats sorta better my avatar with a little cut and paste lol __________________ Carandsoulcustoms puntocomm

08-16-2012, 09:48 AM	#365
nUcLeArEnVoY Oldbie that nobody knows Drives: 2011 1SS/RS M6 Join Date: Jun 2008 Location: Homestead, FL Posts: 3,459 View My Garage	Can't wait until this hood is on my car (sans the silly vents). It can't ship out fast enough!!! ^^^^^^^

08-16-2012, 10:24 AM	#369
nUcLeArEnVoY Oldbie that nobody knows Drives: 2011 1SS/RS M6 Join Date: Jun 2008 Location: Homestead, FL Posts: 3,459 View My Garage	SPRINGS ARE ORDERED! They'll contact me as soon as they come in (should be tomorrow). Have we planned an official date next week for the group install? Maybe Saturday?

08-16-2012, 12:58 PM	#378
nUcLeArEnVoY Oldbie that nobody knows Drives: 2011 1SS/RS M6 Join Date: Jun 2008 Location: Homestead, FL Posts: 3,459 View My Garage	I can do Saturday - the only reason I didn't recommend it was because of Sir Pizza. Here's my opinion on that, though: since we're doing the thing @ Metro Zoo tonight, I think we should just skip Sir Pizza. The 1st of the month one is more enjoyable anyway, since it includes both classic and modern cars while the one coming up is just modern cars I could see at dealerships. LOL If I'm able to have the springs picked up tomorrow, then I'm fine w/ Saturday. What kind of tools do you have so I know what I need to bring, if any? Dani said you had air tools such as an impact, etc which is great. I can't even begin to explain how much easier that'll make this. When I installed my springs, I used standard tools and vowed I'd never do it again. Lemme know what you have - I can supply a jack/jack stands and standard mechanic tools.