Most usefull Mod ?

[BaylorCamaro]

Super Charger, lol.

[Neumatic]

Skip shift eliminator, I hated getting locked out of gears. By the time it didn't go into second it was too late to go to fourth. So it has kept my sanity intact.

[H0peful1]

Originally Posted by ulmerc

Custom made rear cup holder

I've been thinking I'm going to need a rear cup holder! Where'd you get yours?

[ihaveacamaro]

Personally I'm a fan of GTAHVIT, but STIEGER is really good too!

[tjd24]

#1 - Sport Sway Bars from Pfadt - amazing what a difference in cornering/curves - like the Camaro is on rails.

#2 - Cat-back Exhaust - Solo Performance - gave my A6 Camaro the growl under power it was missing with OE

#3 - Plasma DRL from AAC - got rid of the yellowish DRL OE - now blueish white to match the HIDs (get the harness to allow the DRLs to stay on when lights are on). Also replace the Yellow turn-signal bulbs with Mirror Bulbs which show yellow only when on - need Bulb #3457 - available from http://www.stealthauto.com/Products/...ALTHBULBS.aspx

[JustCraig]

Originally Posted by H0peful1

I've been thinking I'm going to need a rear cup holder! Where'd you get yours?

Designed it myself, and have access to a 3D printer at work. I can probably get a few more made. If you want something that looks new and shiny, I've seen some that go for around $50. These are a little rough, but can be a project, or used as-is. I can also add custom details, perhaps text debossed in the bottom, or embossed on the sides. Will probably round the corners as well. PM me if you'd like one, you'd just need to cover shipping, and I DO accept donations

[two_wheel_mayhem]

Originally Posted by jph2275

There ya go: Exact one I got. Great pice, all OEM pieces....



http://www.ebay.com/itm/10-11-12-CHE...#ht_1279wt_907

It says it doesn't work on V8 cars, so if you have the Brembos you are carrying around this spare for nothing except added weight.

[jph2275]

Originally Posted by two_wheel_mayhem

It says it doesn't work on V8 cars, so if you have the Brembos you are carrying around this spare for nothing except added weight.

That's why you get an adapter as I mentioned in my first post

[two_wheel_mayhem]

Originally Posted by jph2275

That's why you get an adapter as I mentioned in my first post

Well where's the adapter?

[jph2275]

Originally Posted by two_wheel_mayhem

Well where's the adapter?

Figured people would search.

Borrowed from another thread courtesy of SUX2BU:

Originally Posted by SUX2BU

They have to be custom made. There are many shops that sell them on Ebay (not the size we need) just call them up and tell them what you want or just Google "hubcentric wheel adapter".
Size is 5x120mm (NOT 5x120.7mm or 5x4.75" VERY IMPORTANT).
Center bore is 66.9 mm.
The thickness is 1.75" if you don't have roller skate brakes or 2.5" if you do.

I'll reference his very helpful thread here about it

http://www.camaro5.com/forums/showthread.php?t=145475

[RubyCamaro]

A tie between Borla exhaust & CAI inc cold air intake.

[two_wheel_mayhem]

Originally Posted by jph2275

Figured people would search.

Borrowed from another thread courtesy of SUX2BU:



I'll reference his very helpful thread here about it

http://www.camaro5.com/forums/showthread.php?t=145475

Thanks, glad to see someone has come up with something that works, and looks safe.

[SSDan]

Cam/bolt-on package - in use every time I start her up!

[rdaggett]

muff delete, magnaflow comp series axle back, HF Cats, CAI and STS all use each time she roars to life ... and yes she really roars ...