PICS-2011 GM ZR1 Wheels on 2011 CamaroSS - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Inferno · 09-14-2012, 09:10 PM

Looks great....I always thought those were the right wheels for that car..

Could you provide offset measurements? ZR1 and stock.

Thanks in advance..
B

jameslk55 · 09-14-2012, 11:01 PM

Quote:

Originally Posted by Chris-HPS

With the low profile of the tires the Camaro needs to be lowered a little more, however this camaro looks badazz with this wheel/tire combo!

Is that Camaro already lowered?

rhunley14 · 09-14-2012, 11:02 PM

You took the wheels off my car lol

zslewis · 09-15-2012, 09:01 AM

Quote:

Originally Posted by jameslk350

Is that Camaro already lowered?

it doesnt look like its been lowered but I would let them say whether it has or has not for sure... the Yellow camaro in the background is mine and it has been lowered with pfadt lowering springs. even at a distance mine looks to be a lot lower than this one...

Jayrcr3 · 09-18-2012, 06:19 PM

1.4 front and 1.0 BMR springs would be the final touch on that combo. Oh, and a winning lottery ticket to pay for the wheels and tires.

camarostar2010 · 09-18-2012, 07:11 PM

i want these monsters on my car

Trackman · 09-18-2012, 08:23 PM

very interesting...subscribed

When your done that find out what the widest rim/tire combo in a 18" for draggin a ZL1.

BLACK10 · 09-18-2012, 11:30 PM

Looks awesome

WheelmanSS · 09-19-2012, 08:21 AM

That looks absolutely fantastic and nasty all at the same time.

Chris-HPS · 09-19-2012, 08:45 AM

The car already has a set of Eibach springs on it however I am not sure how much it is lowered. It is lowered a little already though. Also they do fit fine as I had it on the dyno last night with the wheels and tires on there and no issue's.

Chris

camarostar2010 · 09-19-2012, 10:51 AM

Chris dont forget little me. I am trying to run 345/25/20's if possible....ahhhhhh i am a fat tire addict !!!!

Russell James · 09-19-2012, 02:12 PM

With OE hub centric wheels, I'd want to make sure both vehicles had the same hub size. I thought the Vette used bigger hubs?

SwitchBlade · 09-25-2012, 11:55 AM

I was visiting the shop when he was putting these bad boys on. All I can say is the picture does not do it justice.

AriAri8100 · 09-25-2012, 01:34 PM

The design of your car exposing your status.Creating a highly productive reliable and safe law enforcement car requires staying up on the latest technology.Any museum would envy such a huge diversity.

09-14-2012, 09:10 PM	#15
Inferno Drives: Z06 Join Date: Apr 2009 Location: CA Posts: 90	Specs Looks great....I always thought those were the right wheels for that car.. Could you provide offset measurements? ZR1 and stock. Thanks in advance.. B

09-18-2012, 06:19 PM	#19
Jayrcr3 Drives: 2011 IOM 2SS/RS Join Date: Dec 2010 Location: Chatham, Illinois Posts: 756	1.4 front and 1.0 BMR springs would be the final touch on that combo. Oh, and a winning lottery ticket to pay for the wheels and tires. __________________ American Racing 1 7/8" Headers and Hi-Flow Cats, CAI cold air intake, Flowmaster AT exhaust, Vengeance Racing Stage 2 cam, VMax ported throttle body, TEA valve springs and titanium retainers, Trick Flow hardened pushrods, 180* T-stat, Comp Trunion kit, ZL1 Fuel Pump, ADM Fuel Pump Control Module, 20% window tint, Whipple Supercharger. Tuned by Mike Norris Motorsports. 656rwhp/584rwtq @10 PSI.

09-18-2012, 07:11 PM	#20
camarostar2010 Drives: 2011 SS Join Date: Nov 2011 Location: new jersey Posts: 379	i want these monsters on my car Attached Images

09-19-2012, 08:21 AM	#23
WheelmanSS Logic is dead Drives: 2010 Camaro 2SS/RS Join Date: May 2010 Location: Chicago, IL Posts: 1,804	That looks absolutely fantastic and nasty all at the same time. __________________ 2010 Camaro 2SS/RS (LS3) 573 RWHP 498 RWTQ - Vortech V3 Supercharger - Kooks Stepped Headers, Magnaflow 16580 - Suspension by Pfadt, Hotchkis. 2007 Trailblazer SS- Sold 2001 Trans Am WS6 431 RWHP 408 RWTQ - Sold 1994 Camaro Z28 - Sold

09-19-2012, 10:51 AM	#25
camarostar2010 Drives: 2011 SS Join Date: Nov 2011 Location: new jersey Posts: 379	Chris dont forget little me. I am trying to run 345/25/20's if possible....ahhhhhh i am a fat tire addict !!!! Attached Images Last edited by camarostar2010; 09-19-2012 at 11:32 AM. Reason: pics

09-14-2012, 11:02 PM	#17
rhunley14 Drives: Camaro SS Join Date: Oct 2009 Location: Monroe Ga Posts: 964 View My Garage	You took the wheels off my car lol

09-18-2012, 08:23 PM	#21
Trackman Drives: 67RS Camaro ,Black 2013 ZL1 Join Date: Jun 2010 Location: Alberta Posts: 1,408	very interesting...subscribed When your done that find out what the widest rim/tire combo in a 18" for draggin a ZL1.

09-18-2012, 11:30 PM	#22
BLACK10 Drives: 2010 CAMARO. 10.04@133mph, 1.4 60' Join Date: Jul 2009 Location: Lafayette, Louisiana Posts: 4,585	Looks awesome

09-19-2012, 08:45 AM	#24
Chris-HPS Drives: 2008Corvette Join Date: Feb 2012 Location: Ga Posts: 691	The car already has a set of Eibach springs on it however I am not sure how much it is lowered. It is lowered a little already though. Also they do fit fine as I had it on the dyno last night with the wheels and tires on there and no issue's. Chris

09-19-2012, 02:12 PM	#26
Russell James Drives: '15 SS 1LE, '69 Z28 drag car Join Date: Dec 2009 Location: Mich Posts: 4,482	With OE hub centric wheels, I'd want to make sure both vehicles had the same hub size. I thought the Vette used bigger hubs?

09-25-2012, 11:55 AM	#27
SwitchBlade Drives: 2010 1LT Camaro Silver Ice Join Date: Apr 2012 Location: Tennessee Posts: 118 View My Garage	I was visiting the shop when he was putting these bad boys on. All I can say is the picture does not do it justice. __________________

09-25-2012, 01:34 PM	#28
AriAri8100 Banned Drives: Ferrari458 Italian in red color Join Date: Sep 2012 Location: Canada Posts: 7	The design of your car exposing your status.Creating a highly productive reliable and safe law enforcement car requires staying up on the latest technology.Any museum would envy such a huge diversity.