Where to put a powerhorn?

[Chrome Camaro]

I currently have a power horn connected to under my hood. It is made of metal so it won't melt. I use it for get together a, it's on a switch. I want to add a larger and louder one, but the best one I could find is plastic. Where could I put this without it melting? It's 4" x 6".

[jeepguy_1980]

There is lots of space between the radiator and the grille. You just have to remove the black plate.

http://goo.gl/4CSH5

Besides what they pulled for that article, you may also want to remove the hood latch. Then you will have lots of room to work with.

[Chrome Camaro]

Great idea!! I had the same one! But sadly the speaker is to big, I would have to remove the bumper to fit in in there.... Any other ideas?

[DraggnFrameGMC]

The bumper comes off in about 15 minutes. Its cake. All you need is a torx bit, 10mm and a flat head.

[jeepguy_1980]

Originally Posted by Chrome Camaro

Great idea!! I had the same one! But sadly the speaker is to big, I would have to remove the bumper to fit in in there.... Any other ideas?

If you remove the hood latch, a 4x6" should fit.

[Chrome Camaro]

Originally Posted by jeepguy_1980

If you remove the hood latch, a 4x6" should fit.

I tried. It doesn't. It's to thick. It's like 6 to 8 inches deep. I've taken the bumper off before, so I'll just add it in next time. But thanks.