ZISL/PAC what else? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

fsckedagain · 09-11-2012, 01:15 PM

Non-BA system 2013 LS. Have a Fosgate 5 channel on the way and some Polk 6.5 DXi components on the way as well. Going to get Polk 6x9 DXi's in a couple days.

I know I need one or the other, don't know which one is for me.
Any insight into the pros and cons would be helpful.

What else am I going to need? I am going to get some FatMat. I know I need a dist block. But are there any opinions on the best way to get signal to the amp from the factory stereo?

Any special connectificators I need for the speakers? Wanting to keep it as clean and stealthy as possible with minimal harness hacking.

Oh and a decent sub recommendation for either one of these scenarios:

200 Watts x 1 @ 4-Ohm or
300 Watts x 1 @ 2-Ohm
?

Don't need to rock the block just going for better sq and volume than stock. I listen to everything except country and Bieber

Thanks!

jeepguy_1980 · 09-11-2012, 04:28 PM

If your amp supports high level inputs, I recommend both. Check out my thread

fsckedagain · 09-15-2012, 10:21 AM

Been in FL a couple days for work, so I missed the reply. My amp does not support high level inputs.

jeepguy_1980 · 09-15-2012, 11:04 AM

What amp do you have?

fsckedagain · 09-21-2012, 07:52 AM

Quote:

Originally Posted by jeepguy_1980

What amp do you have?

RF 600 5 channel

fsckedagain · 09-21-2012, 01:31 PM

Nevermind, I got smart and talked to Steve @******** and just ordered the non BA amp integration kit and some GLIs.

Along with an assload of other things lol

jeepguy_1980 · 09-21-2012, 09:21 PM

Quote:

Originally Posted by fsckedagain

Nevermind, I got smart and talked to Steve @******** and just ordered the non BA amp integration kit and some GLIs.

Along with an assload of other things lol

I wasn't aware of such a product.

fsckedagain · 09-22-2012, 08:26 AM

It's "new". I don't think he has actually let it out yet. In fact, he said I got the first one he made for sale.

This is the product I am talking about.

Steve@Subthump · 09-22-2012, 09:05 AM

I never officially posted them here because I was worried the demand would outpace the number of kits we could build. This is a lot different than the ba harnesses since most of the work is done in-house. When we get real busy, we may not have time to do them at all. So for now I just wanted to take it slow. I do have 4 more kits that will be finished next week if anyone needs one or has questions.

09-11-2012, 01:15 PM	#1
fsckedagain Drives: 2013 LS base model Join Date: Sep 2012 Location: Atlanta Posts: 16	ZISL/PAC what else? Non-BA system 2013 LS. Have a Fosgate 5 channel on the way and some Polk 6.5 DXi components on the way as well. Going to get Polk 6x9 DXi's in a couple days. I know I need one or the other, don't know which one is for me. Any insight into the pros and cons would be helpful. What else am I going to need? I am going to get some FatMat. I know I need a dist block. But are there any opinions on the best way to get signal to the amp from the factory stereo? Any special connectificators I need for the speakers? Wanting to keep it as clean and stealthy as possible with minimal harness hacking. Oh and a decent sub recommendation for either one of these scenarios: 200 Watts x 1 @ 4-Ohm or 300 Watts x 1 @ 2-Ohm ? Don't need to rock the block just going for better sq and volume than stock. I listen to everything except country and Bieber Thanks!

09-11-2012, 04:28 PM	#2
jeepguy_1980 Drives: 2010 Camaro 1SS Join Date: May 2010 Location: Newport News Posts: 1,310 View My Garage	If your amp supports high level inputs, I recommend both. Check out my thread

09-15-2012, 10:21 AM	#3
fsckedagain Drives: 2013 LS base model Join Date: Sep 2012 Location: Atlanta Posts: 16	Been in FL a couple days for work, so I missed the reply. My amp does not support high level inputs.

09-15-2012, 11:04 AM	#4
jeepguy_1980 Drives: 2010 Camaro 1SS Join Date: May 2010 Location: Newport News Posts: 1,310 View My Garage	What amp do you have?

09-21-2012, 01:31 PM	#6
fsckedagain Drives: 2013 LS base model Join Date: Sep 2012 Location: Atlanta Posts: 16	Nevermind, I got smart and talked to Steve @******** and just ordered the non BA amp integration kit and some GLIs. Along with an assload of other things lol

09-22-2012, 08:26 AM	#8
fsckedagain Drives: 2013 LS base model Join Date: Sep 2012 Location: Atlanta Posts: 16	It's "new". I don't think he has actually let it out yet. In fact, he said I got the first one he made for sale. This is the product I am talking about.

09-22-2012, 09:05 AM	#9
Steve@Subthump Account Suspended Drives: 2011 2SS IOM Vert Join Date: Aug 2009 Location: Indiana Posts: 1,096	I never officially posted them here because I was worried the demand would outpace the number of kits we could build. This is a lot different than the ba harnesses since most of the work is done in-house. When we get real busy, we may not have time to do them at all. So for now I just wanted to take it slow. I do have 4 more kits that will be finished next week if anyone needs one or has questions.