Mace cams ordered. - Page 47 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Tommo_27 · 10-17-2012, 03:47 AM

Quote:

Originally Posted by Yellow_Glide

Hi Tommo,

Glad to see you made the party!! Yes, 226/210 are being fitted now. We'll see how those work out and if it's not enough, then we might consider a swap to the 210 on the inlet side. Wonder if Steve could share his thoughts on what the gain expected might be on the 210/210 over the 226/210.

If I'm keeping track of the builds correctly, Tulkas has 226/226, I have 226/210, and you have 210/210. Have you been back on the dyno since the install?

Cams are not fitted yet. Hoping for install in early November.

Super keen for results from your car.

Yellow_Glide · 10-17-2012, 11:17 AM

Quote:

Originally Posted by Tommo_27

Cams are not fitted yet. Hoping for install in early November.

Lol!! Ok, isee how this works - "oh cams - you go first!" J/k.

It's all good.

One Sick Camaro · 10-17-2012, 11:42 AM

hoping your good so I can get mine in before i give up lmao

Yellow_Glide · 10-17-2012, 03:22 PM

Quote:

Originally Posted by One Sick Camaro

hoping your good so I can get mine in before i give up lmao

Lol!! Like you would give up! Ha!

Jarp · 10-17-2012, 11:39 PM

How's the fit gone Glide?

Yellow_Glide · 10-18-2012, 01:43 PM

Link to the thread with the current (today's) build

http://www.camaro5.com/forums/showthread.php?t=256270

Tulkas · 10-19-2012, 04:11 AM

This is my dyno run in 3rd gear, power is the same in 4th and 5th gear too:

pgustavson · 10-19-2012, 08:03 AM

Quote:

Originally Posted by Tulkas

I found a 2nd hand intake manifold from an LLT engine and I'm going to make a bracket so it can fit on my LY7 because the LY7 intake manifold has that stupid plenum spacer in it and it restricts the whole engine...

You're speaking of the plenum valve in the LV7 IM that is supposed to increase low-end torque, correct?

Quote:

Originally Posted by Tulkas

...I have in my possession the LLT intake manifold since yesterday, all i need now is to see how I'm going to design the bottom of it so it can fit on the alloytec. It should give at least 15-20hp and make the engine breath freely...

It will be neat to see how the torque curve changes.

Quote:

Originally Posted by Tulkas

This is my dyno run in 3rd gear, power is the same in 4th and 5th gear too:

Do you have the torque curve?

kuzman89 · 10-22-2012, 02:16 AM

Really need a before/after sheet with everything on it. Hopefully yellow glide will bring the goods this week!

SixCyl · 10-22-2012, 10:50 AM

I looked up the base numbers for a 2007 Holden commodore V6 se, base power is 180 kw, so assuming a 15% loss....the base power should be 153 kw, so 167 is pretty good. For HP this is 241 hp/ 204 rwhp base and 262 hp/ 224 rwhp. Not a bad gain. Especially if this is one of those mods that suffers very little from additional mods.

lscamaro · 10-22-2012, 10:54 AM

So.... When do we get some news Yellow_Glide

I think we are a little anxious

Yellow_Glide · 10-22-2012, 11:21 AM

Lol - you think you're anxious?!?! J/k - last time I talked to Matt was late Thursday night when they were thinking road trip. 17 mile trip was twofold: data logging and maybe some showing off.

lscamaro · 10-22-2012, 11:26 AM

I'm hoping they will chime in soon. I want to hear impressions!

Yellow_Glide · 10-22-2012, 12:13 PM

Just talked to Matt , no road trip. They are finishing up details do they can data log and send to Vince for some tweaking on he tune.

10-17-2012, 11:42 AM	#647
One Sick Camaro That Cam though... Drives: 11 Camaro 2SS 02 T/A WS6 15 SSV Join Date: Mar 2010 Location: NJ Posts: 2,817	hoping your good so I can get mine in before i give up lmao __________________

10-17-2012, 11:39 PM	#649
Jarp Drives: Commodore SV6 Join Date: Jul 2010 Location: Australia Posts: 67	How's the fit gone Glide? Last edited by Jarp; 10-18-2012 at 03:03 AM.

10-18-2012, 01:43 PM	#650
Yellow_Glide Drives: 2011 1LT "Chakita". 04 Yota Join Date: Jun 2011 Location: Round Rock, TX Posts: 823	Link to the thread with the current (today's) build http://www.camaro5.com/forums/showthread.php?t=256270 __________________ Hi, my name is Chakita. I have cams!!!! Build thread: http://www.camaro5.com/forums/showthread.php?p=3847083

10-22-2012, 10:50 AM	#654
SixCyl Drives: 2010 Camaro CGM V6 Join Date: Mar 2011 Location: Florida Posts: 694 View My Garage	I looked up the base numbers for a 2007 Holden commodore V6 se, base power is 180 kw, so assuming a 15% loss....the base power should be 153 kw, so 167 is pretty good. For HP this is 241 hp/ 204 rwhp base and 262 hp/ 224 rwhp. Not a bad gain. Especially if this is one of those mods that suffers very little from additional mods. __________________ El gato. Mods: Eagle eye headlights, 18" Axis Sport graphite, Roto-Fab cold air intake, Vmax ported TB, 3/8" Vmax Black-Ice, RX single valve catch can, RX breather, Pedders inserts, Trifecta tune, BBK LTH 304 SS. art/ärt/Noun. Definition: 5th generation Camaro.

10-22-2012, 10:54 AM	#655
lscamaro Drives: 2011 CGM Camaro LS A6 Join Date: Jan 2011 Location: San Antonio, Texas Posts: 10,305	So.... When do we get some news Yellow_Glide I think we are a little anxious __________________ Click Picture for Build Thread

10-19-2012, 04:11 AM	#651
Tulkas Drives: Holden ve sv6 2007 manual Join Date: Oct 2012 Location: Melbourne, Australia Posts: 29	This is my dyno run in 3rd gear, power is the same in 4th and 5th gear too:

10-22-2012, 02:16 AM	#653
kuzman89 Drives: Ly7 Join Date: Dec 2011 Location: bezza Posts: 253	Really need a before/after sheet with everything on it. Hopefully yellow glide will bring the goods this week!

10-22-2012, 11:21 AM	#656
Yellow_Glide Drives: 2011 1LT "Chakita". 04 Yota Join Date: Jun 2011 Location: Round Rock, TX Posts: 823	Lol - you think you're anxious?!?! J/k - last time I talked to Matt was late Thursday night when they were thinking road trip. 17 mile trip was twofold: data logging and maybe some showing off. __________________ Hi, my name is Chakita. I have cams!!!! Build thread: http://www.camaro5.com/forums/showthread.php?p=3847083

10-22-2012, 11:26 AM	#657
lscamaro Drives: 2011 CGM Camaro LS A6 Join Date: Jan 2011 Location: San Antonio, Texas Posts: 10,305	I'm hoping they will chime in soon. I want to hear impressions! __________________ Click Picture for Build Thread

10-22-2012, 12:13 PM	#658
Yellow_Glide Drives: 2011 1LT "Chakita". 04 Yota Join Date: Jun 2011 Location: Round Rock, TX Posts: 823	Just talked to Matt , no road trip. They are finishing up details do they can data log and send to Vince for some tweaking on he tune. __________________ Hi, my name is Chakita. I have cams!!!! Build thread: http://www.camaro5.com/forums/showthread.php?p=3847083