Roto-fab ZL1 NO TUNE intake is here!!!

[charlietuna]

Originally Posted by Roto-fab 1

The ZL1 intake system itself is finished. We are now working on an additional air inlet source which we hope to have finished and tested in the next couple of weeks.
Jeremiah

Ok Im a believer let me know when this is completed and I'll place my order. And this time I'll be more patient

[rpepka]

Looking to place order, looked on website and it says 2012.

I am assuming that it fits the 2013 as well?

[Roto-fab 1]

Originally Posted by rpepka

Looking to place order, looked on website and it says 2012.

I am assuming that it fits the 2013 as well?

Correct. A 2013 was used to produce the dyno #s on this thread.
Jeremiah

[JANNETTYRACING]

Originally Posted by 1MtnGoat

I thought Jannetty Racing said that the combo of CAI and pulley would require a tune.

Actually What I said was currently available CAIs need tuning, Things change daily just like in this case.

One or the other does not need a tune, together will be tested next week when I get back from SEMA.

Ted.

[The_Raging_Bull]

Originally Posted by tmandoug1

and either an ARE stage 3 dry sump or an AVIAID LS-D stage 5 dry sump...

[BlackinBlack]

Originally Posted by JANNETTYRACING

Actually What I said was currently available CAIs need tuning, Things change daily just like in this case.

One or the other does not need a tune, together will be tested next week when I get back from SEMA.

Ted.

Can't wait to see the results. Also if Ted backs up the Roto-Fab CAI produces the numbers posted above on a stock ZL1 it could be a great mod for those wanting to keep their warranties intact.

[JANNETTYRACING]

Originally Posted by BlackinBlack

Can't wait to see the results. Also if Ted backs up the Roto-Fab CAI produces the numbers posted above on a stock ZL1 it could be a great mod for those wanting to keep their warranties intact.

If all goes as Planned tomorrow is the Big Day.

[DangerZL1]

[FSTORG5]

[ZL1ster]

...subscribing.

I’ve read ‘tmandoug1’ mention a group buy…has that planted seed in this thread fermented and started to grow?

I’m getting THIS CAI…but I’m willing to hold out to help a group buyJ

[jimmy5]

I would be in for a group buy as well. subbed.

[rpepka]

I am waiting to see if the "no tune pulley" is compatible.

[DangerZL1]

Originally Posted by rpepka

I am waiting to see if the "no tune pulley" is compatible.

Me too, but I think a CAI would be an easier first mod since it doesn't void the warranty. Even if you can't safely use both without a tune, the CAI makes sense and can be installed or removed pretty easy. If you put a OD pulley on the car, the dealership might not be as forgiving if something happened to the engine.

[rpepka]

Originally Posted by DangerZL1

Me too, but I think a CAI would be an easier first mod since it doesn't void the warranty. Even if you can't safely use both without a tune, the CAI makes sense and can be installed or removed pretty easy. If you put a OD pulley on the car, the dealership might not be as forgiving if something happened to the engine.

How hard is it to remove the lower pulley?