2010 Camaro SEMA Car by Montage Motoring and Defenderworx - Page 22 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

BlaSSt Off · 06-12-2009, 05:12 PM

Are you guys just making the simple bolt over grilles or are you planning on making a real grille that you have to cut the original grille out? I would love to have the billet grille but I want one that replaces the factory plastic and sits back. Cut = Custom Bolt-ons are for beginners

Defenderworx · 06-12-2009, 05:32 PM

Quote:

Originally Posted by BlaSSt Off

Are you guys just making the simple bolt over grilles or are you planning on making a real grille that you have to cut the original grille out? I would love to have the billet grille but I want one that replaces the factory plastic and sits back. Cut = Custom Bolt-ons are for beginners

Well i guess we're beginners then...

Our Grilles go over the factory one.

vdevine · 06-13-2009, 11:55 AM

The question is when will the other items (besides sill and gas cover) be available.

Really want the partial or full grille and SS fender logos.

Just give us an idea...2 weeks, month, 3 months?

tones2SS · 06-13-2009, 12:21 PM

Quote:

Originally Posted by gac458

Can you do the bottom front grill the same as the attached picture in chrome? Just curious what the cost would be for both if & when they are available .

Thanks Greg

I agree fully. This is the best design in my opinion. Can/are you guys going to do the lower grill as well in chrome? I think that will balance it out very nicely!!

Defenderworx · 06-14-2009, 08:06 PM

Quote:

Originally Posted by vdevine

The question is when will the other items (besides sill and gas cover) be available.

Really want the partial or full grille and SS fender logos.

Just give us an idea...2 weeks, month, 3 months?

Within the next two weeks more products should be available and by the end of this month almost all of our products will be available for purchase including the Grilles. For more questions feel free to e-mail Brian Lillie at brian@defenderworx.com.

Defenderworx · 06-14-2009, 08:15 PM

Hey everyone, here are some pictures of our Chrom Reverse Light Bezels. They will be available in Black Powder Coat as well but i currently only have the pictures of the Chrome. The last picture shows the car with and without the Bezels so you can see the difference.

Defenderworx · 06-14-2009, 08:19 PM

Quote:

Originally Posted by tones2SS

I agree fully. This is the best design in my opinion. Can/are you guys going to do the lower grill as well in chrome? I think that will balance it out very nicely!!

Yes as i have said before, the Outline Grille will come in both the upper and lower portion. When we were taking this picture we had not yet fully made the lower portion and we had to move the car to a different shop so we just took the picture without it. When we sell the Grille it will come with both the upper and lower portion.

Defenderworx · 06-15-2009, 12:30 PM

Hey everyone, here are some pictures of our Chrom Reverse Light Bezels. They will be available in Black Powder Coat as well but i currently only have the pictures of the Chrome. The last picture shows the car with and without the Bezels so you can see the difference.

Defenderworx · 06-15-2009, 12:47 PM

Hey guys here are a couple pictures of the SS and RS badges on the Camaro in our shop. Keep in mind these pieces are still raw so they don't have the Chrome or Black Powder Coat finish, but it will still give you an idea of what they'll look like.

GJG · 06-15-2009, 01:13 PM

those look good!

ponycrusher21 · 06-15-2009, 01:18 PM

Quote:

Originally Posted by Defenderworx

Hey everyone, here are some pictures of our Chrom Reverse Light Bezels. They will be available in Black Powder Coat as well but i currently only have the pictures of the Chrome. The last picture shows the car with and without the Bezels so you can see the difference.

NO NO NO NO NO NO NO NO NO!!!!!!!!!

THE LIGHTS WERENT SUPPOSED TO BE THERE, DONT GLORIFY THEM

I CANT BELIEVE THIS!! I CANT BELIEVE THIS!!!!!

AHHHHHHHHHHHHHHH!!!!!!!!!

Defenderworx · 06-15-2009, 01:24 PM

Quote:

Originally Posted by GJG

those look good!

Thanks appreciate it.

Defenderworx · 06-15-2009, 01:24 PM

Quote:

Originally Posted by ponycrusher21

NO NO NO NO NO NO NO NO NO!!!!!!!!!

THE LIGHTS WERENT SUPPOSED TO BE THERE, DONT GLORIFY THEM

I CANT BELIEVE THIS!! I CANT BELIEVE THIS!!!!!

AHHHHHHHHHHHHHHH!!!!!!!!!

Calm down buddy, breathe, if you dont like them then they're obviously not for you...

moto-camaro · 06-15-2009, 01:25 PM

Quote:

Originally Posted by ponycrusher21

NO NO NO NO NO NO NO NO NO!!!!!!!!!

THE LIGHTS WERENT SUPPOSED TO BE THERE, DONT GLORIFY THEM

I CANT BELIEVE THIS!! I CANT BELIEVE THIS!!!!!

AHHHHHHHHHHHHHHH!!!!!!!!!

.......
it's a sema car.
this is what they do.
and it's not that bad, besides, it's available in black powdercoat as well i'd expect.
i actually kind of like the chrome bezel

06-13-2009, 11:55 AM	#297
vdevine Drives: 2010 Black SS Join Date: Jun 2009 Location: Virginia Posts: 605 View My Garage	When? The question is when will the other items (besides sill and gas cover) be available. Really want the partial or full grille and SS fender logos. Just give us an idea...2 weeks, month, 3 months? __________________ Vince SS2 Black with CGM Stripes 3800 Born: 25 May VIN#12136 6000 Mine 26 June 2009 SLP Loudmouth II, NOWEEDS, BMR 1.4/1.0 Lowering Springs, Cold Air Inductions Intake, Tune, Eagle Eyes w HID, SLP "SS" Grille Insert, Pistol Grip Shifter, Hawk PC Pads, RGB Scanner, Tint, Headlight Armor, Clear Bra, 22's.

06-14-2009, 08:15 PM	#300
Defenderworx Accessory Guru Drives: 2010 Chevrolet Camaro Join Date: May 2009 Location: Anaheim, Ca Posts: 516 View My Garage	Hey everyone, here are some pictures of our Chrom Reverse Light Bezels. They will be available in Black Powder Coat as well but i currently only have the pictures of the Chrome. The last picture shows the car with and without the Bezels so you can see the difference. Attached Images __________________

06-15-2009, 12:30 PM	#302
Defenderworx Accessory Guru Drives: 2010 Chevrolet Camaro Join Date: May 2009 Location: Anaheim, Ca Posts: 516 View My Garage	Hey everyone, here are some pictures of our Chrom Reverse Light Bezels. They will be available in Black Powder Coat as well but i currently only have the pictures of the Chrome. The last picture shows the car with and without the Bezels so you can see the difference. __________________

06-15-2009, 12:47 PM	#303
Defenderworx Accessory Guru Drives: 2010 Chevrolet Camaro Join Date: May 2009 Location: Anaheim, Ca Posts: 516 View My Garage	Hey guys here are a couple pictures of the SS and RS badges on the Camaro in our shop. Keep in mind these pieces are still raw so they don't have the Chrome or Black Powder Coat finish, but it will still give you an idea of what they'll look like. Attached Images __________________

06-15-2009, 01:13 PM	#304
GJG Drives: 2SS Join Date: Apr 2009 Location: Beaumont, Tx Posts: 871 View My Garage	those look good! __________________ Sleep well America.....my MARINE has your back......

06-12-2009, 05:12 PM	#295
BlaSSt Off Drives: 2SS/RS Join Date: May 2009 Location: Texas Posts: 586	Are you guys just making the simple bolt over grilles or are you planning on making a real grille that you have to cut the original grille out? I would love to have the billet grille but I want one that replaces the factory plastic and sits back. Cut = Custom Bolt-ons are for beginners