Noob upgrading suspension

[Dexman1349]

^^^ Would I need to get the upgraded end-link brackets if I upgrade the rear sways and endlinks?

[JusticePete]

Originally Posted by Dexman1349

^^^ Would I need to get the upgraded end-link brackets if I upgrade the rear sways and endlinks?

Our endlinks have a substantial boss, a wide landing area that helps distribute load. The incidence of rear arm tab failure is very low. If yours fail, call me and I'll send you a set of weld in tabs we have used to strengthen new arms and repair failed arms at no charge.

[Dexman1349]

Originally Posted by JusticePete

Does 0% Debt sound Better?

What are the terms of the 0%?

Minimum monthly payments? How long to pay off? Interest rate/fees if not paid off in time? I'd love to do something, but need more info first.

[JusticePete]

Originally Posted by Dexman1349

What are the terms of the 0%?

Minimum monthly payments? How long to pay off? Interest rate/fees if not paid off in time? I'd love to do something, but need more info first.

6 months 0%

No Interest and No Payments if the purchase price is paid in full within 6 months.

[Dexman1349]

Originally Posted by JusticePete

6 months 0%

No Interest and No Payments if the purchase price is paid in full within 6 months.

are there minimum monthly payments, or can I wait 5months & 29 days and write a check for the balance?

[JusticePete]

Originally Posted by Dexman1349

are there minimum monthly payments, or can I wait 5months & 29 days and write a check for the balance?

You can wait 5 months & 29 days and write a check for the balance.

[Dexman1349]

another annoying question:

Would I be better off with a 27/27mm swaybar setup or a 27/32mm?

[Rob@WretchedMS]

depends on the driver, and how the car will be used.
I'm on live chat on my site right now if you want to chat.

[Ponykiller511]

What year Camaro ?

[Ponykiller511]

Originally Posted by Ponykiller511

What year Camaro ?

I have a 12 and I love my Pfadt ZL Spec bars

[Dexman1349]

Originally Posted by Ponykiller511

What year Camaro ?

2010

[Dexman1349]

Originally Posted by Rob@WretchedMS

depends on the driver, and how the car will be used.
I'm on live chat on my site right now if you want to chat.

Thanks again Rob for your help last night. Sounds like I've come back to what I was originally thinking of doing:
Pedders Street Z inserts (already have the subframe, just need the radius arm)
Pedders 27/27 sways

Originally Posted by caverman

BTW: you should look into converting over to the new FE4 suspension while you're at it.

What is necessary to convert my 2010 2SS to a FE4 or FE5 suspension?

[Rob@WretchedMS]

The rear arms need to be changed out for the new ZL1 style arms.
They are included in our Conversion kits.

[Dexman1349]

What about something like this (not necessarily this exact brand, but these parts)?

http://www.lsrperformance.com/lsr-ch...ink-combo.html

Or is this too much?