********???

[Camaroshark]

Originally Posted by terry_b

My problem: I have a large 12" sub, a cleansweep that feeds a 4 channel amp, and a bridged 2 channel amp.

My solution: ******** 12" box in which the smaller amp will also mount, an amp rack for the opposite side of the trunk for the larger amp (4 channel), and possibly locate the cleansweep in the factory amp location.

Thoughts? I guess I could do the large box behind the back seat and mount everything to that... However I want to keep the pass through and keep the finish quality high.

Sorry for the picture-jacking it just looks so good!

Hehe it's cool.

Truth is, the box takes a 12.. There is a channel for the amp on my box. The opening you see is a cover. Wonder if you could mount the amp on the cover if Steve gave you a solid cover with no cut out.

Julio

[Camaroshark]

Originally Posted by CWI

Is that the Stealth enclosure from Steve?

Maybe Steve can answer this. At 1.2 cu ft, is the stealth adequate for the JL 12W7 which recommends a minimum 1.375? Does it inhibit the performance of the JL sub?

Yes, that's the stealth kit with add an amp harness from ********.

Julio

[terry_b]

Steve truly must be super busy... I managed to get one PM response from him the other night to the effect that the box is built to fit that certain amp/sub combo... And while I appreciate the concern, I did my homework. My amp has nearly the same dimensions and sub is slightly larger (+.5" mounting depth, +.625 diameter). Good call on the blank cover plate, I'd want to do something similar to the amp rack he sells.

I just want him to take my money!