Myles 416/YSi/Built 6L80E/JRE Rear Project - Page 4 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

NickJRE · 12-04-2012, 09:10 AM

OK here we go... The cage is done in Myles car now. JW Racing did a beautiful job on it. We ended up making a couple adjustments to the converter to get it where we wanted. We're in the process of getting his wheels and tires all set and strapping this thing down for a tune. After that track shakedown!

Name: ImageUploadedByTapatalk1354630000.808929.jpg
Views: 1531
Size: 177.1 KB

Name: ImageUploadedByTapatalk1354630000.808929.jpg
Views: 1531
Size: 177.1 KB

roshanill · 12-06-2012, 02:36 AM

The 3 series has been the benchmark to which all manner of vehicles are measured. The comparisons go beyond the likes of the A4, C-Class and S60 and include things like M3 vs Camaro, 328i vs Prius. There’s a problem with your largest volume product being put on this kind of pedestal: how do you redesign it? Carefully, mildly, infrequently and only when absolutely required. With increased competition from the Audi A4,

DarkCry956 · 12-06-2012, 10:56 PM

What's that red filter by the throttle body? Is that part of the JRE Vortech upgrade kit? What about catch cans is one gonna be installed?

2012BLKSS · 12-08-2012, 12:08 PM

Quote:

Originally Posted by roshanill

The 3 series has been the benchmark to which all manner of vehicles are measured. The comparisons go beyond the likes of the A4, C-Class and S60 and include things like M3 vs Camaro, 328i vs Prius. There’s a problem with your largest volume product being put on this kind of pedestal: how do you redesign it? Carefully, mildly, infrequently and only when absolutely required. With increased competition from the Audi A4,

LOL, huh?

Quote:

Originally Posted by DarkCry956

What's that red filter by the throttle body? Is that part of the JRE Vortech upgrade kit? What about catch cans is one gonna be installed?

I believe the lil red filter is part of the JRE upgrade kit. The Monster catch can should be installed, I see the 2 lines in the pic but not the can itself.

NickJRE · 12-10-2012, 12:07 PM

Quote:

Originally Posted by DarkCry956

What's that red filter by the throttle body? Is that part of the JRE Vortech upgrade kit? What about catch cans is one gonna be installed?

Yep this car is getting the RX Monster Catch Can, actually it's already installed

The red filter is a crankcase breather

DarkCry956 · 12-13-2012, 05:01 PM

What injectors are being used in this build?

NickJRE · 12-17-2012, 07:27 AM

Quote:

Originally Posted by DarkCry956

What injectors are being used in this build?

We're using ID-850's for this particular build.

Sikoriko · 12-18-2012, 05:43 PM

You must have fired it up by now, I think I heard it from here?

NickJRE · 12-19-2012, 08:20 AM

New wheels these things look killer in person!

Name: ImageUploadedByTapatalk1355923128.666191.jpg
Views: 1290
Size: 182.5 KB

We have fired it up, drove it, broke it in. Not a whole lot left!

trewyn15 · 12-19-2012, 01:38 PM

Wow those wheels are huge! Looking good so far

fastsspr · 04-14-2013, 02:14 AM

Any update in the car?

NickJRE · 04-15-2013, 03:25 PM

Hey guys, You can see the final results of the build here.

416 MONSTER 881 RWHP/735 RWTQ

SmokedSS · 04-14-2014, 01:10 PM

Awesome setup!! I see you are running a built 6L80e. I would like to do the same. What kind of success are you having at this power level with the tranny? I see its been about a year so you may have some of the best data out there ?? I plan to end up around 750-800 rwhp and rwtg.. PM me if you would prefer..

thanks any help would be greatly appreciated..

12-06-2012, 02:36 AM	#44
roshanill Drives: gray white Join Date: Dec 2012 Location: uk Posts: 5	The 3 series has been *the* benchmark to which all manner of vehicles are measured. The comparisons go beyond the likes of the A4, C-Class and S60 and include things like M3 vs Camaro, 328i vs Prius. There’s a problem with your largest volume product being put on this kind of pedestal: how do you redesign it? Carefully, mildly, infrequently and only when absolutely required. With increased competition from the Audi A4, __________________ sell my car online

12-19-2012, 08:20 AM	#51
NickJRE Drives: Nothing Fun. Join Date: Aug 2009 Location: CT Posts: 1,052	New wheels these things look killer in person! We have fired it up, drove it, broke it in. Not a whole lot left!

12-19-2012, 01:38 PM	#52
trewyn15 Drives: 2004 Monte Carlo LS Join Date: Nov 2012 Location: Janesville, WI Posts: 2,414	Wow those wheels are huge! Looking good so far __________________ 2004 Monte Carlo LS - 1966 AMC Rambler Rebel Classic - 2000 Trans Am WS6

12-04-2012, 09:10 AM	#43
NickJRE Drives: Nothing Fun. Join Date: Aug 2009 Location: CT Posts: 1,052	OK here we go... The cage is done in Myles car now. JW Racing did a beautiful job on it. We ended up making a couple adjustments to the converter to get it where we wanted. We're in the process of getting his wheels and tires all set and strapping this thing down for a tune. After that track shakedown!

12-06-2012, 10:56 PM	#45
DarkCry956 Drives: 2011 Camaro 2SS/RS Join Date: Oct 2011 Location: Texas RGV Posts: 794	What's that red filter by the throttle body? Is that part of the JRE Vortech upgrade kit? What about catch cans is one gonna be installed?

12-13-2012, 05:01 PM	#48
DarkCry956 Drives: 2011 Camaro 2SS/RS Join Date: Oct 2011 Location: Texas RGV Posts: 794	What injectors are being used in this build?

12-18-2012, 05:43 PM	#50
Sikoriko Drives: 2011 V6 IOM Join Date: Jul 2012 Location: San Diego Posts: 1,385 View My Garage	You must have fired it up by now, I think I heard it from here?

04-14-2013, 02:14 AM	#53
fastsspr Drives: Red SS Join Date: Mar 2010 Location: P R Posts: 21	Any update in the car?

04-15-2013, 03:25 PM	#54
NickJRE Drives: Nothing Fun. Join Date: Aug 2009 Location: CT Posts: 1,052	Hey guys, You can see the final results of the build here. 416 MONSTER 881 RWHP/735 RWTQ

04-14-2014, 01:10 PM	#55
SmokedSS Guest Drives: 2011 2SS / RS A6 Join Date: Oct 2011 Location: Moving On Posts: 464 View My Garage	Awesome setup!! I see you are running a built 6L80e. I would like to do the same. What kind of success are you having at this power level with the tranny? I see its been about a year so you may have some of the best data out there ?? I plan to end up around 750-800 rwhp and rwtg.. PM me if you would prefer.. thanks any help would be greatly appreciated..