Any non splicing method of adding a sub to my NON BA RS system?

[Firebreed]

Originally Posted by SirZeusor

any splice disrupting the original media material....meaning the direct connection of the wire will impact the quality of ANY signal.
I dont care if its audio signals or power flow.
a splice is a splice
the best option is to always run new wire for a direct connection.
harnesses are nice and easy but they still in fact impact the signal because of the material the contacts are usualy made of.
for example: those wire taps have a crappy piece of metal in them that makes the connection.
so you just took your nice copper wire and made a splice to a crappy piece of steel and then back out to the nice copper wire.
we all know copper is a very good conductor hence why it is used in speaker wire for its ability to let signals travel from point A to point B.

just a few facts

I would have made the same post.. but the OP seemed like he was intent on spliceing... Just tryin to steer him away from those T-taps/Vampire taps