Voice Your Comments/Suggestions/Input for Focus Group on 2010 Camaro - Page 15 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

camaromissie · 04-05-2008, 04:24 PM

Please keep the new camaro affordable, and have alot ready to sell cuz we are going to buy them!!!

*TAG UR IT* · 04-06-2008, 01:06 AM

NO VINYL STRIPES!!! PAINT PLEEEEEEZE!

Sweeper · 04-06-2008, 02:38 AM

Based on all the feed back from the members of this board....

The new Chevy Camaro will look like this:

Thank you for participating in the focus group.

balonywolf · 04-06-2008, 11:19 AM

How bout a fold-flat front seat?

*radz28* · 04-07-2008, 09:40 AM

I didn't see this on the list above, but how about leaving enough room for larger tires, front and rear; something like 275s up front and 315s in the rear. If it were even possible to make it to where it only took a little "massaging" to fit them, that'd be sweet!!! I was able to fit 335s in my 4th Gen. with a little massaging. I'd hate to be stuck with tiny wheels/tires like the GTO.

*radz28* · 04-07-2008, 09:44 AM

OH; and another thought:

Please keep the flat-black plastic trim to a minimum. For example, I HATE the cowl on my 4th. Gen. because that plastic just fades and is hard to keep looking good. Some Mothers Back-to-Black works well, but washes off, and it's just my humble opinion that the perception of the car would be better the less plastic exterior trim is on it. The same with fenders, and other panels on the car; please keep them metal. I'd be happy to trade some weight for metal panels.

Thanks again.

Mythic · 04-07-2008, 10:43 AM

I'm voting for Carbon Fiber. Light strong and looks good with a black car and holds paint

wild_weasel · 04-07-2008, 10:49 AM

Quote:

Originally Posted by Mythic

I'm voting for Carbon Fiber. Light strong and looks good with a black car and holds paint

but carbon fiber = $$$ which =

I think some aftermarket stuff will be out there as far as CF goes. It does look really good in my opinion.

SScott · 04-07-2008, 03:29 PM

If someone has already posted this idea, forgive me. How about a "track-ready" version, with no A.C., no radio, no power accessories, except brakes and steering. How about a "Drag Pack", with a blown LS3 that weighs 3,300LBS?

Emher · 04-07-2008, 03:57 PM

Gonna add one thing what with the Nurburgring pics: please don't give all of Europe the amber lights in the back. We don't need them here in Sweden and would be nice to not have to mod them.

GothamCamaro · 04-07-2008, 04:12 PM

Quote:

Originally Posted by SScott

If someone has already posted this idea, forgive me. How about a "track-ready" version, with no A.C., no radio, no power accessories, except brakes and steering. How about a "Drag Pack", with a blown LS3 that weighs 3,300LBS?

I forgive you SScott.

There won't be a track-ready version as you listed, one of the inside sources has said as such. Sorry!

GothamCamaro · 04-07-2008, 04:13 PM

Quote:

Originally Posted by Sweeper

Based on all the feed back from the members of this board....

The new Chevy Camaro will look like this:

Thank you for participating in the focus group.

Does it at least come in black?

coolcamaroZ28 · 04-07-2008, 05:18 PM

Since no-one has mentioned it and this may be our last shot at any changes, here's where I think the reverse lights should go. Instead of the silver-painted trim ring around the tails, make them light up white with fiber optics or something, this way, it will look more integrated and keep the look similar to the concept (sorry for the crude illustration)...

Warghost · 04-07-2008, 06:27 PM

Quote:

Originally Posted by radz282003

I didn't see this on the list above, but how about leaving enough room for larger tires, front and rear; something like 275s up front and 315s in the rear. If it were even possible to make it to where it only took a little "massaging" to fit them, that'd be sweet!!! I was able to fit 335s in my 4th Gen. with a little massaging. I'd hate to be stuck with tiny wheels/tires like the GTO.

Good point.

04-06-2008, 11:19 AM	#200
balonywolf Drives: 1996 Jeep Cherokee Join Date: Sep 2007 Location: Raleigh, NC Posts: 368	How bout a fold-flat front seat? __________________ HAIL REDSKINS!

04-07-2008, 09:40 AM	#201
radz28 Petro-sexual Drives: Ultra-Grin Join Date: Oct 2006 Location: Crazy Coast Posts: 15,860	I didn't see this on the list above, but how about leaving *enough room for larger tires, front and rear*; something like 275s up front and 315s in the rear. If it were even possible to make it to where it only took a little "massaging" to fit them, that'd be sweet!!! I was able to fit 335s in my 4th Gen. with a little massaging. I'd hate to be stuck with tiny wheels/tires like the GTO. __________________ '20 ZL1 Black "Fury" A10, PDR, Exposed CF Extractor Magnuson Magnum DI TVS2650R // RFBG // Soler 103 // TooHighPSI Port Injection // THPSI Billet Lid // FF // Katech Drop-In // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs

04-07-2008, 09:44 AM	#202
radz28 Petro-sexual Drives: Ultra-Grin Join Date: Oct 2006 Location: Crazy Coast Posts: 15,860	OH; and another thought: Please keep the flat-black plastic trim to a minimum. For example, I HATE the cowl on my 4th. Gen. because that plastic just fades and is hard to keep looking good. Some Mothers Back-to-Black works well, but washes off, and it's just my humble opinion that the perception of the car would be better the less plastic exterior trim is on it. The same with *fenders, and other panels on the car; please keep them metal*. I'd be happy to trade some weight for metal panels. Thanks again. __________________ '20 ZL1 Black "Fury" A10, PDR, Exposed CF Extractor Magnuson Magnum DI TVS2650R // RFBG // Soler 103 // TooHighPSI Port Injection // THPSI Billet Lid // FF // Katech Drop-In // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs

04-07-2008, 05:18 PM	#209
coolcamaroZ28 Camaro Addict Drives: 2010SS/1995 Z28/2005 CTSV/2007 TBSS Join Date: Jan 2007 Location: New Jersey Posts: 220	Reverse lights Since no-one has mentioned it and this may be our last shot at any changes, here's where I think the reverse lights should go. Instead of the silver-painted trim ring around the tails, make them light up white with fiber optics or something, this way, it will look more integrated and keep the look similar to the concept (sorry for the crude illustration)... Attached Images

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Camaro Product Manager - interview	Moose	5th Gen Camaro SS LS LT General Discussions	11	04-04-2012 06:10 PM
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 07:33 PM
Official Camaro Convertible CONCEPT Press Release	Tran	Camaro Convertible Forum	12	11-18-2009 07:05 PM
Camaro (concept) Press Release!!	Pencil.Fight	5th Gen Camaro SS LS LT General Discussions	4	07-21-2008 03:33 PM

04-05-2008, 04:24 PM	#197
camaromissie new stoked menber! Drives: 95 Maxima (for now) Join Date: Apr 2008 Location: Venice Fl. Posts: 1	Please keep the new camaro affordable, and have alot ready to sell cuz we are going to buy them!!!

04-06-2008, 01:06 AM	#198
TAG UR IT www.Camaro5store.com Drives: 2014 ZL1 #705 Join Date: Jul 2006 Location: SA, Texas Posts: 26,544	NO VINYL STRIPES!!! PAINT PLEEEEEEZE!

04-06-2008, 02:38 AM	#199
Sweeper Drives: 2008 Suburban Join Date: Jan 2008 Location: Las Vegas, NV Posts: 40	Based on all the feed back from the members of this board.... The new Chevy Camaro will look like this: Thank you for participating in the focus group.

04-07-2008, 10:43 AM	#203
Mythic Drives: '03 Monte Carlo SS Join Date: Mar 2008 Location: VaBeach VA Posts: 348	I'm voting for Carbon Fiber. Light strong and looks good with a black car and holds paint

04-07-2008, 03:29 PM	#205
SScott Drives: 21speed Join Date: Mar 2008 Location: Los Angeles, CA. Posts: 10	If someone has already posted this idea, forgive me. How about a "track-ready" version, with no A.C., no radio, no power accessories, except brakes and steering. How about a "Drag Pack", with a blown LS3 that weighs 3,300LBS?

04-07-2008, 03:57 PM	#206
Emher Pillaging Viking Drives: Saab 9-5 '99 (Hey it's a GM!) Join Date: Oct 2007 Location: Sweden Posts: 1,189	Gonna add one thing what with the Nurburgring pics: please don't give all of Europe the amber lights in the back. We don't need them here in Sweden and would be nice to not have to mod them.